Custom Shelving Jobs in Soho

Browse through over 500 Custom Shelving Jobs.

Why join Airtasker

Custom Shelving tasks in Soho

Check out what tasks people want done near you right now...

Sew custom cat show curtain set + matching mat & donut bed (materials supplied by sewer) Description: I’m looking for an experienced sewer to create a coordinated cat show curtain set for my show crate. Crate size: 76cm (L) x 57cm (H) x 53cm (W) What I need made: * Curtains to cover the two sides and the back of the crate * Curtains to have a slight gathered/ruffled look using elastic * Tie ribbons to secure the curtains neatly to the crate * A mesh/tulle overlay layer on the curtains * A padded mat to fit the base of the crate * A matching donut bed * The donut bed to also feature the matching mesh/tulle overlay The entire set needs to be cohesive and matching in fabric and design, suitable for cat shows (neat, professional finish). I’m after a polished look rather than basic crate covers. This is for cat shows, so attention to detail and neat finishing is important. Materials: You will supply all materials required, including fabric, mesh/tulle, padding, thread, elastic and any other notions/tools. Please include material costs in your quote. I’m happy to discuss fabric colours/styles before you purchase. You will need your own sewing machine and tools. Please include: * Photos of similar sewing work (if available) * Your quote (including materials) * Estimated turnaround time Located in the inner west – happy to meet locally or arrange postage.

Fri Feb 13 2026

about 3 hours ago

Open

Wondering how much someone would charge to build an air conditioner cover out of wood to cover an outside air conditioning unit. I can pick it up within 20-30 mins of Hope Island. I'll paint it - just would like it built. Approx measurements 900 x 900. The photos attached is what I'm looking for..

Thu Feb 12 2026

about 11 hours ago

Open

Since a proper heavy-duty metal portable housing is not available in the market, I am looking for a metal fabricator to build a custom housing similar to the attached photo. Housing Requirements: • To securely hold: • 2.2L oxygen cylinder • MAPP cylinder • Steel construction (light but strong) • Carry handle • Base plate support • Protective frame around regulators • Strap or clamp system to secure cylinders • Stable upright design (no tipping risk) • Powder-coated preferred (optional) Purpose: Used for rooftop refrigeration brazing work. Must be safe, durable and compact.

Wed Feb 11 2026

2 days ago

Open

Need 1 fitting room curtain, Eyelet 3000w x 2900drop We also need another custom fabric feature to sit above a custom table. table is 2400 x 1000

Tue Feb 10 2026

3 days ago

Open

Looking for an experienced cabinet maker or carpenter to build a custom mobile bar for my events business, similar to the photos attached. Base Size Required: • Height: 1100mm total (800mm working bench + 300mm serving bar) • Width: 1400mm • Depth: 600mm Requirements: • Mobile bar with 4 heavy-duty lockable wheels • Strong construction suitable for frequent transport and events • Rear working shelf and internal storage • Smooth front panel suitable for branding or signage • Professional paint finish (white preferred) • Durable top suitable for heavy bar use • Provision or installation for: – Central ice well / sink – Speed rails for bottles Material Preference: • Pine plywood or similar commercial-grade material • Professional sprayed finish preferred (durable event-grade finish) Bar will be used weekly, so durability and build quality are important. Please include in your offer: • Total price • Build timeframe • Previous similar work (if available) • Pickup or delivery options Location: Melbourne

Tue Feb 10 2026

3 days ago

Open

I am wanting to build a low deck 290mm , not attached to a house over a cement slab. I am needing help to create the plans for Meri-bek council for a permit.

Sun Feb 08 2026

5 days ago

Open

I am looking for a metal fabricator to create a custom-fit, removable cover for an ice well in my kitchen island. The purpose is to use the surface as a glassware drying rack. Key Specifications: Dimensions: The well is 740mm (length) and 145mm width so will need to cover that and have a few mm on all sides to cover over the edge. Ideal Material: Marine Grade Stainless Steel (must be rust-proof). Thickness: 2 mm to 3mm and must be rigid enough to support a full load of glassware without bowing. Happy to take guidance on grade and thickness. Design: Drop-in Flange: A small lip (approx. 10-15 mm on all sides so the tray sits securely on the countertop. See attached photo for the ideal design. Perforation: Round perforated drainage holes throughout the main body. Lifting Mechanism: Two oval finger holes positioned in the dead-center of the tray, spaced for a "pinch-grip" lift (thumb and forefinger) similar to the existing openings shown in the second photo, to allow easy lifting and removal of the cover. Finish: Brushed finish to match standard kitchen appliances. All edges must be deburred and polished smooth to prevent scratching the stone or glassware. Requirements: Please provide photos of previous custom stainless steel work. Quote should include materials, fabrication, and delivery (although if you are close to where I live I am happy to pick up). Must be able to provide a clean, high-end finish suitable for a modern kitchen. More specific: Style: Drop-in tray with a 15 mm lip to sit on top of the stone benchtop. Drainage: Laser-cut perforated hole pattern (staggered round holes). Lifting Handle: Two oval slots in the center separated by a solid 15mm "bridge" for a one-handed pinch grip. Finish: Brushed finish, all edges must be deburred and rounded (no sharp edges). Material: 2.5mm or 3mm thick 316 Stainless Steel for rigidity.

Sat Feb 07 2026

6 days ago

Open

Supply to Noosa, Queensland We’re looking for a skilled carpenter or cabinet maker to build and supply a custom timber bench/shelf to sit on top of an existing reception desk. This bench will be used daily for keyboards, mouse use, and writing, so it needs to be solid, stable, and well-finished. Specifications • Overall height: 30 cm • Depth: 45 cm • Width: 67 cm • Internal shelf: • Positioned approximately halfway up (around 15 cm from the base) Material & Finish • Preferably a nice hardwood timber (exact species and colour not critical) • Thickness should be sturdy enough to comfortably withstand typing and writing • Clean, professional finish suitable for a reception environment Build & Delivery • To be made off-site (at the tasker’s workshop/home setup) • Delivered ready-made on-site to Noosa Heads, QLD • All materials to be supplied by the tasker Other Details • We already have an existing one made that can be referenced for guidance if needed • The unit should arrive fully completed and ready to place on the reception desk If you have experience with custom timber furniture, reception desks, or cabinetry, we’d love to hear from you. Please include photos or examples of similar work if available.

Fri Feb 06 2026

7 days ago

Open

I need constructive details, dimensions, materials, etc. All you can need to build your own trailer from scratch.

Fri Feb 06 2026

7 days ago

Open

Browse all tasks

Last updated on 13th Feb 2026

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

We've got you covered

Whether you’re a posting a task or completing a task, you can do both with the peace of mind that Airtasker is there to support.

Airtasker’s insurance cover