Find a local timber flooring profesional in West Melbourne

Timber post staining, materials supplied I just need someone who can do this without making a mess. $30 per hour, there’s a fair bit that needs to be done.

Need timber to be machined sanded back to raw timber on top of garage door above window and pillar

Need to sand and varnish ~25 to 30 sqm of timber floor.

I need to remove the tiles of my apartment and level the floor to get them ready to install hybrid floor

Need a 6x2.4 wall frame, insulation, plasterboard along with a 6x4 floor with 70x35 timber battens , insulation and 19mm sheet flooring done

Looking for an experienced professional to supply and install timber flooring. Total area is approximately 130 m² including stairs. The work is for a residential property in Point Cook. I will be available on site and can assist if required to make the job easier. Please contact me with your quote and availability.

Raw finish timber front door needs stain and varnish ASAP. I have a stain and varnish product which hopefully suits the job. I started doing it myself but immediately worried about it being uneven and stopped. Bonus points if you can even out the one lighter panel on the front. (Not the difference in timber colour in the images is just lighting). Need this done Sunday 15 or Monday 16 March.

POLISH TIMBER FLOORING - dining/living area. Job to be completed this week. Location Melton South

I have one ripped Merbau decking board that has lifted. Need a handyman to re-secure the board flush with the deck. Please bring a drill, bits, and appropriate decking screws. May need to pre-drill and countersink to prevent splitting the thin board

sand and polish an existing timber floor in a two bedroom unit

5m x 1.4m timber decking at front of house needs to be sanded back before I have it painted. You must have experience and have the sanding equipment. Flexible with timing.

I have a wooden deck and some steps I need sanded so that I can apply decking oil. The areas is less then 15 sqm

Sand, clean and recoat back yard timber deck using specific products (ie approved deck cleaner, feast Watson stain etc). Minimum 2 x coats of feast Watson stain required. Top section of Deck is prob 10m2 approx. Would also need the deck upstands (low height walls) and the deck steps done.

Need repairs , sanding & varnish of timber flooring about 55sqm Please quote for the job?

We have timber floorboards with darkened edges between boards. This is not dirt — it appears to be wear in the finish / grain absorption along the board edges. We are looking for someone experienced in timber floor restoration to: • Assess the floor condition • Advise whether a buff and recoat or professional touch-up / blending is suitable • Carry out the work to improve the appearance (not a full sand unless advised) The floor is in good overall condition — this is mainly a cosmetic issue in visible areas. Please only respond if you have experience with timber floors (parquetry / solid timber / engineered). Photos can be provided on request.

We have timber floorboards with darkened edges between boards. This is not dirt — it appears to be wear in the finish / grain absorption along the board edges. We are looking for someone experienced in timber floor restoration to: • Assess the floor condition • Advise whether a buff and recoat or professional touch-up / blending is suitable • Carry out the work to improve the appearance (not a full sand unless advised) The floor is in good overall condition — this is mainly a cosmetic issue in visible areas. Please only respond if you have experience with timber floors (parquetry / solid timber / engineered). Photos can be provided on request.

Build a low profile timber or composite deck. Length 11,260mm x Width 1230mm I can provide 2 extra people to assist with labour

Laminated floor planks split due to water leakage. Now need to fix

Looking for an experienced tradie to fully sand back and properly refinish internal timber stairs. Anytime between 20th and 25th Jan Details: Approx 14 timber treads (including winders) Existing finish is worn on nosings with a few scuffed areas 2 small gouges to be repaired with timber filler Require full sand back to bare timber (not just a light scuff) Refinish with a high-quality stair-grade clear varnish or polyurethane Minimum 3 coats, suitable for stairs (durable, non-yellowing) Materials to be supplied by you and included in the price Clean, tidy job with proper prep and cleanup Please include in your offer: What product/finish you will use (brand + water/oil based) How many coats Estimated timeframe and drying time between coats Examples of similar stair work if available Home is occupied, but I will be out each day, however walls have just begun painted , so clear communication and care with dust and drying is important. I’ll check quotes later today, will reply then.

Have 3 patches of discolouration on my timber floor due to bleach. Looking to get back to original as much as possible without replacing floorboards