Find trusted local electricians in Yangebup

Install outdoor gpo for pump for fish pond, directly near meter box. See pic

Looking for a licensed electrician to diagnose and repair an electrical fault in our home. A circuit supplying several ceiling lights and exhaust fans is repeatedly tripping the safety switch, and the issue has become more frequent recently. The fault can occur when turning on any light on the circuit, with no obvious pattern. Sometimes the lights stay on for a period before the safety switch trips unexpectedly. We would like the cause identified and repaired olease

• Recent wall removal/renovation completed, including electrical work. • Lighting issues started immediately after works were completed. • Only the lighting circuit is affected. Rest of house power is fine. • Safety switch/RCD keeps tripping. • Tripping happens immediately when certain light switches are turned on. • Fault is inconsistent. Not always the same switch causing the trip. • Can usually only run 1-2 lights at a time before power trips. • No burning smell, sparking, or flickering noticed. • Lights are currently mostly unusable. • Electrician has advised they do not believe the issue is related to their work. • Looking for fault investigation and cause of lighting circuit tripping after renovation works

Hey, looking for a licensed electrician to move a light switch and a fan switch onto an adjacent wall. Current setup: • Wall 1: 1 light switch (with dimmer) + 1 fan switch • Wall 2: 5 light switches + 1 dimmer I want the switches from Wall 1 moved onto Wall 2 so everything is in one spot. Total after move: • 6 light switches (2 with dimmers) • 1 fan switch Important: • The wall the switches are being moved from is being demolished, so no patching required - just disconnect and relocate • I’m not sure whether to go with an 8-gang plate or 2 x 4-gang plates, so I’d appreciate advice on the best option • Not sure if I should supply switches/dimmers or if you prefer to supply - happy either way Timing: • Needs to be completed before May 12 Let me know availability and what you’d recommend. Cheers

I’ve purchased a pool heater and now need someone qualified who can assist with the following: - Installing 2–3 power points near the pool equipment so the chlorinator can be mounted on the wall properly and the wiring can be cleaned up. (The meter box is only 2–3 meters to the right of the equipment, outside the house, if that helps.) - Wiring up the pool heater to the mains or powerpoint - If can carry out the plumbing and piping the pool heater and the existing filtration system, that would be great

Hi, I need a licensed electrician working under an electrical contractor licence to install two ARIA Gx53 CTC DC ceiling fans with lights in two bedrooms. These will replace the existing ceiling light fixtures. Details: • 2.4m ceilings • Existing wiring in place • Fans only came with remotes (no wall switch included) • We were hoping to have a wall light switch, so any advice on whether that’s possible with this model would be appreciated What’s needed: • Remove old ceiling lights • Install both fans and receivers • Make sure everything is wired safely and working properly • Let us know if adding a wall switch is an option • Provide a compliance certificate

Cable from the board to the pool for 25A plug to supply pool heater power

I need a licensed electrician to install a new power supply in the roof of my main bedroom to properly connect a ceiling fan that was recently installed. At the moment, the ceiling fan and downlights are wired together – turning on the fan causes the lights to come on as well, but they flicker and cannot be operated independently. What’s Needed: • Install a new dedicated power supply or circuit for the ceiling fan • Ensure the fan and downlights can be switched on/off separately • Diagnose and resolve the flickering light issue Location: Yangebup Access: Easy roof access via manhole Preferred Timing: Any Afternoon, 1pm onwards. Please bring necessary tools and materials. Must be a licensed and insured electrician.

An electrician to fix my sun bed

Around 5-6 Downlights (Supplied). 4 Dimmers 1 Pendent Light 3 Ceiling Lights. Single Storied Double Brick Brand new House.

I have a new electric oven that needs to be installed. And then one light fitting that needs to be replaced and I would like to change three power points from singles to 4 point ones if possible.

Remove old split system air con and install new unit

I need 10 downlights installed at my house plus 1 GPO fitted house is single story double brick ill supply downlights

Supply and install same in bathroom. Discuss option for light with exhaust as alternative cheaper option not needing heating option necessarily

Dog ate my remote control for ceiling light/fan. I have a replacement kit. Also I have a dodgy ceiling light in another room which needs repair

- Require new power points installed for dishwasher, oven and gas cooktop spark (There's already a 15A socket on the same wall as the oven if that makes any difference) and power points for under-cabinet lights. - Replacement of existing light in laundry

I have around 14 transformers to change for downlights, 2 PowerPoint's and 1 exterior sensor spot light.

I need a new downlight altered and connected to existing hardwiring

We need power point and clear pathways for internal wiring to install fibre optic internet, advise me about the cost,I have no idea how much it would be,also it is a double storey house

Power tripped last night partially for the house. Many switches not working downstairs. Upstairs most switches working fine. Need it done urgently on Monday 11th march. Licensed electricans only please.