A beautiful pool table with blue felt in a bright room with floor to ceiling glass windows.
A beautiful pool table with blue felt in a bright room with floor to ceiling glass windows.

Find an experienced pool table assembler near you

Fill in a short form and get free quotes for professional pool table assembly services

When you need help with pool table delivery and assembly

  • Pool table setup
  • Snooker table assembly
  • Billiards table assembly
  • Refelt pool table
  • Pool table assembly
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated pool table assemblers near me

Recent Pool Table Assembly reviews

Excellent job by Nel and his friend Yass ! On time, wore masks and shoe covers and were tidy and clean. Polite and very helpful. Respected the property and were very careful. Dismantled, moved and re-assembled 7 foot pool table with a very heavy slat bed. Definitely would recommend and would use again !! Bravo 👏👏👍

Move a 7ft pool table to another room c20 feet away and up 2 steps.


Quality service! Great communication. Got the job in under 3 hours. Will defo recommend.

Pool Table Disassemble, Deliver and Reassemble


Paul was available straight away and put the pool table together in no time. Managed to lift a very heavy slate and made sure I was happy with all the details.

Pool table installation


What's the average cost of a Pool Table Assemblers

£174 - £225







Low, median and high bar chart distribuiton

Average reviews for Pool Table Assembly Services

based on 3 reviews



What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.


Tasks successfully complete


Avg. quotes per task



Avg. time to receive offer

Why hire a Pool Table Assembly service through Airtasker?

While you may be excited to set up and use your brand-new pool table right away, it’s more cost-efficient to hire a pool table assembly service from Airtasker, especially if you’re not used to assembling tables. The specialists you hire to do this job are more adept at pool table assembly - avoiding all possible damage to your new pool table.

Booking a pool table assembly service via Airtasker is also more convenient. You don’t have to pore through websites of different service providers and wait for emails. There’s no need to go around town to look for a service provider - our platform can bring local experts right to your doorstep. Not to mention, you’re free to do other things or relax as your Tasker does all the work in your games room.

All you have to do is make a job posting on Airtasker. List down all the details, including: specifications of your pool table, your budget, your address, and time. Taskers will approach you about your job, give you a free quote, then get to it at a moment’s notice.

Real reviews

Judge for yourself – every pool table assembly task gets a review.

Offers in no time

Start getting pool table assembly offers to do your task ASAP!

Flexible pricing

Choose the offer that’s right for you.

Local, skilled pros

Take your pick of skilled Pool Table assemblers nearby.

Top Pool Table Assembly related questions

Given that some processes in pool table assembly involve precision levelling, cutting and allowing adhesives to dry, the job can take anywhere from 4 to 8 hours. Other factors that can make the time shorter or longer include the level of expertise and experience of the specialist. For instance, if you have a Brunswick pool table, hire a specialist that’s acquainted with this brand to make assembly go faster. However, a job like this shouldn’t be rushed.
One of the main benefits is foregoing the difficult work of putting the frame together, handling the heavy slate pieces, doing a lot of measuring, and tightening bolts and screws. You don’t have to deal with stretching out the felt and risk tearing it or having wrinkles. There are many things that can go wrong when assembling your pool table, and hiring a specialist to do it for you helps you avoid any headaches.
In most cases, no. Specialists are expected to have all the necessary tools and safety equipment for doing the jobs they were hired to perform. You are not obligated to supply specialists with any of the needed tools or equipment, although you may still offer whatever tools you think may help in making their job easier and faster.
Yes. You can hire Taskers for pool table disassembly as well. Since this can be complicated and there can be a risk of injury or damaging your pool table, it’s advisable to hire experienced specialists to do the disassembly. You can find specialists for this in a related service page, that of playground assembly. Note that services vary from specialist to specialist, so please mention that you’re hiring someone to take your pool table apart and not putting it together.

Suggested reads about Pool Table Assembly

What do pool table assembly services include?

Pool table assembly services include the necessary steps to make your pool table ready for play. Specialists will go to your home and assemble the legs, corner frame and frame, lay down the playing surface, cover the surface with felt, cut the ball pockets, install the railings and secure each part of the pool table with the supplied washers, nuts and bolts. Specialists will also work to ensure that it’s perfectly level for the years to come. 

Assembling the legs, corner frames and cabinet

Assemblers usually follow the enclosed pool table assembly instructions. They will assemble each of the four legs and bolt them along with the supplied nuts, bolts and washers. They usually assemble the corner frames, cabinet and legs while ensuring they are flush and made secure with washers, nuts, bolts and wood screws. To finish, they place the corner trim pieces, making sure that these pieces are flush with the bottom and top of the cabinet. Specialists may do some minor sanding if the trim pieces aren’t flush with the cabinet. 

Installing the inner frame

Next, the specialists install the inner frame beams. These will support the playing surface, usually consisting of three slate blocks. The usual practice is for specialists to lay down the wood beams and tap them into place with a rubber mallet. Specialists install the frames and ensure that the structure is both flush and sits level on the pool table cabinet. 

Playing surface assembly

After installing the frame and ensuring its level, laying down the playing surface is the next step. The playing surface usually consists of three heavy sheets of slate. Slate support blocks are first bolted onto the inner frame to accommodate the playing surface. After that, specialists screw the three slate pieces onto the support blocks, using the pre-drilled holes on the slate pieces. Specialists can ensure that the slate pieces are flush and level, then seal the seams between the pieces with drywall spackling.

Installing felt playing surface

After assemblers fill the seams between the slate pieces with drywall spackling and allow this to dry, they clean the surfaces of dust and debris. They then drape green felt on the slate, and attach the felt section by section with industrial adhesive, pulling taut on the felt as they go. Assemblers then cover each of the pockets with the felt, smoothing out any wrinkles as they glue the felt down. They spray the felt with adhesive and clamp it down for a couple of hours. 

Installing the Rails

The top wooden rails are laid out over the felt, with the leather ball pockets fitted onto the rails. Each piece of the rails and the six pockets are bolted together. Once assembled, the wooden rail frame is placed on top of the felt. This is then aligned with the notches for the pockets. Your assembler then bolts down the wooden rails, then attaches pocket screws to the wood-slate frame, completing the assembly.

Recent Pool Table Assembly tasks

Pool table assembly


Alderley Edge, Cheshire

9th Oct 2023

Slate pool table assembly - Due date: Flexible

Re felting pool table


Sawston, Cambridgeshire

2nd Sep 2023

Son has a pool table and for his 18th birthday i would like to have it re felted - Due date: Needs to be done on Wednesday, 27 September 2023

Pool table


Sunbury Common, Surrey

22nd Aug 2023

Putting a pool table back together - Due date: Flexible

Moving a 6ft slate bed pool table 6 miles drive away


Brookfield, North Yorkshire

26th Jul 2023

Table weighs 190kg, here is a link to its specification/dimensions: https://www.libertygames.co.uk/store/pool_tables/slate-bed/avant-garde/ - Due date: Before Saturday, 9 September 2023

Dismantle, Transport and re assemble pool table


Old Coulsdon, Greater London

6th Jul 2023

I need a slate bed pool table to be dismantled and transported 3 miles away then re assembled. I can transport if needed. - Due date: Flexible

Recover pool table


Walkern, Hertfordshire

21st Jun 2023

American 7 ft slate bed pool table needs bed and bumpers recovered - Due date: Flexible

Pool table refelt


Tower Hill, Greater London

19th May 2023

pool table in office needs a refresh and fixing - Due date: Needs to be done on Thursday, 25 May 2023

Assembly + re-cloth a Brunswick American 7ft pool table in Redhill


Redhill, Surrey, RH1

12th May 2023

I have a Brunswick American 7ft pool table that needs assembly and leveling (3 piece slate) and re-cloth with Hainsworth Elite-Pro Camel. The parts are all in the room where the table will be assembled. - Due date: Flexible

Pool table installation


Elmbridge Village, Surrey

10th May 2023

A 6 foot pool Table needs I stallng from flatpak - Due date: Flexible

Paul was available straight away and put the pool table together in no time. Managed to lift a very heavy slate and made sure I was happy with all the details.

Pool table installers


New Town Row, West Midlands

3rd May 2023

Installation of billiards cloth - Due date: Needs to be done on Saturday, 6 May 2023

Installation of a 6ft slate pool table .


Wallington Heath, West Midlands

30th Apr 2023

I have purchased a 6ft slate pool table , it is being delivered but will require assembly and installation . - Due date: Flexible

Pool table


Arrowe Hill, Merseyside

27th Apr 2023

2.2m x 1.25m x 0.85m pool table slate bed assembled - Due date: Flexible

Disassemble, transport, and reassemble 7ft slate bed pool table.


Princes Risborough, Buckinghamshire

16th Apr 2023

Disassemble 7ft slate bed pool table. Transport to Studland, Dorset. Reassemble. - Due date: Flexible

Remove American pool table


Cranham, Greater London

27th Feb 2023

Remove American pool table from loft room - Due date: Flexible

Assemble a Sam K-Steel 9ft Pool Table


Nether Hall, Leicestershire

22nd Feb 2023

I have a Sam K-Steel 9ft pool table in my outbuilding which simply needs to be assembled together. None of the parts need to be carried/transported from one place to another, all of the parts are in the room, ready to be assembled together. - Due date: Flexible

Full assembly of a pool table


Lairg Muir, Sutherland

5th Jan 2023

Fully dismantled pool table that needs assembling. - Due date: Flexible

Disassemble and take pool table into next room and reassemble


Lambeth, Greater London, SE1

14th Dec 2022

Disassemble and take pool table into next room and reassemble, strikeworth 7ft pool table - Due date: Needs to be done on Thursday, 15 December 2022

Assemble American pool table


Temple Hill, Kent

12th Dec 2022

I have all the parts of American pool table that need to be assembled. The 3 piece slates are also ready to be assembled.

Dismantle and removing a pool table


Wike Well End, South Yorkshire

28th Nov 2022

To dismantle and remove a pool table and to reassemble it at a different location. - Due date: Flexible

Dismantling a pool table, then to reassemble


Wike Well End, South Yorkshire

28th Nov 2022

I need a professional to dismantle a pool table - Due date: Flexible