Find experienced local fencing contractors in Ringwood VIC

Boundary fence was hit by fallen branch in Feb. Took OC four months to get back claiming that’s my issue. Now it’s leaning more towards my neighbor. I need to get a quote and get this back to my neighbor. Please comment with your quote and what’s included. Photos are taken in Feb and now.

We are looking for a picket (or similar) fence approx 7m x 1m high with a gate installed at the side of our house.

Hi, we need to build a 7-9M length ,90 cm height white pvc fence with a small entrance gate. Example in second picture

Leaning timber fence needs straightening or replacement of rotted posts. Trim branches if needed. Cut old timber to fit in green bin, no removal required.

80m of standard boundary fencing. Flat Block.

Wooden fence for 1 side of property 1.95m high

Fence Repair Required Looking for an experienced fencer to repair and straighten an existing fence. Fence panels are in place — work needed includes: Straightening leaning fence sections Re-aligning / reinforcing posts Securing existing panels.

It is only 2m wide. I don't mind timber or colour bond whichever is cheaper and the HWS needs to be secured to the new fence.

Part of the fence extension fell off after strong windy day. Need to be put up if can. The fence is leaning slightly need to be secured. Need experienced tasker know how and what materials to get if required. Need to have it repaired by the end of this weekend.

I need help to build a horizontal-slat Ekodeck front fence: • Total length: ~17 m • Left run: ~4 m • Driveway opening: ~3 m (double swing gates) • Right run: ~10 m • Height: ~1.2 m • Material: Ekodeck 67 × 15 mm composite slats (supplied) • Posts: H4 treated pine, spaced about 2.7 m centres (some existing posts may be reused) • Site: Slight slope, easy access. Scope of work • Set and concrete all posts (including 2 heavy-duty gate posts) • Assemble and install two swing gate frames • Cut and fix horizontal slats with consistent 5 mm gaps • Ensure everything is plumb, level and neatly finished. I will supply: Slats, posts (new and reusable), gate-frame kits, screws and hardware. You provide: Labour, tools (auger, levels, saws, etc.), and advice

To create a door on a wooden fence, and install a simple cabin hook from the back, it needs to be at least one metre wide, and the original height and colour must remain unchanged.

Remove and replace an existing treated pine paling fence. * Location: Ringwood VIC * Length: Approximately 15 meters * Height: 1.8m * Style: Standard treated pine paling * Existing fence: Needs to be removed and disposed of * Access: Easy access * Terrain: Slight slope * Neighbour agreement: Confirmed * Materials: Please quote with and without supply of materials

We are looking for an experienced and reliable handyman or fencing contractor to repair our timber fence. The job involves two main tasks: * Repairing a section where the palings and horizontal railings are broken. * Straightening and securing a separate section of the fence that is leaning slightly. Please provide a comprehensive quote that includes: * A breakdown of costs for labour and materials. * Confirmation that rubbish removal is included. * Your estimated timeframe to complete the work. * Your earliest availability to start. Thank you for your consideration. We look forward to receiving your quote.

Picket fence, rails and posts need replacing. Some posts may be able to be salvaged with metal supports and concreted into place. Approx 50m of fencing is in need of attention.

I need 5 fence post straighten up to hold the fence. The property is in Maidstone Street Ringwood. One side of the gate needs connecting to the existing pole as well. This is a temporary fix, the whole fence will be taken down in 6 months. Need to make sure the old fence not going to fall on to the foot path until then. The least cost option is preferred

Description – 20m Long 2.3m/2m High Stepped Colourbond Fence with TP Timber Sleepers in Monument Amount - 10 x Steel Posts. - All steel posts will be longer to account for higher fence. - Post Holes to be dug at 600mm - 700mm depth approx. - All Steel posts to be concreted into the ground with 2 x 20kg bags of high-grade strength 40mpa concrete per post. - 200mm x 50mm Treated Pine Timber Sleepers. - Channels will have to be dug into the ground for sleepers. - Panels will all be in Wavelok Style. - 5.5 Panels will be 2.3m high and 2.5 panels at 2m high in colour Monument - All rails and posts will be in colour Monument - Removal and Disposal of existing Timber Paling Fence – Including Tipping Fee’s.

Car was written off as repairable write off. Airbags did not go off. Car is sentimental need to fix snapped cross member and railing alignment so it’s ready for VIV Let me know of any good panalbeaters and Can Talk price

The some of the fence timber is rotten and the paling is come off. Would like to see how much does it cost to fix it /replace it ?

Need site plan to build a front fence. Since the height of the proposed fence (1.5 m) will be over the regulated council height of 0.9m, a dispensation permit is required from the council. Site drawing/plan of the fence is hence required

35 m timber fence that is visible to foot traffic