Find experienced local carpenters in Nollamara

I'd like to replace my kitchen cupboards. I need to purchase new ones and would like some advice and someone to take off the old ones and put the new ones in. There's about 14 x 600mm cupboards, 4 x 450 cupboards and 4 smaller ones. There's also 8 x draws. I put in $300 but im open to offers if someone is willing to explain price to me.

Hi. We wish to modify our existing cabinets to mount a dishwasher. On the remaining space on the side we’d like to mount a slide out drawer as per pics. The space is just under 800mm wide and 935mm high to the underside of the bench top. The tasks required are as follows: 1. Remove existing doors etc. 2. Modify cabinets to take a full size dishwasher. 3. Supply and install suitable slide out drawer on one side of the dishwasher recess. We would like a neat and tidy job that is durable and has good quality fit and finish. Please feel free to offer what you believe is reasonable.

Cabinet + benchtop removal Optional: include gas disconnect if you’re licensed, otherwise I’ll book gasfitter separately Ability to provide a short written note/report if the splashback breaks

Kitchen drawer cabinet repair

Oil stain on the paving and a bit in the garage needs removing

I need to replace two bathroom sink cabinets and needs to replace 7 kitchen cabinet doors. I will quote the price including installation

Hi, I would like to know whether it’s possible to modify the existing cabinetry to create space for a 45 cm dishwasher. We’re planning to purchase and install the unit, and would appreciate a quote for the required work to fit it within the current cabinet setup. Thank you for your help.

Unfortunately we sub let our place and they have destroyed our brand new sofa. Need a professional cleaner who is able to get the stains out as seen in photo.

I need a stain removed from carpet. Curry was spilt onto carpet. The carpet is light in colour so may need some chemicals to remove

Need to replace 5 kitchen cabinet doors to replace existing damaged doors. Just needing raw board as I'll paint them. 2 of 397mm w x 694mm h 1 of 296mm w x 694mm h 1 of 596mm w x 340mm h 1 of 597mm w x 1942mm h I have existing doors to help get exact measurements. Thanks!

Front door needs to be sanded down and re-stained inside and out. - Due date: Flexible

Make kitchen cabinets with drawers, overhead cabinets and stone counter top, all to match existing kitchen. No electrical, no plumbing.

Need some overhead laundry cabinets made and installed, to match the under sink cabinets. - Due date: Flexible

I have bought Ikea kitchen cabinets that I need to have configured for installation in 2 corners of the kitchen - Due date: Flexible

I have upholstery stains on a kitchen chair and on sofa stool. Would like them removed

Assemble and install 2 door laundry overhead wall cabinet on a brick wall, Location is Nollamara - Due date: Needs to be done on Wednesday, 29 June 2022

Seeking someone to cut and install thin pieces of wood vertically up the length of an internal wall, with even spacing between each strip of wood. Looking for someone with strong attention to detail, so that the final result is neat and straight. No idea how long this will take, I propose that we agree on an hourly rate or something, happy to discuss. The wood purchased is Porta Tasmanian Oak, 20mm wide and 8mm thick (2.4m length). Looking for a gap of 10mm in between each strip of wood, so that you can see the blue painted wall behind. The surface area covered will be approx. 1.4m wide, so that means approx. 45 strips of wood to be attached to the wall, side by side. Some cutting will be required to make them fit (distance from skirting to cornice is 2.25m) and also to allow a gap for TV wall bracket attached to the wall and for the power outlets. How the strips are attached to the wall I will leave to your professional opinion - my preference is glue to avoid visible nails, but happy to discuss. It is very important to me that the strips of wood are very straight and very evenly spaced, so that the final result looks neat and tidy. Images uploaded as follows: 1. Wood purchased 2. Wall to be attached to 3. Close-up of wall (showing TV bracket and power points) 4. Example of what it could look like once installed (except that the wall will be visible in between wood strips) 5. A rendering in MS Powerpoint showing the strips of wood and gaps needed for TV bracket/power outlets. - Due date: Flexible

We have the materials, however, need a roof carpenter to replace what has fallen under the eaves. See photo. - Due date: Flexible