Find skilled builders in Kew VIC

Install Automated Sliding Driveway Gate Size: 1630mm (H) x 3090mm (W) Style: Batten sliding gate (photos attached) We need a full supply and installation of a new automated sliding gate. There is no existing gate, so everything is required. Job includes: Supply and install gate, battens, track, wheels, posts, guides, stops Supply and install motor + automation (remotes/sensors) Ground prep + concreting as needed All wiring, materials, tools, labour Test and ensure smooth operation Looking for an experienced automated gate installer. Flexible with timing.

Looking for a professional charcoal concrete driveway

I would like to design a pergola / outdoor kitchen with a fixed roof, a back wall, a side wall and a storage cage against the side wall. I would like closable openings at the front and one side.

Demolition of concrete footpath (side of house) 1.2m wide x 3m long x 0.12m deep. Reinforced concrete.

The drive way concrete is a straight finish and we need to keep it that way. Need to realign and cut the blue stones for a smooth connect to the drive way. There are two spares blue stones shown on the picture but more may be needed. Can send more photos if required. The yellow part is just sand a temporary fix.

Driveway gate usually shuts properly but not every time

We need to replace hinges on a steel framed gate & lift higher on timber supporting post. Car backed into gate (nightime) as gate got stuck on ground & didn't fully open. So gate needs to be lifted higher on timber posts & electric gate system to also be moved higher on to post

Gaps movement in a few floor planks. Located abbotsford. Need fixed by Friday. Quotes welcomed. Thanks

We need old small shed taken away and new one assembled and put together where the old one was. I would like this done lunch time today. We will be supplying the shed that is 1260x 795x 670x

Outdoor cleaning. Paths, gates and brush cobwebs off high pergola

Assemble a pergolux S2 3 x3 m aluminium pergola

I have looking to add additional partition wall to an office area of 60 sqm, and need accurate drawing for buildings to put up partition walls and glass partitions. Need a person with architecture drawing skills, and office design/layout will be ideal. There will be sliding doors for the work area.

Install Bunnings shed, Afsco 3 metres by 1.52x 2.08. Install in backyard. I have postponed this job, as we are having additional works at the property. I will repost in the new year

Assembly of small garden easyshed.

repair / replace the main timber beam on our pergola. it would be a 300mm timber joist, which has failed at the connection to the main timber column. it could be a temporary fix that would make this safe for the next 3 - 6 months whilst we work out what we are doing longer term with the pergola.

Build partition in 2 rooms per picture 1. One room with 1 curtain opening. (Wall 1 : 2,490 x to ceiling / Wall 2 : 3,000 x 2,490) 2. One partition wall with 2 curtain openings (4,000 x 2,400) I got the key on the 15th December and prefer someone who can start on the 15th of December. - Due date: Needs to be done on Friday, 15 December 2023

I need a kitchenette built - Due date: Flexible

We have a pergola that has come loose as a result of too much rain catching on a temporary we had installed (has now been taken down). We need help from an airtasker to secure the pergola back in place - someone with basic knowledge of construction, a ladder (we have a ladder but a second ladder is needed to get the job done) and a drill set it what we are looking for. - Due date: Needs to be done on Sunday, 29 October 2023

I would like someone to assemble and install an Absco Shed 2.26m wide x 0.78m deep x 1.95m high. I would also like a suitable concrete base to be laid underneath prior to assembly. Ideally I'd like it done in the next 2-3 weeks. The model I have purchased is linked below. https://www.bunnings.com.au/absco-sheds-2-26-x-0-78-x-1-95m-monument-single-door-space-saver-garden-shed_p0123599

We have a new ABSCO shed that we need assembled. It’s 3m x 0.78m x 1.95m with sliding doors and a skillion roof. It comes with an assembly app - but does require someone with experience. - Due date: Before Sunday, 18 June 2023