Find a fence installation professional in Marrickville South

Replace three cement sheets with blueboards - around 3m high *3.5m long It is very close to fence, so it is a bit hard. Three 3m*1.2m blueboards should do the work. Thank you!

We want to improve the privacy in our home by installing some trellises to our colorbond fence - probably 3-4. It would need to be mounted on something from the ground or attached to our side of the fence. I have marked in red the height which the trellis needs to sit to block the view from our neighbours. It needs to be reversible in case the fence is replaced at a later stage; not sure the best way to do this but open to suggestions. Please see our other jobs listed as they can hopefully be all done together!

Please provide quote for supply and install colorbond fence 8 m long

Fence has fallen over onto a public Park, needs to re-install and removed from the park as soon as possible

Replace pool gate lock in back garden

Repair front wooden picket fence and gates.

Remove ad place new timber

Scope as below: -Supply and install new Colorbond fencing on side(10m)and the back(3m) -Supply and install a new Colorbond sliding gate(non-automated) (3m) -Demo,remove and dump existing timber fence at the back(only) Colorbond fence and gate must be standard sheet, 2.1m high, Shale Grey color Posts will be grouted at side and bolted to kerb at thr back Tree stump will be removed before this work starts - Due date: Before Sunday, 21 January 2024

Our colourbond lattice fence needs a gate installed. A post will need to be drilled into the tile of the patio. Please advise if a gate needs to be purchased of if one can be made from the existing fencing. - Due date: Flexible

We have purchased a new side gate, and need it installed. Posts are existing in the spot, but need to be removed and replaced (to the appropriate width to make the new gate fit) as they’re rotting. Must supply, posts, hinges, latch, and all tools needed to get the job done. I will stain and oil gate and posts. Gate hole (from wall to fence) is 1180cm width. New gate is 90cm width. Old gate was 1m width fyi. - Due date: Flexible

We need a wooden slat fence installed to sit in front of an existing colorbond fence - there is currently a bamboo screen that needs to be removed (it's tied on. Photo 1 is our fence on the other side - this is what we're wanting with a 0.5cm gap in-between the slats. Details are: - Treated slats, but not stained - Dimensions (approx) 10m in length - We need a bit of space in-between planks - approx 0.5cm - There will be two heights of screening: * 1st section 2.1 high from ground (this section will sit in a garden bed - see photos - so you will need to allow for longer timber to anchor to bottom of bed, approx 0.6m) * 2nd section 2.1M high, to sit on a level concrete path Please quote for all materials and installation. Thank you. - Due date: Before Thursday, 29 September 2022