Find reliable curtain rod installation services in Brunswick VIC

We need a curtain rod installed underneath our bathroom counter - see attached photos. The space where the rod will go is approximately 186cm wide, 5cm deep, and 6.5cm high. I would like for the rod to be on a bracket mounted to the wooden panel under the counter, rather than the wall on either side. Curtains not required - I will get them made up.

I need a curtain rod hung onto a wall that will be roughly 2.6m in length and sitting between a window and aircon unit. The wall is brick and plaster. Link to the curtain rod we have - https://www.templeandwebster.com.au/Contempo-Curtain-Rod-Set-TMPL3229.html Installer will need their own step ladder, tools as well as screws/anchors (we’re not far from bunnings). Thanks!

I'm moving out of my rental and require someone to take out the screws of my current curtain rod brackets and reinstall the landlord's brackets. Should be a quick and easy job, you will need a masonry drill bit as the wall has brick beneath the plaster. There are just 2 brackets. Also may need an additional screw as I'm not 100% sure I have all the originals. It will need to be at 5pm or later tomorrow (Tuesday). Thank you!

Repair curtain rod, with stronger bracket and attachment to dry wall

Hi anyone in Brunswick for close would like to finish putting up this curtain rod? Will be a 10 min job, goes into wood but my drill broke 😂 If you have a couple of shorter screws with you, that would be good. These ones are too long.

Looking for a professional handyman to replace curtain rod brackets with double rod brackets. Wall is plaster.

Drill and attach curtain rod brackets to rendered/painted brick wall. Easily accessible, have everything needed apart from screws and drill. Have provided pictures for reference of second rod I attached with a friends drill on the yellow wall. Brunswick, VIC.

Hi there, I would like someone to please come and install ikea curtain rods on 2 windows. The wall material could be a combo of plaster, wood or metal strapping. Not sure about which wall anchors to use. You would also need to bring your own step ladder with you. As soon as possible would be wonderful. Thanks Kindly!

We tried putting the hooks that hold the curtain rod into the wall but they just keep falling. Can someone properly install them so they don't keep falling and leaving holes in the wall? - Due date: Flexible

I have three curtain rod brackets that need to be mounted on a wall (plaster, I think). I have the brackets and materials but need help with the drilling / installing - Due date: Flexible

Need someone to come drill some screws into my wall for hanging up a curtain rod. Tried it myself but the included wall plug is long enough that I hit brick, and I don't have a masonry drill bit. Thank you! - Due date: Needs to be done on Friday, 5 May 2023

Curtain rod bracket to be installed. Walls are concrete so will require impact drill. - Due date: Flexible

Drill and install a curtain rod in the wall - Due date: Needs to be done on Saturday, 15 April 2023

Curtain rod installation for s-fold curtain type. window is approx. 4 metres wide and 3.5 metres high. Needs to be installed on the wall not ceiling. - Due date: Flexible

I need to hang curtains from approx 4.3m high, room is 4.9m wide. Curtain rod will need to be attached from the ceiling. There is a wall underneath where ladder can lean against. I don’t have the ladder. - Due date: Before Sunday, 13 November 2022

I need two curtain rods put on to double brick walls and a battery operated smoke alarm put on to a normal height ceiling .It can be done anytime after 6 during the week , - Due date: Flexible

We need a curtain rod to hang near the ceiling. To drill either side of the rod into the wall and make sure it is level. We have the brackets and screws. You will need to provide : Ladder Screw driver Spirit level Based on Sydney Rd. - Due date: Before Friday, 22 April 2022

I have two Roman blinds that need removing and two new curtain rods to be installed. Height is approx 3m and width is approx 2.2m.

Just need a couple of brackets installed for 1 curtain rod for a bedroom window. Really simple job should take 5 mins. - Due date: Needs to be done on Saturday, 4th Dec 2021

I have an existing curtain rod that is hung too high. I would like someone to lower the rod about 7cm. There are three brackets. You would need to supply appropriate wall anchors to carry the weight of the rod, curtains (linen) and sheers. I will patch any holes left behind so that is not part of the job.