Find local bathroom renovation experts in NSW

Need to take all old silicone and apply new seals

Looking for an experienced handyman or bathroom resealer to redo the silicone in my shower. The old silicone has failed and gone black with mould, mainly at the wall/floor corners and along the base of the glass panels. Scope of work Cut out all old silicone around the glass screen panels, wall/floor corners and wall corners Clean and treat the mould, and let the joints dry fully before resealing Apply new mould-resistant sanitary silicone with a clean, neat finish Seal behind the tap flanges where accessible Re-grout any cracked floor grout lines (please quote this separately if needed) Clean up and remove all rubbish Details Small shower with a two-panel glass screen and tiled floor Photos attached showing the problem areas Materials to be supplied by you and included in your price

Around shower floor silicone need to be removed and redone

Remove mouldy shower silicone, thoroughly clean the area, and reseal with new bathroom-grade silicone. Floor area only. Must be completed neatly and professionally. Small shower area

1 x SHOWER refresh required - Shower floor area: approx. 1600 mm × 800 mm -Thoroughly clean and prepare all surfaces before application -Remove old, discoloured, mouldy silicone where required and apply new mould-resistant, watertight, bathroom-grade silicone -Leave most grout as is but regrout sections that are cracked (see photos). I believe the previous tiler (5 years ago) used epoxy grout. -To use own tools and supplies. Professional finish

Need to remove the existing silicone inside and outside the shower and new silicone to be put.

Need someone experienced with bathroom/shower resealing to remove and replace mould-affected silicone around the base of our shower nib wall and adjacent shower screen. Scope: * Remove existing mouldy/failed silicone around affected joints * Clean and treat any mould underneath * Allow/prep surfaces appropriately before resealing * Apply new high-quality sanitary/bathroom silicone with mould resistance * Check adjacent silicone joints and advise if any other sections should also be replaced * Leave area clean and watertight Photos attached. Tiles appear to be in good condition, so expecting this to be a straightforward resealing job unless anything unexpected is found underneath. Please bring all tools and materials. Experience with shower/bathroom silicone removal and resealing preferred.

Hi there, I need an experienced handyperson or caulking professional to replace the silicone sealant in my shower. Scope of Work: Remove: Completely strip out the existing old/damaged silicone. Clean & Prep: Thoroughly clean and prepare the surfaces (must be completely free of old residue, soap scum, and mould) so the new sealant adheres properly. Seal: Apply new, high-quality, mould-resistant wet-area silicone. Sealant Colour Required: Grey. (Please supply the silicone, e.g., Sikasil, Selleys, or similar high-quality brand). Measurements (as per attached photos): Back wall floor joint (red line): 903 mm Side wall floor joint (red line) 1.2 m Linear drain perimeter (blue line): 1,860 mm Total caulking length: Approximately 4 metres. Other Details: Please see the attached photos for the exact areas needing work. I will ensure the shower is completely dry before you arrive. Please let me know your experience with caulking/sealing and confirm that you will bring the necessary tools and grey sealant.

Someone to please clean the bathroom (including taking the fan cover off and removing lint from the vent). And then please putting new silicone down on the shower and at the base of the loo, because water leaks out of the shower at the moment. And then if possible it would be great to have assistance repairing the soap shelf that has fallen off/broken, although I don’t know if this bit is possible? Thanks

Quick and easy job for an experienced handyman or someone who works with bathroom repairs. The job requires: 1. Sealing with silicone the tiled floor perimeter of the shower as the old silicone is coming apart. 2. Sealing with silicone a small area above the bathroom basin. 3. Sealing with silicone a small area on the floor tiles around the wall perimeter of bathroom. Note: The entire bathroom is small, approx 2.5 meters x 2 meters.

I need someone to come and re seal the silicon in this shower. Remove old and install new silicon. Max $70 budget.

Looking for an experienced person to remove and replace the silicone edging/seal on 1 edge of my shower - 800mm. The existing silicone is old/discoloured and I'd like it removed, the area cleaned/prepared and new bathroom grade, mould-resistant silicone applied. May require grout. I'm looking for a clean, neat and professional finish so the shower looks fresh and new. Please only respond if you have experience with shower/bathroom silicone work. Photos of previous work would be appreciated. Please provide your quote and availability. Thanks

Looking for someone to help reseal one small section of silicone around a bathroom door frame where there is a minor gap. Just needs to be cleaned and resealed neatly with bathroom-grade silicone. It’s a small and straightforward job.

Need an experienced bathroom sealing/waterproofing professional ASAP. I attempted to remove some mouldy silicone and reseal the shower myself, but the seal has failed and water has leaked through, so I’d like it fixed properly. Job includes: * Remove the failed silicone seal along one side of the shower (approx. the length of the shower). * Clean and prepare the area thoroughly. * Apply a professional-quality, mould-resistant bathroom silicone. * Check for any gaps that may allow water to escape and ensure the shower is fully watertight. It’s only a small job (one long edge of the shower), but I’d like someone with experience in bathroom sealing rather than a general handyman. Please bring all tools and materials.

The Silicone Sealants in both bathrooms of the unit have blackened and are to be completely removed and resealed. The task is for quote.

Replace mouldy shower silicone and install shower door water seal Please note I am looking for silicone replacement, not just mould cleaning.

Need new silicone in the shower area. There is mould under the silicone, I just need some fresh silicone around the base of the shower and a little outside of the shower. I’ve attached a photo of the colour of the original grout- light grey.

Need shower resealed in bathroom. Existing silicone is old/cracked and needs to be removed and replaced with new waterproof, mould-resistant sealant. Looking for someone experienced with bathroom sealing and silicone work.

Reseal shower as it is leaking

Hi, I’m looking for an experienced installer (ideally glazier or bathroom specialist) for a small bathroom update. Scope of work: * Remove existing U-shaped shower rod and patch/repair tile holes * Remove old silicone around shower base and re-seal properly (waterproof joints) * Supply and install a fixed frameless arched (please see photos for reference) glass panel (approx. 50–70cm wide, ~2m high) on the toilet-facing side of the shower * Ensure clean finish with colour-matched silicone (tiles are travertine-look) Bathroom setup: * Open walk-in shower with a raised hob * Panel will only be installed on one side (toilet side), no panel on washing machine side * Goal is to reduce splash and improve waterproofing Requirements: * Experience with frameless shower glass installation * Must be comfortable drilling into tile without damage * Please specify: * Glass thickness (expecting ~10mm toughened glass) * Mounting method (brackets vs channel) * Whether supply of glass is included Notes: * Photo attached for reference * Looking for a clean, long-lasting result (not a quick patch job)