Find experienced local fencing contractors in Belconnen

I want to relocate the gate from the back of the carport to the front of it.

My small garden has a wooden fence and several of the planks are falling off. I reckon I need less than 1 hour of a handyman's time to nail the planks back where they should be. Have received a quote for a colorbond replacement but WOW that's expensive! So looking for a cheap quick fix.

We would like someone to install 2 timber sleepers at the base of a colourbond fence to prevent our dog escaping. Length approx 180cm x 2. Will need to be cut to fit We will purchase materials, but will need you to collect from Bunnings with ute or trailer

Pretty simple job I imagine. Just need 2-3 cat steps made and attached to one side of an outdoor wooden fence. I’ve included pa picture below of the fence and another picture of what I imagine them to look like. Might need a third step close to the top as our fence is spiked. Also replace missing fence pail.

The back (brick) fence which borders reserve is too low to keep in our dog. The fence, and also the gate will need some type of extension installed to make them higher. The wall is 6m 40cm long, and the gateway is 94cm wide. I’m open to suggestions about what materials to use and will provide all materials. Not sure about how long the job will take, so also negotiable on price to pay for your labour - but prefer quotes for firm price rather than hourly.

Nail clipping for two greyhounds

We need the parameter secured so the dog does not go onto the road parts of it. Need a fence a gate in certain areas and other bits to be patched up. See photos for details.

Star pickets to be hammered into ground and dog proof wire attached to them. - Due date: Flexible

We need a fence constructed in our back yard to keep our chickens safe from our dog and foxes. We have some fence posts and wire already. More may need to be ordered. - Due date: Flexible

PLEASE FEEL FREE TO MAKE OFFERS - Not sure what the usual cost is and looking to compare multiple quotes. Hi, I would like to instal Colourbond fencing in my back yard in the Paperbark colour. There are 2 fences to replace and they are approx 5 metres long. So *roughly* 10m in total (I still need to measure). You would need to supply and transport all materials and equipment here. I need to get approval from strata first so this job wouldn’t be happening right away, but I’m very flexible with times so could work out a day that suits you. It needs to be done very well and solid enough for keeping pets inside, so please only make offers if you have done this type of job before. Thanks in advance

My colourbond gate needs repair/ replacement. It has cracked along welds, dropped and warped. I think that maybe a pedestrian gate might stop this happening again.

I need to get one side of my back yard done

Our gates (front and back) are out of alignment. It is very difficult to open and close them. (See pics)

1.Height extension 60cm to an existing 3 panel colorbond fence. 2. 15cm width x 60cm height to fix to a brick wall to close the space 3. Flashing the meeting point where to existing colorbond fence meet. The photos are for job 2 and 3. Budget for all-inclusive. $700

Hi everyone, Looking for a reliable fencer in Canberra region to install approximately 31 metres of Colorbond fence in Jasper colour. Height: 1.8m Base: Treated pine sleepers at the bottom. Style: Standard Colorbond panels Access: Easy – vacant block on one side, so no tight gates or obstacles. Timeline: Flexible, but ideally in the next two weeks. Budget: Around $4,000–$4,300 (based on similar quotes – happy to discuss). Please quote for: Full material supply + installation. Drop photos of your recent work if you have them! Looking for solid reviews and value. Thanks heaps – excited to get this sorted! Andrew

Paint 5 panels of Colorbond Fence (Monument).

Needing pool grouted around new pool. Then 20lm of colourbond fencing. Install only. The fencing is onsite and site is ready to go.

I have a colourbond fence where a couple of panels in one section have come loose. One has come out entirely. I would like the panels put back in securely

Our dog has dented one of the fence and panels (colourbond) and we just need the sheet cut to size and inserted. Easy job, all that needs to be done is the cap taken off and sheets swapped. Price is quite firm (maybe slight negotiation) as we can do the job ourselves, and have done it previously with no issues. Shouldn’t take much more than 30 minutes - we just can’t be bothered :)

The job need to be dine at Taylor. Some modification need to be done in existing fence.

Someone to install 18m of colourbond fencing. Will have supplies area is mostly flat, maybe slight angle 1.8m high fence

2.4 meter timber sleepers treated pine to be installed on the bottom of my colour bond fence. 10 fence panels. So 10 timber sleepers/ treated pine. Fence is already installed. Tasker to provide treated pine sleepers. There is no sleepers underneath the bottom of the fence that has been installed.

Our builders erected a colour bond fence on top of a cinderblock retaining wall. The bolts have ripped out of the retaining wall due to winds against the fence and the mortar cracking. Need the bolts replaced plus a way to secure in the mortar of the cinderblock to hold the post mount.

Colorbond fence to be installed. About 60m

One part of my colourbond fence needs repair/ replacing - Due date: Flexible

3m x 1800h Single Colorbond gate with panel PLUS 27.7 m x 1800h boundary fence - Due date: Flexible

Dogs have pushed through metal sheets causing it to bend. We need someone to bolt them together so it is sturdier. - Due date: Flexible