Find a professional gate installation in Camp Hill

Under house fencing turned into a gate to allow access to under house.

We need a side gate and short fence section supplied and installed at our home. Gap between fence and house is approx 2.5m (and would like a gate that is hopefully approx 2.0m in width). Scope: • Supply a large prefab gate (eg Bunnings or similar) + hinges + latch + galvanised post + wood pailings + fixings. • Install gate with hinges on the right-hand side (may need gal post fixed against retaining wall or set in ground). • Add pailings to gate to bring height to approx 2.0m. • Fit latch. • Attach about 6.0m of 1.2m-high pailings to an existing fence. Open to suggestions too if there’s an easier or better way - we’re easy to work with, easy access to work area and parking. Looking to get it done before 23 Aug so we can secure side of house. Any questions please let me know. Cheers John

We need someone to remove our current driveway sliding gate motor and install a new VEVOR 1800KG 4m motor kit: https://www.vevor.com.au/automatic-gate-opener-c_10530/vevor-sliding-gate-opener-automatic1800-kg-4-m-gear-track-750w-remote-control-p_010913436587 - Existing mHouse motor is functional but being upgraded - New motor’s mounting holes do not align - Dynabolting will be required (you’ll need to drill new mounts into concrete) - You’ll need to supply new mounting brackets or fabricate/adapt what’s needed - Power already available at the site - We’ll handle remote/app setup after install See attached image for the setup: - White aluminium sliding gate (approx. 4–5m width) - Clear, flat concrete base - Existing motor base is boxed and accessible You must have: - Experience installing sliding gate motors - Your own tools (hammer drill, dynabolts, angle grinder if needed) - Ability to measure and level the motor cog with the rack

I would like a metal security gate acid dropped or sand blasted to remove paint and rust. 210cm x 110cm. I am located in Camp Hill so can be done on-site or taken away to be done. If the price is unrealistic then please advise what the cost would be please as I have no idea. Thanks

Gate to the Fence needs to be rehung to open outwards instead of inwards to the pool area ( for non-compliance). Needs to also close and lock into the pool safety latch by itself

Hi, this timber side gate with a metal frame sags to the right, and is now rubs heavily on the latch pole. Top LH hinge needs moving to the left around a centimetre and re attaching. Latch bar may need fixing.

Approximately 900x1600 40x40 box with 20 ml spacing

I am looking for someone to source and install a side gate at our house. Preference timber that can be painted white. Width is 2m and would like 1.8H . There is a 50cm x 50cm overhang on one side of the fence (garden beneath the side of the house) that also needs to be filled in.

Car headlights wont turn on. Change bulbs and fuses but need someone to come diagnose and fix what i assume is an electrical fault. Highbeams come on if you "flash" lights back but not forwards and side lights turn on as normal.

I small piece of fence and a gate built. It encloses a space at our business. gate approx 1800mm high by 850 wide. Fence return 800mm long. Materials supplied, need tools.

Install a latch gate with picket palings at top of external stairs.

We have a side gate that our dog escaped under. We need someone to build or attach something to the bottom to prevent this from happening. It will need to be opened and closed so bins can be taken out etc so functionality of the gate needs to remain. Let me know thoughts and offers!

Hand a pool gate, aluminium pool gate

Needing quote as cheap/easy as possible for job please due to limited funds but needing to move in next week. I Need fence with side gate. I can get materials if You give me a list of what’s needed to make it cheaper. Ideally posts go in on 14th and rest 15/16th. - Due date: Before Monday, 18 September 2023

Remove 2 chrome badges, one from front one rear and then install 2 black badges which I provide. - Due date: Flexible

Install 2x electricgates. - Due date: Flexible

Front gate is broken off hinge - Due date: Before Friday, May 26, 2023

Reattach large timber gate to exterior of downstairs store room - Due date: Before Friday, 5 May 2023

Hi, looking for someone to remove gate support which has 3 x Bolts. Lift it up about 3cm, drill three new holes and secure. Then drill two holes and screw in a D Pattern Stainless Steel Latch. - Due date: Before Sunday, 5 February 2023

My electric swing gate isn’t working - Due date: Flexible