Find experienced local carpenters in Adelaide Station Arcade

Manufacture 4 cabinets (3 of Design A provided, 1 of Design B provided). These display cabinets will be used to display and sell stock at markets and shopping centres. - Basic designs provided as a starting point. There is scope for you to refine and/or alter these where necessary to fit purpose. - Approx measurements provided. To be refined by you, taking into account practical elements (such as lockable under-counter storage - not illustrated in images provided) - Cabinets are designed to be easily transported by a pallet jack. - General aesthetic visual/design/feel = Horizontal slat-walled wooden cabin. - The exterior of each cabinet will each incorporate a framed inset securable display box/window. Please factor in the window framing shown in the design, and probably a clear acrylic window (no glass). The roof and central back wall of this inset box incorporates into shelving on the interior side. - Designs show individual slats stop 300mm from top, leaving an intentionally larger piece of wood for signage. - Regarding material selection, factors to consider should take into account: overall weight considerations, suitable structural function, durability, safety, aesthetics, and construction material price. - Please include Painting / treatment suitable for maximum outdoor durability. Must be in metro Adelaide. Transportation after construction would be nice, but is not essential.

• Construct new rear fire party walls (60/60/60) with Fyrchek + R3 insulation • Frame varied-height cooking station walls • Frame new & existing doorways • Prepare support framing for ceiling-hung wine cabinet [B]

I am fitting out a small 30sqm commercial kitchen in Adelaide for a fusion dessert & light-meal shop. The kitchen has open flame cooking， so this job is structure-only carpentry, very budget-focused. Scope of work: - Fire-rated partition wall (timber frame + fire-rated plasterboard), to ceiling - Basic non-fire-zone carpentry only (no work near open flame) - Simple bulkhead / ceiling concealment if required - Basic service window / opening framing (structure only) Important notes: - This is a council-inspected commercial kitchen - Fire-rated materials are required - No custom joinery, no decorative finishes - No stainless steel work required (handled separately) Requirements: - Experience with cafés / takeaway / commercial kitchens preferred - Must have Public Liability Insurance - Please provide photos of similar work if available Location: Adelaide Timing: Flexible, but ready to start soon Budget: Tight / cost-focused

Hi, I’m looking for a skilled carpenter / joiner / cabinet maker to design and build a custom front table / counter for my market stall. I’ve attached a reference image to show the general look and style I’m aiming for (modern, timber and black, clean and professional), but this needs to be purpose-built for real market use rather than decorative furniture. The table needs to be collapsible or modular so it can be packed down and transported easily. It must be lightweight enough to move, but strong and stable enough to comfortably hold a pie warmer and basic service equipment — it cannot be flimsy. Minimum depth required is 50cm. Total length will be approximately 2–3 metres, and I’m open to advice on the best modular layout. It will be freestanding inside a marquee and needs to sit level on uneven ground. Materials would ideally be timber (or timber-look panels) with black structural elements, finished cleanly and professionally for food market use. The front panel should allow for a logo to be added later (likely an acrylic sign). I’m open to modular sections rather than one long piece, and I’ll need space for staff entry/exit at one end. Happy to collaborate on practical improvements — function is just as important as aesthetics. Please include any relevant experience or photos of similar work, a rough price range, estimated build time, and any suggestions you think would improve the design. Thanks, and I look forward to working with the right person.

need a shed cupboard approx. 3.5 meters long 0.75 m. deep and 2.4 m. high with a roller door on the front

Door was broken off need a carpenter to fix

I am looking for someone to help me build a small cabinet with a medium finish. I have attached the plans for your reference. Please let me know if you can assist and provide a quote. - if you will think will cost more be free to give a price

I need a handyman to re-secure some timber shelves at the back of our work van. The shelves have come apart and keep falling off, which is damaging the sides of the van. Looking for someone who can: - Reinforce or re-fix the timber shelves so they’re strong and stable - Supply appropriate screws/brackets if needed - Ensure the shelves are safely secured for driving conditions Tools required: Please bring your own tools. Materials: Supply screws/brackets if needed Budget: $150–$200 (happy to discuss depending on scope).

Joinery - kitchens and robes installation around Adelaide

Wanted: Skilled Carpenter We are looking for an experienced carpenter to design and build a custom cabinet, reception desk, and office furniture. If you have expertise in custom woodwork and quality finishing, we’d love to hear from you.

Need a cop into that. Provide me a quote. This will involve you coming to my address and actually looking at the job and providing an accurate quote. I need to line a shed with a few walls and ceiling.

We're after someone to install some plywood in the roof space of our pitched garage roof so that we can store items (tubs, outdoor equipment etc). Photo has been attached

Repair timber rot to Fascia and exposed wall cavity in the back yard

S/S bentch top supply and install

- Remove the stain from the floorboard and return to original condition - Patch the carpet to original condition

Looking for a carpenter in Adelaide for some tasks, would suit skilled carpenter We have 4 rows of 6 chairs needing to be screwed into to timber( see attached) Installation of of two sets of door handles Installation of door stops within frame

I have a small ensuite in need of even smaller slimline vanity. Must be freestanding and a minimum height of 92cm and length - 60cm. Depth can be discussed but thinner the better. Can have inbuilt sink or sink on top. Open to options of design and materials and happy to go with recommendations. Pictures of past work would be great.

Need wood to be put over a cage wall and then apply panels from bunnings over the wall

I am gonna fit-out my new cafe restaurant. So, need a carpenter to do carpentry job done. It’s a pretty big shop. Contact as soon as possible.

We need 60 of these models to be made out of pine please. They don't need to be painted. All corners and edges need to be radiused. SA based only please. Can be done from home but we need these in SA.