Find a fence installation professional in Ashfield NSW

On the front fence, repair brick pillar (photo 1), attach driveway gates (2 gates each 119cm W x 92cm H made of cast iron) and attach path gate (1 gate 86cm W x 92cm made of cast iron) The date for the task can be 9 ,10 or 11 September

Front picket fence and garden gate rebuild/renovation We’re looking for experienced and reliable tradespeople to quote and complete a rebuild/renovation/replacement of our front fence. Details: Current fence is approximately 6 metres long We’d like to keep the picket style, but it needs to be partially rebuilt and renovated. The palings are fine but the 6 posts and gate will need to be replaced. We would also like it to be straightened out - ie without the indent as pictured The overall finished fence should be repainted in white so your quote MUST include painting. We would prefer to salvage as much as possible of the existing palings unless there is a good reason not to. Note: tiling will be removed before this job starts so no need to worry about drilling through tile, etc Clean, professional finish is important – we want the front of the property to look neat and inviting. Timing: Flexible but ideally within the next few weeks If this sounds like something you can help with, please get in touch with your availability.

I would like to install a classic metal garden fence for our front garden. Length is approximately 6m and a straight line so is not a very complicated job. Will include supply of new fencing and gate as well as installation thereof. If necessary we can source our own fencing but just need to be pointed in the right direction.

I need a new fence replaced similar to the one in the photo. Total length is 33m, height is 1.8m with removal of old fence.

Build a new wooden gate for front of house. Call to discuss - Due date: Flexible

Parts of the fence are starting to lean more and also rot out at the bottom. New sleepers probably need to be added to areas where timber has rotted from other side of built up soil. Fence is 42m ish long and 1.8m high. Part of it encloses a pool so will need to meet height standards. - Due date: Before Monday, 24 July 2023

Remove old replace with new pool fence - Due date: Before Thursday, 22 December 2022

Replace wood fence (7m x 1.8m). - Due date: Flexible

A gate to a pool will not self-close and needs the latch placed higher and gap at bottom reduced. Either fix the non-compliances or install a new gate. - Due date: Before Friday, 4 November 2022

I need to install side fence for right side of the house and a gate and fence at the front of the house - Due date: Flexible

We need an old fence in our rear lane removed and a new one build. We would like it to be a timber fence that is lapped and capped. As part of the fence we will need a hinged driveway gate of the same height, and a pedestrian gate of the same height. The fence line is approximately 11m long. - Due date: Before Thursday, 28 July 2022

We need help installing a low iron gate (we have got the gate, see picture) to a low brick fence. Please quote installation including necessary hinges, bolts. Gate is about 10kgs, with the diameter around 3cm on the side for the hinges. Many thanks! - Due date: Flexible

You’ll need to measure, purchase and install the gates. Attached are the two existing gates, and an example of the types of gates that we would like to replace with.

old picket fence heritage gate to be replaced - Due date: Flexible

need to replace old picket gate. - Due date: Flexible

picket fence gate to be replaced. - Due date: Flexible

Installation of 2 x gate locks on original colorbond fence - side gate & driveway gates. Removal of old hardware on gates. Realigning of fence to aide easy open & shut of gates with locks. Owner provides locks for installation - Due date: Before Monday, 28th Feb 2022

I need a carpenter or handyman to attach a pre-made wooden gate (from Bunnings) and make a small wooden fence for a driveway. Width of the driveway is 2.25m, gate width is 0.9m.

Replace entire wooden side fence (one side only) with same hardwood as current.

The job is to remove our old side gate and replace it with a new one. We don't mind which material is used (wood/aluminium/steel). The width is 1685 and the height needs to be around 1800.