Find experienced local carpenters in Tullamarine

We need a skilled carpenter or cabinet maker urgently to prepare our kitchen and laundry for stone benchtop installation. Attached are photos were SB is where the stone benchtop is going Job details: • Install substrate/base support and white 2-pack panels (to match existing cabinetry) • Work required in both kitchen and laundry areas • As shown in attached photos • Must be done ASAP (preferably today or tomorrow) Requirements: ✅ Experience with kitchen/laundry cabinetry and benchtop preparation ✅ Attention to detail to match existing 2-pack finish ✅ Must have own tools ✅ Provide panels and materials required Happy to take offers as long as they are fair and reasonable since this is a 1 hour job

My outdoor fuse box cover (hinged at the top) needs to be replaced. Tasks: * Remove old wooden cover * Cut and fit a new timber cover (hinged at the top, same style as existing). * Secure it ensuring it opens/closes properly. No painting required, I can do that myself afterwards.

Sand deck and retain. No replacement of boards required

We have a food cabinet that needs maintenance. The wheels have come off the railing and needs to be fixed.

We have a food cabinet that needs maintenance. The wheels have come off the railing and needs to be fixed.

Floor sanding stain and varnish

I am a qualified Carpenter. I'm looking for someone to help me with small-medium sized jobs. This will just be casual work. You will need your own tools. Scope of works include: - doors - hardware - decks - pagolas - fences - eaves - skirting - architraves - timber framing Etc

Hi there, I am looking for a cabinet maker to build a small linen cupboard approximate measurements are 2.6 m H x 600 w x 400d I’m looking at an install that’s framed up, plastered and finished with skirting and cornice to match the adjacent wall. - Due date: Flexible

I have a Poker Table. Looking to install a Shuffler into the table including a Flush Mount. I have the Instructions from the manufacture: Determine the location on the table by using the template. Make sure there are no obstructions at the bottom of the table such as support beams. As shown on the template, you will cut a hole 9.5” (254mm) long x 7.375” (187mm) wide. 2. Trace X mark inside the template with a marker. 3. Remove template. 4. Cut the felt along the marker. 5. Fold the felt outward and tape it securely to table. 6. Trace along the template with the market. 7. Cut the plywood using a jigsaw or a router. Shorter sides need to be cut in a 45- degree angle from the bottom surface (see illustration). 8. Fold the felt inward and place the faceplate on the table. 9. Position 4 flexible metal straps to the studs with the nuts on the bottom of the faceplate; do not tighten. 10. Bend the flexible metal straps away from the shuffler. 11. Tighten metal straps to table, and then tighten bolts on faceplate. 12. Place the picture hanging loops 1” away from the edge of the plywood in the center. 13. Pull the felt and secure with staples. 14. Tighten nuts to secure the faceplate to the table. 15. Insert bolts through the bottom plate from the bottom and tighten with nuts. 16. Hook the turnbuckles to the brackets. 17. Connect the base to the table with turnbuckles. 18. Place the Shuffler on to the base plate and tighten turnbuckles. I have also attached a few images of the table. Its a standard Poker table that has been reinforced for strength. - Due date: Flexible

We are looking for a cabinet maker to build 5 outdoor kitchen cabinets (should be weather proof) as per dimensions given in image. - Due date: Flexible

Cutting studs/beams basic carpentry - Due date: Needs to be done on Tuesday, 28 March 2023

Wanting draws and shelves made for my walk in wadrobe - Due date: Flexible

—> supply and install external door. Opening area is: 1910 mm H and 855 W —> install architrave for 6 room windows (we have some material) —> install 3 door locks (lock will Be supplied) —> install skirting for 16m area

1. Bathroom architrave - this is a bit more difficult than your standard one as the titles are already in and very small space left 2. Install decking step (wood provided and already cut to length) 3. Install Door handle properly

Working 1 full day possibly 2 building timber door Frames - Due date: Before Friday, 23 December 2022

Home in Tullamarine. Need to stain the staircase. Consists of 6 handrails totalling 6.4 metres and 14 treads. Task is to prepare the surfaces (sanding etc) and stain in different colour stain - darker. Apply non-slip protective coating. Materials to be provide by provider. - Due date: Flexible

Wooden dining table has x 1 small circle Watermark stain from a cup and x 1 big patch from a wet towel left on table. general scratches on table - Due date: Flexible - Due date: Flexible

Looking for a carpenter to blueboard approx 45 sqm area and to do decking approx 25 sqm area.

We have an outdoor deck approx 6m x 5m that needs a light sanding back and a clear varnish on top. We don’t have a sander but happy to buy the varnish or any tools necessary prior. We’re free all this long weekend. - Due date: Before Monday, 14 March 2022