Find experienced local fencing contractors in Nundah

We need a gate to block off access to the back of our building. The gate will essentially be 101cm X 145cm however need a solution please for the higher ledge as well, so people can't bypass the gate. See photo for context. Width: 101cm (965cm on the higher width) Height: 145cm

Replace an existing boundary fence, good access due to vacant lot next door. Timber paling (with no gaps), 9m x 1200mm, will sit on an existing small retaining wall. Price to include material, labour and removal/dumping of old fence. No painting is required.

Replace an existing boundary fence, good access due to vacant lot next door. Timber paling (with no gaps), 9m x 1200mm, will sit on an existing small retaining wall. Price to include material, labour and removal/dumping of old fence. No painting is required.

We had to open up three sections of our chain link fence to get an excavator into the backyard. We’re now looking for someone to roll the section back, and connect the fence back up.

Replace an existing boundary fence, good access due to vacant lot next door. Timber (no gaps), 9m x 1200mm, will sit on an existing small retaining wall.

I need someone to please come assess my wooden front gate. There appears to be wood rot.

I have bought a Vevor three panel fence that needs to be set up and placed in my garden inside the retaining wall. I have attached a photo of the garden and retaining wall and please note it is soft soil so it will be easy to place the pegs in. Each panel is 50” by 50” and there are three. I would like them placed in one straight line to create a privacy wall. Easy installation - see photos attached. Need done preferably today or tomorrow.

Filling the cracks in the fence's surface to create a smooth, finished appearance before painting.There are 6 posts.

Was going to paint it need to have a new one for sales Need you to measure up get the fence and remove and install new one I am not sure of cost so will do initial price.

Finish fence 42m lapped with capping to match new left fence onto back of existing right fence also 2m area where we have no fence photo attached

Hinge on side of the colorbond fence at the front of the property needs to be replaced.

I need the fence and foundation (approx 7meters total) demolished and removed from the site on Friday 10th Jan or Saturday 11th Jan. bricks and foundation demolished and all waste removed from site.

I need a galvanised steel square tubed fence frame 3600x1750mm. Steel square should be 25 x 35-40mm. This will be used to attach palings for a replacement sliding front gate. Diagram attached.

Looking for a quote to build a 30 metre long fence. The quote should include: - Removal of existing fence - Materials - Labour Additional details: - Fence is on a slight incline - Would like a 1.8M high pine timber fence - Would like it to be rectangular picket style - Treated wood, no painting required.

Require a section of timber fence approx. 3m wide consisting of 1 x paling panel & 1 x gate re-installed with a new post following pool excavation. Cost to include supply of new timber post, all other materials can be re-used.

Re-install a section of fencing following backyard excavation work. Approx 3m wide consisting of 1 x paling section & 1 x gate. Will require 1 new timber post (please include supply of this) however everything else can be re-used.

Small peppertown ninja playground construction and install. Ninja 8j Full instructions available 4 holes dug and concreted in 600mm. Need 2 bags per post. Concrete will be supplied

1. The mattress has collapsed onto the bed frame. I need to find out if it can be repaired or not. 2. I want some palings to be attached to a small new fence and gate. A circular saw will be needed to cut around the latch.

Fence is sagging / leaning into my neighbours side and needs straightening, maybe rotten stump, or soft soil. The fence itself is also a little weird as its normal fence neighbour side and spraycreted panels our side (prior owner not me).

Revised Spec: Add 70 timber palings to existing fence, 7 metres long, to raise its height by about 60cm. 1200 mm palings supplied. Add 7 metres of new treated pine top rail (75mm width) - to be supplied by tasker. - Due date: Needs to be done on Saturday, 10 February 2024