Hire a professional washing machine repair service in Parramatta

While moving house the plug of the washing machine broke, I have bought the part I need someone to fix it. I have also attached the picture.

The washing machine was reinstalled since than it is not rinsing

There is a leakage coming out of a socket at the back of my washing machine. Whenever the machine is turned on ALL the water comes out of that socket. I need someone to come and fix it as soon as possible.

The hose in the back of our washing machine has come out of our washing machine. We have tried putting it back in but not staying in.

Samsung washing machine- its not working properly. It stops midway - specifically during the water drain process. I’ve tried basic troubleshooting (clean pipe, filter, etc).

Upon moving to a new house, the inlet connection in the washing machine is leaking.

Take off and put on European laundry door Install and connect washing machine

The washing machine has been displaying error code E:04 (water overflow) intermittently for several months. Recently, during a wash cycle, the machine overfilled and began leaking water from the front/door area. When the cycle was paused and water was manually drained from the pump filter, the leaking stopped and the machine was able to continue temporarily. This suggests an intermittent drainage issue, likely related to the drain pump or water level control, rather than overloading or detergent use. The machine is currently unplugged for safety.

EP error on washing machine needs fixing

Bosch series 8 door seal gasket

The water is accumulating in the base of the BOSCH series 8 washing machine during every wash and showing ERROR CODE 23. I have to tilt the machine a bit to remove the water. Once the water is removed then only the machine starts. But again after sometime ERROR CODE 23 occurs. Please it need it to be fixed. BOSCH series 8 washing machine.

When you open the lid there’s a leakage from the powder/liquid drawer

The seal on the washing machine is ripped

Hi, I had someone replace the rubber part of my washing machine but he injured himself in the job. It looks like he’s put the new part on refer to pics and now I need someone to put the machine back together

I noticed my washing machine today started leaking during a cycle. When I opened the door, I noticed the rubber was torn. It’s haier washing machine. Only 2 years old.

I only have hot and cold isolation valves under the laundry sink for the mixer, and there is no washing machine connection point. I need a plumber to: • Use the existing cold-water line under the sink • Install a fixed, dedicated cold-water outlet for the washing machine • No external tap required • Ensure the outlet is positioned safely and complies with NSW plumbing standards

Samsung washing machine showing SC error And not draining water out

Moved to a new place and the pipe in the laundry has not been drilled out to connect the hose. Once drilled please also connect the hose. I think we have the right part to connect. Please see picture. The hot and cold water hoses have been connected. Thanks

Need assistance moving the old washing machine in the laundry to make space for a new one. Both machines are less than 1 meter apart, so the old one needs to be shifted to allow installation of the new washing machine

Replace a rubber door seal on front loader washing machine with a new one that has been bought