Find experienced deck builders in Outer West Sydney

Merbau 2500 x 1500 size deck. 1000mm high over a concrete slab. 5400mm long Timber wire balustrade. Easy location to build around. Dont need to allow for staining

I have a covered outdoor deck with a gutter that is leaking in multiple areas. Leaks are happening: * At the corner joints * Along sections of the gutter during heavy rain I need someone experienced to * Inspect deck gutter (joints, seams, possible overflow issues) * Reseal all leaking joints and any sections along the gutter * Check fall/slope and water flow to ensure it drains properly * Make sure it holds up during heavy rain I need a proper long term fix, not a temporary patch.

Want deck sanded back to remove stains

I have a covered outdoor deck with a gutter that is leaking in multiple areas. Leaks are happening: * At the corner joints * Along sections of the gutter during heavy rain I need someone experienced to * Clean out the gutter (remove debris, dirt, buildup) * Inspect entire gutter system of the deck(joints, seams, possible overflow issues) * Reseal all leaking joints and any sections along the gutter * Check fall/slope and water flow to ensure it drains properly * Make sure it holds up during heavy rain I need a proper long term fix, not a temporary patch.

Throw me your offers to install a 30sqm WPC deck I supply all screws, brackets and WPC DECKING 9m x 3.3m

Reseal deck. I have the deck stain. Approximately 25 sqm

ORIGINAL BOOKING CAME AND NEVER RETURNED SO NOW STARTING QUOTES ALL OVER AGAIN Building a composite deck myself but after someone to do the base

Three small lasterlite panels deck roof to be replaced due to hail damage. I have a full sheet of the materials which should cover the job

looking for the reasonable quotes for installing double carport and deck roof changing

To supply paint and labour for washing, painting and seal any gaps on the cladding to the property (3 sides - see photos). To also oil the timber deck as well (see photo).

Sand and stain deck, move furniture, you provide sander, I provide sealant/stain

Remove items of furniture from deck (2 x lounges, dining table, cabinets, fridge, barbecue) Lightly sand deck Apply 2 coats of stain/sealant (to be provided) Area circa 9m x 5m

I have a timber deck that needs some repairs. A number of the deck boards have come loose as the screws are no longer holding properly at the joining sections. I suspect the underlying support structure may not have been built with treated timber, which could be causing the issue. The job will involve: Securing the loose deck boards Replacing a couple of the support beams underneath with treated timber Looking for someone experienced in deck repairs who can assess and fix the issue properly.

Construct a heavy-duty timber sub-frame and decking platform to support an Oregon Spa Pool (~1.8 tonnes wet weight, but structure should be able to support much to be on save side.). Finished Height: Approximately 300mm above natural ground level. Dimensions: Minimum 3m x 2m (Required) / 3m x 3m (Optional). Spa will be 2 x2 meters. Footings: Concrete-set stumps/posts (e.g., 90x90mm H4 treated pine or steel SHS) into the clay/sandy soil. Footing depth and diameter should be rated for a 2,000kg point load. Ground Clearance: Ensure a minimum gap for airflow between the ground and timber to meet Australian standards for termite inspection and rot prevention. Decking Material: Contractor to suggest options: Hardwood: Spotted Gum or Merbau (highly durable, premium look). Composite: Low maintenance, rot-resistant (ideal for the damp/misty Blue Mountains climate). Treated Pine: Most cost-effective, requires staining. Fasteners: as recommended for the longevity of the structure, especially given the constant moisture from the spa. Conduits: Frame must allow for electrical and plumbing lines to be plumbed up through the sub-frame into the spa cabinet. Surface Drainage: Ensure the ground beneath the deck is sloped to prevent water from pooling under the timber structure. Access: Site is accessible by UTE. Sanding and initial oiling/sealing of timber (if using natural wood). Site Cleanup: Removal of all offcuts and construction debris.

Repair steps and stain deck and garden bed top finishes pictured

Take out old car head deck and install new plug and play in WRX STI 2018 must have experience

The supports on a part of the deck need replacing

Clear And Level Ground. Boarder Edges. Install Stringers Stairs And A Pathway Deck Please. Experienced Person Would Be Awesome. Cheers. Jack.

I need a shade sail installed over my deck

Prep, clean and stain 12 x 4m deck, and small paint touch ups around the house.