Hire a professional washing machine repair service in Gold Coast

I need help with several small jobs. All replacement parts are supplied, but you’ll need to bring the correct tools. 1. Clean, refit and securely tighten both car battery terminals. Please bring a proper battery terminal/post cleaning brush, basic spanners or sockets, gloves and suitable terminal protectant if you use it. 2. Attach the supplied battery monitor fork connectors to the battery terminals. Basic spanners or sockets will be needed. 3. Replace both supplied bonnet gas struts. Please bring a safe adjustable bonnet support or prop, plus a small flat-blade screwdriver or pick for releasing the retaining clips. 4. Refit the loose outer door-seal retaining wire/spring ring on a front-loading washing machine. Please bring suitable spring-clamp pliers, long-nose pliers or other tools normally used for fitting these retaining rings. 5. Level and stabilise the washing machine using four supplied adjustable anti-vibration/levelling pads. Please bring a spirit level, adjustable spanner and anything needed to safely raise or shift the machine slightly. The dryer is stacked on top of the washing machine, so care may be needed when levelling it. No vehicle diagnosis or major appliance repair is required. I’m looking for someone practical who already has the tools and experience for these straightforward fitting, cleaning and adjustment jobs.

Beko washing machine malfunctioning. It’s not completing any wash cycle, the door lock sign immediately comes on, which it did not do before. According to the manual the door lock sign coming on indicates water level unstable or a safety issue. I had to drain it a few times and filters are clear. Appears to be more of a technical issue.

Simpson 8kg washing machine is not emptying the water and not spinning when it should on the cycle. Water remains in the drum and spin cycle stalls. Located in Bundall, Gold Coast

Hi all, Need a washing machine connected to water, current cords aren’t long enough, have attempted to sort myself but fell short. Will require additional hoses ect (will pay for them on top of the job). Also need dryer hooked to power, it has all the holes through cupboards but feel like they may not be big enough. Photos for reference.

The washing machine is not working properly. It appears that the pump has failed and needs to be replaced. Please inspect the machine and install a new pump if required, and test the washing machine to ensure it is operating correctly after the repair. Fisher and paykel topload

Fit the seal in my washing Machine I have the new Seal I have no idea how to do it

Washing machine needs a service. It seems to be getting louder and is leaking a bit of water.

Something has stuck underneath the drum of samsung washing machine

Meet me at Good Guys Pimpama to collect. Instal new one and remove old one. Good guys is located 4 minutes from my house.

Front loader TLC washing machine retaining ring snap fix . Put retaining ring back.

Pickup washing machine from Surfers paradise address, deliver to another surfers paradise address. No stairs, elevator on pickup, ground floor for drop off easy access. When you arrive to my address to deliver the machine, I need someone to pull out the existing washing machine from its cubby and put in basement for me as I no longer need. Must have some basic knowledge of how to connect a washing machine pipe hose as I don’t have a clue 😅

Have a brand new dishwasher to go into downstairs studio! It has the power point there already, but will need to be connected to water. The dishwasher will sit approx 1 meter from the kitchen sink and pipes. Must be done by a qualified plumber

Need a plumber to replace a faulty washing machine isolation tap under laundry sink. Issue: * Tap continues running water even when turned fully off * Located under laundry sink and connected to washing machine cold water hose * May need replacement of mini stop valve / quarter-turn isolation valve * Small amount of water present in cabinet so would like fixed ASAP

Need a licensed plumber to relocate washing machine plumbing approximately 1.5m to the left along the same wall for a new under-bench laundry layout. Existing wall will be exposed for easy access. Looking for quotes including labour and materials. To be completed Monday 25th May.

Hi, my washing machine got stuck during the spin cycle while washing blankets. It seems to be an unbalanced load issue and now the machine has stopped mid-cycle. It does spin but gives a loud banging sound

My Westinghouse WWT6084J5WA top loading washing machine has stopped working properly and needs someone to come take a look. Issue: * Machine spins fine when empty * When loaded (towels/sheets), it makes a loud metallic clacking noise * Drum appears to be partially jammed under load * Previously showed an EFO error (drain issue) * Sounds like a coin or small metal object is stuck between the inner drum and outer tub What likely needs to be done: * Remove agitator (centre column) * Locate and remove foreign object * Check pump for any debris if needed * Reassemble and test ⸻ Looking for: * Someone with experience in appliance repair or washing machines * Ideally has tools to remove agitator and access drum/pump

Looking for someone to pick up a washing machine from good guys locally and take it to our apartment in surfers paradise and install it. Old one will need to be removed as well.

Connecting the washing machine to the water source. The valve is too hard to turn and therefore cannot connect the water. Washing machine turns on.

Servicing of Bosch Series 8 Washing Maching and dryer. Both still working, but could benefit from a checkup, clean and service.

My washing machine won’t finish the spin cycle. It seems to be a balance issue.