Find a local electronics repairer in Melbourne Eastern Suburbs

1. Table assembly (upstairs lab) 2 electric sit-stand desks: dual-leg motorised frame with control panel and cable tray 2 heavy-duty steel workbenches: galvanised top, lower shelf and levelling feet  All tables are flat-packed and already in the lab. Assemble per the instructions, fit the motor and control panel and check the desks raise and lower correctly, level the workbenches, position the tables and collect packaging into one spot. 2. Safe installation (downstairs storage room) Heavy steel commercial safe with digital keypad, already on site Mount it on to the concrete wall at floor level at the location in the photo. Secure through the back with the 4 supplied hex-head concrete screw anchors Check it’s level and the door opens and closes properly Please be aware, the safe is very heavy. Please take care: The lab has a new fit-out, so protect floors, walls and furniture. Use the packaging or provided moving pads, carry rather than drag, and take care in the lift and around doorways. Desk tops scratch easily, so lay them face-down on a soft surface. Report any damage straight away. Please bring: drill/driver, hammer drill with masonry bits to suit the anchors, socket set or impact driver, spirit level, platform or lifting aid for the safe, Allen keys and basic tools. Location: Surrey Hills. Tables upstairs (lift available), safe downstairs. When: Business hours, Mon-Fri 8am-6pm Taskers required: 2 Budget: $400 total Experience with office furniture or safe installation is a plus. Please mention it in your offer.

Cut down & remove Yakkas & grind down stumps

One wall of an existing planter box has collapsed and requires reconstruction. The wall is approximately 3 metres long x 1 metre high. Scope includes: Remove collapsed bricks and loose masonry. Dispose of demolition debris. Rebuild one brick planter wall only. Render the rebuilt wall to match the existing finish as closely as possible. Clean the work area after completion. No gardening or landscaping is required. Please include labour, materials, disposal and rendering in your offer. Please also check the existing footing/base and advise if any additional repair is required before rebuilding.

Need a plaster to patch the damaged plaster board which is on tile. Just plastering is needed.

Concreting Work Required – Battery Installation Base Prepare a flat and level concrete pad along the external brick wall at the location shown in the photo. This concrete base will be used for a battery installation. Required dimensions: Length along wall: 900 mm Projection from wall: 500 mm Concrete pad size: 900 mm × 500 mm Scope of work: The area is currently stepped/staircase-style, so it needs to be prepared to create one flat and level platform. Form and pour the concrete to the required 900 mm × 500 mm dimensions. Finished surface must be flat, level and solid, suitable for battery equipment. Finish neatly against the brick wall and surrounding landscaping. Remove excess material and leave the area clean after completion. I have attached the picture of the pavers for reference

Installation of Aluminium Threshold Ramp to kitchen access, Aluminium Threshold Ramp to lounge access, and Enviro Rubber Ramp at bathroom access Installation of Lencare 38mm Stainless Steel hand rail

Install handrail to outdoor steps Requiring someone to provide handrail and install to one side of 4 steps off back deck.

I need a handyman to remove the internal black plastic restriction clips from 6 awning windows so they can open fully. They are standard Whitco chain winders.The job requires unscrewing each unit from the sill, flipping it over, popping out the black restrictor clip from underneath with a flat screwdriver, and screwing the unit back down.Easy job, should take under 30 minutes total. Please bring a Phillips-head and flat-head screwdriver.

I would like to add 1 -2 downpipes for the house as there are none on the front and side facade. I would also like to have a camera drainage inspection for the drains around the house to make sure that there are no breaks/leaks and how the connections work. Also there are a few downpipes and pits that would need to be checked/fixed/adjusted o fau oh fayiv wan foe free ayt cifan chu

Looking for someone experienced in ceramic/enamel basin repairs to repair multiple chips around the bathroom basin, as shown in the photos. * Chips have accumulated over several years * Improve or redo the existing repairs as needed so they are smooth and professionally finished * Colour-match the repairs as closely as possible * Please provide photos/examples of similar repairs you’ve completed

We have 3 cabinets that are too heavy to move up stairs. We need them taken apart and put back together upstairs. You don’t need to dissemble the whole thing, just enough to lift up stairs. I will help lift upstairs. They are sturdy, not ikea.

Caulking Approx 30 linear metres between brick wall & driveway - see pictures Job to be completed this Thursday 24th You need to supply caulking material

We have a floating timber floor installed approx. 4-5 years ago. We have a few locations where gaps have opened up, mostly end to end or where boards go under skirting. There is one location where we have a gap along the long edge. Photo of one location provided. 4-5 locations total. We would like these gaps closed up and hopefully ‘glued’ to prevent reopening.

Removal of 5 tree stumps needed- trees have already been cut down. They are very small- range from 5-15cm each. Disposal of the stumps once removed also needed.

Fitment of new OCAM Heavy Duty Steel Side Steps (SS2-TV-REVO) to 2024 Toyota Hilux Rogue

Swap two taps over pls.

I need a couple of tap sets changed over. See the photos. Will purchase the taps and anything else required.

5 bricks have come loose and need to be fixed with mortar. Mortar and tools provided. If have own new materials would be better.

Run two cables through the wall (probably different routes) from home entertainment system to rear speaker

Hi, I need a quick fix on a small set of outdoor timber steps. A couple of the stair treads have come loose and shifted slightly, and looks like it may just need re-securing or replacing. The structure itself seems fine—no major damage—just some wear and tear from weather exposure. Scope of work should be straightforward: * Re-secure loose or sagging steps (likely just needs screws/nails tightened or replaced) * Check underlying supports for stability * Replace any broken boards if needed (happy to cover material cost) * General tidy-up to make the steps safe and solid again Overall, it looks like a simple repair job—nothing structural, just bringing the steps back to a safe and sturdy condition. Should be a quick job for someone experienced.