Find a local floorboard profesional in SA

Needing chevron timber floorboards installed in our house renovation Price will reflect your quote*

50 SM laminate floorboards installed on existing kitchen, hallway and family room. Beading is required. All materials will be supplied. Experience is a must.

Sanding and varnish floor boards in kitchen the lyno just lifts off not stuck on surface

Remove old boards install new ones 14m2

Looking for someone with experience sanding timber floors to help sand hundred year old Jarrah floorboards. Total area is around 350 square metres. We already have a floor sander and basic gear. Just need someone who knows how to work with old timber and can get a good, even finish without damaging the boards. Job is in Port Adelaide. Looking for this to start straight away. Happy to pay hourly or day rate depending on experience. If you’ve worked on heritage or older floors before, let me know.

I need a floor board replaced and I have spare ones. To get to it will need to remove a piece of skirting board and take out 3 floor board to get to the damaged one. Replace with a new one and then put the other three back in place. Then put skirting board back and do paint touch up if needed

Need floorboards installed to caravan floor anytime the week of 12th Jan . I have all floorboards and underlay ready to go. No need to supply just install

You need to have tools to install 12 sqm floorboards in the kitchen. Can lay on existing kitchen floor. I have bought floorboards and underlay. Job site: Somerton Park Ground floor unit.

Subframe done. Deck boards need to be installed.

I have timber look hybrid floors I need to be installed in four bedrooms I walk in robe and a hallway ASAP

3.5m2 Hybrid Floor Boards need installing

6.5 mm Hybrid floorboard in 3 bedrooms installation to be done 40 sq mt, including underlay, scotia and door trims.

To install the skirting board of 24 meters in the city centre of adelaide

Cut and scribe skirting boards for lounge, family room, passage way and study nook. Optional install also

I have a couple of panels in my campervan that need to have laminate replaced or covered. I have the matching laminate in the form of a .7 mm sheet pre-glued. (Goes on with a heat gun or iron). I am seeking someone who is experienced with laminate and can cut to size, prepare the surface and glue on the new laminate.

I need skirting board replaced in a living room. One part of the board will need to have height cut shorter. Original skirtings are there ready to be used. Price to be negotiated

I need to replace damaged floor plank. Damaged parts are around 7 laminated planks and I have 8 of them. 3 for moisture damage, 3 for little chip and 1 for deep and big damage. This job is labour only . Please let me know your minimum charge and hourly rate. (* this is Laminated wood floor)

Floor board needs to be repaired

Looking for an experienced timber floor installer capable of completing the following tasks: 1. Remove and replace damaged floorboards 2. Level the subfloor (concrete base) and install matching timber boards 3. Sand and stain the boards 4. Apply sealant to finish the surface Project Details: Area to level and lay new boards on top of concrete: approximately 1 m² Area to be sanded and stained: approximately 17 m² Flooring Type: Natural wood

I need a few of my water damaged floor boards professionally replaced around my fridge and the surrounding damaged skirtings (I already have the floorboards)