Find experienced local fencing contractors in QLD

My dog is trying to dig under the fence to escape - wanting to somehow secure it.

Needing a gate to be built into garden.

The person have get all materials to make the shade oneself

GARDEN EDGE CUT 30 MILLIMETRES OFF THE BRICKWORK GATE POST TIMBERS CUT OFF APPROXIMATELY 160 MILLIMETRES ABOVE GROUND LEVEL.

To dig holes for fence posts

Project Overview I need a sturdy, pest-proof enclosure built over an existing 8 m × 4 m garden bed so that insects, birds and small animals can’t reach my growing produce. I’ll supply the 2.4 m RHS steel posts and instant-mix cement; I will pay for materials. Scope of Work 1. Frame Installation Posts: Set ten (or as required) 2.4 m RHS steel posts into concrete footings around the 8 × 4 m perimeter. Spacing & Layout: Posts should be spaced roughly 1.5–2 m apart to support side rails and netting securely. Concrete Footings: Use instant-mix cement to anchor each post plumb and level. 2. Side Rails & Support Rails: Install horizontal timber or metal rails between posts at two heights (e.g. 0.5 m and 2 m) to attach netting. Bracing: Add diagonal braces or top cross-members to stiffen the frame and prevent sagging. 3. Pest-Proof Covering Netting: Secure fine-mesh insect netting (2 mm mesh or smaller) tightly around all sides and over the top to keep out birds, insects and small mammals. Access: Build one wide lockable hinged or removable door/section for easy entry, harvesting and maintenance. Wheelbarrow should fit comfortably. 4. Finish & Weatherproofing Fixings: Use corrosion-resistant screws, bolts and clips suitable for outdoor use. Sealing: Ensure any timber is treated or painted for exterior exposure (I can supply paint), and netting edges are neatly trimmed and secured.

Repositioning of existing colorbond fence and the addition of a side fence and gate and cane toad defence.

Around 20 meters of low lying fence for garden area with posts going into concrete, and dug into dirt. 1 or 2 gates / entrance points. Style same as fence in picture with 2 top railings and link fence below - however just not as high as the picture fence, smaller version. Budget is only to post job - quote what you feel it would cost.

Need to fix garden gate, we can't lock it, ?need extension

Needing two garden fences put in with gates, first fence will be 3m other fence is 2.3m (materials will need to be supplied) - Please see photos for reference

As described. Remove and install single side gate .

The timber garden gate urgently needs repair. The supporting post at the base has become loose, and the central post shows a large crack in the wood. As a result, the gate has fallen over. Immediate repairs are required to secure the loose post and either reinforce or replace the damaged central post to restore the gate’s stability and functionality.

1 post of trellis has fallen over and pulled out of the ground. Needs to be stood up and concreted and/or braced.

2 fences with gates for animal enclosure, and boundary fencing to contain dogs to part of garden. Will need to view to quote.

AirTasker Ad: Replace 3 Fence Posts (Side Garden Fence) Looking for a skilled handyman to replace 3 fence posts. The job will require digging under a slab from the neighbor's side to access and remove the old posts. Or erecting new posts from neighbours side. There are 4 steel posts on site if required. Details: Remove and replace 3 posts. Digging under a slab required for access. Must have own tools and materials (if needed, we can discuss supplies). Careful work to avoid damage to surrounding areas. Please provide your experience, availability, and quote. Flexible with timing but would like it done soon!

Hi. We need to get 2 old style garden gates fixed to make them close better. I tried to fix the latch on one of them but it wasn't great. Please can you let me know approximate cost and availability. Thanks, Wes

Wire trellis installation on back timber fence

Hi there, Anyone is qualified to help me to build and install the timber garden fence at my cafe. You would need to measure the area.

I need 4 steel sleeper posts installed for a timber sleeper garden wall. I’ve already dug holes to 450mm deep by these will need to be 600mm deep. Posts will be 1200mm high I don’t have the right spade to dig deeper. Ideally, whoever does this will have a laser level or some way to ensure the posts are installed at the right height. I will supply posts and premix concrete. Just need someone’s skill to put the posts in correctly. I wouldn’t expect this to take more than 2 hours for someone with the right tools and experience.

I’m looking for a professional to inspect two fences that are in poor condition: The fence next to the pool, which is deteriorating. The garden fence, which came loose after a palm tree fell on it during last year’s storm. The payment for this task is only for the inspection. After the inspection, I expect a detailed quote for either repairing or replacing the fences.

My dog is trying to dig under the fence to escape - wanting to somehow secure it.

Strong dog fence needed for 2 cattle dogs need it to be 1800 high weld-mesh and hardwood. Also needing colour bond supplied and installed happy to negotiate price

- take out existing colorbond fence - install the colorbond fence with new posts at a different location

Just moved in to house and it’s sitting on concrete stumps. We don’t want dogs going under the house so we need someone to ride dog wire. I have the wires purchased already.

I need around 100m of rectification to a 1.8 meter fencing. They were completed not straight and rectification of a cement retaining wall.

I need a dog gate installed Can supply or you can also supply Length is about 3m

We need a low wood fence (1-1.2m tall) fence to enclose a dog run in our backyard. It will need two gates for access. Approximately 25m fence length total. Photo of the area to be fenced.

Needing this pet gate installed on a bedroom door upstairs.

Sheep going on to neighbouring property No idea how much and a quote would give me an idea

Wanting someone to come and measure the back fence and go buy plywood and screws to board up the back fence as well as place/screw it to the fence. New neighbours dogs are harassing mine and want the fence blocked out. The fence is behind a hedge. Price is negotiable.

We need internal dog fencing with one yard, 5mx4m and 1200 high. Open to ideas of fencing material, needs to be secure as it’s for two little dachshunds.

In need of temporary dog fencing installed around certain areas of my yard for my 9 week old puppy. Dog mesh and stakes will be available

50-100m of fencing. Just need staples hammered in on top rail to hold fence up- 30minutes work tops

I need a dog proof gate for back end and also one in the front under the existing gate where there is an opening. I want to make sure the price includes labour and material. I would prefer if this can be done either on thursday or friday this week. I have attached the pictures for front and back section. The height of gate need not be that big as we have is a puppy so probably half a meter.

Make a proper door for dogs between 2 unit .

Looking for a handyman to build a pet fence and gates for a small areas beside our house. We have a gate that also needs to be repaired.

Drill bracket extensions onto fence .

I need someone to put up a catnet on the fence as per photo I have all the materials just need it put up. Im open to offers so keeping the budget low on here

Install Railway Sleeper Under Colorbond Fence to Puppy-Proof Backyard Task Description: We need a railway sleeper (or similar solid timber/treated pine) installed along the bottom of our Colorbond steel fence to prevent our puppy from escaping. The gap underneath the fence currently allows room for digging or slipping through, so the goal is to create a secure barrier along one side of the fence line (approx. estimated length 2-3m). Details: • Fence type: Colorbond steel • Task: Excavate shallow trench (if required), place and secure railway sleeper flush along the base • We’re happy to purchase the sleeper ahead of time, or you can supply and include it in your quote • Access: Easy side access to the fence • Preferred completion date: ASAP Outcome: A neat and secure install that ensures no gaps are left for our dog to dig or escape under the fence. Please bring: • Tools to cut, dig, and secure sleeper in place • Experience in similar fencing/landscaping tasks preferred

I brought a dog house for my frenchi and cannot build it as I don’t have the tools drill etc and have no clue what I’m doing need help.

I want to extend colorbond fence by 2 panels on each side and move 3 panels and repost.

Extend the fence to 8m with colorbond fence

Need to install this Colorbond fence on the garden. Just at front of those bushes that will be removed before the installation. The mailbox will also be removed. It is straight approximate 7.5mts with no doors as both sides have driveways that will remain open. See photos.

I’ve got a side color bond fence with I would like to have it turned into a side gate .. nothing fancy just a latch to hold it on.

- take out existing colorbond fence - install the colorbond fence with new posts at a different location

47m fencing need to be done this week

I am looking to Do Colour bond Fencing come and have a look ?

I have a fence that has to run from the house to the boundary fence between 7 and 8 meters with a swing gate in the centre in situ with a concrete foundation 500mm deep x 350mm wide

I need a fence parcel letter box installed in my colour bond fence

Retaining wall 30m and Colorbond fencing—73 metres

Install 8 2400high x 1200 wide galvanised mesh sheets to colorbond fence. Job is ready to go. Easy access i got clips & surfmist screw fixing. i can give a hand with the install as well. colorbond fence is 1800 high.

Supply and Install surf mist colorbond fence panels between block pillars on retaining wall as per below gap sizes Hole 1 (Left): 1530 h Top-1235 Middle-1235 Bottom-1235 Hole 2 Middle): 1520 h Top: 1180 Middle: 1180 Bottom: 1180 Hole 3 (Right): 1530 h Top: 1445 Middle: 1445 Bottom: 1440

One of the colorbond fence panel flew off during cyclone Alfred. Fence panel needs to be reattached. I do not own a ladder

Need the fence removed and new fence built, hopefully in one day as the fence divides 2 units. The colour bond has to match the other fences in the complex in colour and style.

Remove colour bond fence and stack neatly Fence is to remain on site stacked neatly You will need a ladder and a battery drill/driver to remove screws

Supply and install new Colourbond fencing, approximately 1800mm high. Colour: Surfmist (posts and rails also Surfmist). Include timber sleeper (200x50mm) at the base. Complete removal and disposal of the existing damaged fence (partially broken due to recent cyclone - photo attached for reference). Site clean-up after completion. We have received a quote of $4500 for this work (including $500 for rubbish removal). The contractor who provided is busy and cannot make it in the next few weeks and hence reaching out to Air Tasker. Please provide your best quote. Thanks for your consideration.

Unfortunately the cyclone has uncovered some dodgy work from a fence/gate install I had done recently. The business that did it has disconnected their phone. I would like to have my mailbox installed correctly and my fence put back together.

My side access wooden fence broke, so need another small fence/blockage to the side access. Preferable aluminium or colorbond

Fence fell down during cyclone due to loose post. Have old panels. Just need post to be secured and replace panels, which I have

Hinge on side of the colorbond fence at the front of the property needs to be replaced.