Find experienced local carpenters in Prospect SA

I’m looking for some help woodworking and carrying a heavy plywood desk up the stairs. I'm wanting to have the desk width sawed 85cm narrower (cutting off the back of the legs & tabletop as indicated in images, to remove the uneven edges), potentially refinishing, and then lifting it up a narrow staircase. Technically the desk does fit. With the 85mm removed the final dimensions would be: 750mm H x 2000mm L x 665mm D, and the hallway is 810mm wide from each skirting board (though the handrail may get in the way). I believe if lifted vertically it could make it around those corners, though I’m not 100% sure as my friend and I were too weak to make a good attempt. If it turns out the desk won’t fit, I’d also be open to having both/one of the legs sawed off so that I can reconstruct somehow it situ (for additional $). It’s just a nice chunk of plywood so I want to make it work asap

4 Timbers need to be screwed on the back (each as, just follow the instructions), and 2 vents need to be swapped around on most the inside (3 screws in each vent). All material and screws are there

Looking for an experienced labourer/installer to assist on-site tomorrow, with potential additional work on Saturday if it’s a good fit. be onsite 8 am Must have solid experience with timber/carpentry work and be confident using basic tools on-site. You’ll be assisting with installation work, measuring, fixing, levelling, and general hands-on carpentry-related tasks. Please bring your own tools, including: Ladder — most important Impact driver Drill Drivers/bits Levels General hand tools Must be reliable, punctual, and able to follow instructions from the site lead. Experience with timber/carpentry is essential. Potential for ongoing work for the right person.

This cabinet needs to be rebuilt as it is very shaky and not sturdy enough.

Need to rebuild this cabinet as it is not sturdy and is very shaky.

Please quote for wood rot in post and beam of verandah, also bottom of a garage door. I will have a painter finish the job. Budget flexible as I’m insure of the scope of work. Thank you!

Oil/Stain outdoor furniture as per attached images. Oil will be provided. 2 coats on each.

Alter the cabinet in kitchen to fit new fridge. Width and depth are ok. Just need extra 50mm height clearance by moving the shelf and doors.

Need a carpenter or handyman to screen down boards back into outdoor gazebo and line up some timbers to line up

Supply & install a wooden wall cabinet ( around 1.2m x 0.6m x 0.6m) where the birch wood muse head is, matching the existing one on the right ( top with two doors). Supply & Install a woodgrain wall panel between the top cabinet & the open shoe racks below ( around 1.5mx 1.2m). Supply and install a vertical wood grain panel ( 1.5m x 0.6m) in the centre of the seat as a divider. Left side install a black metal bar for cloth hangers, right side install a few shelves

I am looking for someone who can help me build a servery window and install on a vintage caravan. Please reach out if you can help!

Please quote for your labour and I will pay for materials. I've attached some photos. I thought this door at Bunnings or similar might be a suitable replacement: https://www.bunnings.com.au/woodcraft-2040-x-820-x-40mm-entrance-door-2lite-clear-safety-glass_p1960006

Bench seat put together, please see photos attached of box. Must bring own tools.

I have a oil stain in my private parking i would like to completely remove it

Put white film in a window for privacy .fix large sliding widen door and screen coming off its tracks. Help out up some decorative lights in outdoor area.. help fix trellis to fence.put ipicture hook.

Need to install some drawers and shelves in walk in robe and wardrobes. There are 3 wardrobes and one walk in robe. Supply and install need to by the tasker

Three smallish doors (500x700) to be trimmed to size, hinges added and fitted to a cabinet. Job is low to the ground.

Needing x3 custom wavy shelves exactly like the photo provided. With concealed brackets to attach to wall. Approx 90 length and 25 deep