Find experienced local fencing contractors in Banyo

There are a few things we need done, would suit a landscaper or carpenter. 1. Our boundary fence is also now part of our pool fence, so needs to have 1.8m palings attached to the existing fence on our side to make sure it's the right height and remove the horizontal posts. It's approximately 11m long. The current fence is a bit wobbly so a couple of the posts might need reinforcement. 2. We also have side access straight into the pool and would like to put a wooden gate and then whatever fencing is required for the rest of the area. The gate needs to be "self closing" to pass pool compliance. (photo with hot water system which will need to be worked around) 3. The louvre window in the pool area is also not compliant so rather than a security screen we were hoping to add horizontal wooden boards to semi blend it into the house wall, with some space between for ventilation through the window. 4. The part of the wall next to the louvre window has been replaced after a ball was kicked through it but not finished properly with edging 5. We require a box built for our pool pump area, around the whole small slab. (Example image attached as well as image of current area) This will need a lid and a door to access all areas. Happy for this to be built with pine. Budget added is just a guide price for a cash per hour job. Happy to negotiate overall price or materials plus hourly rate etc.

I have 4 fence post that are rotten at the base and need repair. Either replacement or a splur/anchor

Looking for an experienced contractor to repair an existing timber boundary fence (approx. 41 metres) at my property in Banyo. Scope of Work: • Inspect full length of fence (~41m) • Repair and straighten leaning sections • Replace damaged rails & posts as required • Reinforce weak sections to improve stability • Ensure fence is straight, secure, and structurally sound Site Details: • Location: Banyo, QLD • Standard timber boundary fence • access along fence line (top of retaining wall) • No height increase required (repair only, not full replacement) Requirements: • Experience with timber fencing • Own tools and equipment • Must include removal/disposal of damaged materials • Work to be completed to a good standard (straight and durable) Quote Requirements: • Fixed total price (no hourly rates) • Break down cost: labour + materials (preferred) • Availability and timeframe

I’m looking to move the cream colour bond fence in our backyard back by 20cm. Hoping to reuse current fencing as much as possible. We’d also like to install some concrete sleepers to 70cm high so we can place a raised garden bed on our side of the fence later on. It’s 20m across. Ideally works completed in the next month or two. Also looking for quote for new fence 1.8m semi-privacy pvc fence on single concrete sleeper at front of property with an entry arbor - in June/July.

I need someone to help pass me and hold 1.8m pine fence palings while I nail them in with a coil gun. Will need a hand to lift the air compressor. The fence frame has been built it’s just the palings left. There’s 21m of palings in a straight line (one side of fence) and the jobs in Banyo. It’s easy access to access and on a level block. Im estimating it’s about 4-5 hours work. I’m hoping to do this Monday (around 9.30am) assuming the rain goes away this weekend.

Old chain fence which I will remove myself in the backyard. Wanting a 1.8m color bond fence which I can supply the fence materials. Left side 6.8m, back rear is 10m. I can also help with the job. Preferably cashie done in a day, im after labour trade fencing skill and you supply the tooling. The budget I have applied is based on cash day work. Happy to negotiate within reason.

Replace 3 posts to colourbond fence . They have snapped off .

Looking for supply and installation of colour bond fencing around 9m and 1.8 m high and also side gate around 1.7 m wide and 1.8 m high. There is no old fence and good to go . Looking for as soon as possible to done Banyo

Timber fence for battle axe block needs tlc - a number of pailings need replaced and the whole thing needs to be reshot with nails.

install 8x stakes into ground next to fence. attach stakes to posts (with bolts) and rails (with screws) fence sagging and required to hold upright. supply stakes & hardware 50 x 50 x 1800mm Hardwood 8x sections in total

Install Railway Sleeper Under Colorbond Fence to Puppy-Proof Backyard Task Description: We need a railway sleeper (or similar solid timber/treated pine) installed along the bottom of our Colorbond steel fence to prevent our puppy from escaping. The gap underneath the fence currently allows room for digging or slipping through, so the goal is to create a secure barrier along one side of the fence line (approx. estimated length 2-3m). Details: • Fence type: Colorbond steel • Task: Excavate shallow trench (if required), place and secure railway sleeper flush along the base • We’re happy to purchase the sleeper ahead of time, or you can supply and include it in your quote • Access: Easy side access to the fence • Preferred completion date: ASAP Outcome: A neat and secure install that ensures no gaps are left for our dog to dig or escape under the fence. Please bring: • Tools to cut, dig, and secure sleeper in place • Experience in similar fencing/landscaping tasks preferred

Supply and install colourbond fence in Banyo. Colour: monument Height: 2.1 Length: 17 metres Flat area, straight line.

Hi I am looking for two instal this two post on a ground and put the Hinges. (The post a from a 'COLORBOND" double gate door. An have to be instal exactly some side of the gate. I am located at Banyo.

drill mini holes and put 30 timber panels.

Need a pvc fence approximately 37 m plus 2 sliding gates approximately 3.5 m each

Supply and install materials to extend this colourbond fence to the aluminium gate. Offer to include supply and install of materials And straightening upbofbhe aluminium gate post. Length of colorbond fence required is 7m

Two sections need replacing colorbond, left overs can be left behind

2 fence posts already removed from holes. 100x100 hardwood posts, 2.8m long Must take all rubbish which isn't much after you take the posts out of the equation Posts not installed to previous clients preferences. No time to come get them

Looking for someone who can build a driveway picket fence/gate that opens. the span is about 4m, and also fix the side picket fence. Also need to put in some timber on a landing. Obviously budget to be negotiated

Electrician to connect power from house to pool filtration area. Return on fence installation day to earth the pool fence. - Due date: Flexible