Find a fence installation professional in North West Perth

Replace pool gate lock - not automatically latching

Install 1800mm high aluminium slat gate (monument colour) into side opening of house. Opening width is 1760mm. Will need posts concreting in as one side is weatherboard the other side is fence. Either 1m wide gate + infill or full sized gate, whichever is cheaper. Happy to accept either supply+install quote or labour only if advised what to order.

Install Colorbond fencing. Approx 6mtrs by 1.8 and taper down after the garage. As per pic Approx 24m by 2 2m high from the back wall to the garrage. Ground is soft sand as per pics.

I need a plinth fitted to the bottom of my colourbond garden fence. It’s around 2.5m long and I have already bought the plinth so I only need it to be installed. The fence will have to be lifted in order to fit it underneath and there is an artificial hedge attached to the fence (see picture).

The front wooden gate has been broken where the closing latch is. We need the gate either repaired or replaced. Getting it replace is probably the better option. The gate would also need a new closing latch and or lock. It might need some extra wood on the side to close up any gaps.

1 stirrup footing and post needing to be replaced and possibly a second post? A quote on replacing some polycarbonate sheets would be welcome too.

3-4 fencing panels were broken in recent storms. I don't know if it Hardy or Colourbond fencing. Therefore new panels are required and their installation.

Could i pls get a quote for a bball ring installation with conc foundation

The top panel fell off and needs fixing. Might also need wood replacement in the same color shade. Please check if the entire wood fencing would needs to be replace. If it can stay as is then just fix, if not please quote for the whole job.

Install frameless batten fence panels on top of rendered brick wall - 27 metres. I have 20x1.405 m panels, 122x10mm threads, 122 nuts, 8x 280ml chemical anchor tubes. 17x of the panels can be installed without cutting. There are 2 corners that will need to be cut and the two ends will need to be cut to size. Installer will need experience and all the equipment for drilling (wall and panel base) and cutting panel base.

Need gate bought with all extras and installed

To source and install 4 x 2.4m hardifence panels

***please quote*** We supply you install approx 8 metres of colour bond fence

I would like to install temporary fence about 5 meter at Alkimos

I need 2 x identical garden gates installed in my front courtyard. They are 1800mm high x 900mm wide & the wall openings are 1000mm wide, so will need timber to fill gaps (you to source & supply). I already have the hardware (hinges & latches), which also need to be installed. Require proof you've done this sort of thing before.

Bought a gate latch from bunnings. Just need to replace an existing broken one.

Installation of a swing gate and infill panels to a driveway

Remove 4m of asbestos fencing. Replace with 4m of colour bond fence @ 2m height

Hi there I need someone who can supply and install standard single colourbond side gate, ideally before end of this month. Gate size approximately. 870x1800 (fabricated to size on site) + posts + caps Included as standard: I also need D&D lock latch deluxe (WAS), TruClose hinges. Thanks!

Need 1 downpipe installed and sheet of hardiflex eave