Find a professional floor screeder in NSW

Need tiler for small bathroom screed. You provide sand. I provide cement and angles. Ground floor easy access

Looking to have our front patio area screed bedded. Builder has confirmed not suitable for concrete as it lies over an existing slab with too much movement for another concrete foundation. Looking for quotes

I have three shower stalls which are being waterproofed today and will require screed and then tile to the ceiling (tiles to be supplied) each stall is approximately 1.5 m deep by 750 wide and 2.4 Tall with nib walls and niches

Need to screed and tile this garage , entry is very easy , sand and cement will be supplied as well as tiles and glue

Shower screed and tiling , I will prepare tiles and do grout ,glue by myself. You just need to do screed and tile

I have an ensuite that requires screeding, waterproofing and tiling

Looking for quotes for veranda screeding and tiling using encaustic tiles. Experience with this type of tile essential sealing and finishing important. Space is 4 m by 2 meters

Looking for someone experienced with concrete floor levelling, screeding, floor toppings or self-levelling compounds. We have a downstairs room with an existing concrete slab that has an even fall/slope across the width of the room. The room is approximately 6.7m long x 3.9m wide. The fall is roughly 50mm across the 3.9m width, from one side wall to the other. We are wanting to make the floor more level and usable so we can install flooring later. We are open to advice on the best practical option, such as bonded screed, floor topping, self-levelling compound, or similar. The room has limited ceiling height, so we do not want to build the floor up more than necessary. Looking for someone to inspect/quote and advise whether this is suitable for levelling/screeding. Please only respond if you have experience with this type of work. Happy to negotiate price etc

I’m having a kitchen installed and need the existing concrete kitchen floor to be levelled for a kitchen installation. I would like someone to get the materials from Bunnings or hardware store, prep the floor, prime it and apply the self levelling concrete. The installer starts tomorrow (Monday) and I’ve just learnt my existing TRADIE can’t make it. 2.5 x 3.3 metre space. Depth 15mm

Jackhammer 9 sq mtr (2.3x3.8) tiles and screed. Screed is 3cm see picture Room will be empty, no cupboards. Tiles and screed to be taken to front of boundary (slop uphill good access for wheelbarrow) Need your own jackhammer, but not too big because tiles are on thick fibre sheet above ground. Ground floor.

Screeding a section outside terrace, depth 70mm , width 200mm, length 3400mm

Screed floor I have sand bring about 6-8 packs cement

I need half of my living room and my bedroom sand cement screeded to prep for floorboards installation

Concrete Cutting to remove existing parking stopper and flower bed cutting. Screeding back to make smooth.

Looking for a tiler to screed and tile a small bathroom floor (about 4 sq m) and also install the first line of wall tiles. The room has been waterproofed. I have tiles and grout, but do not have screed materials. Note this is an off-grid property. We have a generator and power box for power tools. There's a 30 min drive along a dirt road from Great North Rd. If required to save you driving out too many times, I could do the grouting.

Hello! We have a holiday van/anex at Diamond Beach holiday park. We have a big pile of crusher dust that needs to be leveled (screeting) over single car port and van entry. Wont take long. Need this done and level before we put down artifical turf over the crusher dust.

I need a 10 sqm sunroom screeded and tiled in 600mm porcelain. Pre-existing porcelain tiles must be screeded over. All materials (cement, sand, Bondcrete, adhesive, grout and tiles) supplied. Newtown location.

Looking for an experienced tiler/waterproofer for a bathroom renovation in Sydney. Approximate scope: - Wall tiles: ~26 m² - Floor tiles: ~5 m² - 2x wall niches - 2x floor wastes - Screeding / floor prep with correct falls to wastes - Installation of supplied under-tile heating mat/cable - Waterproofing - Tiling - Grouting and silicone Tiles, wastes, and under-tile heating mat/cable will be supplied. No need for mitre joints, regular corner joints are fine. Please quote for labour and tiling-related materials, including adhesive, grout, trims/sundries, waterproofing materials, silicone, and any required floor/wall prep. Please clearly confirm whether your quote includes: - Screeding / floor preparation - Correct falls to both floor wastes - Waterproofing - Installation of supplied under-tile heating mat/cable - Tiling around 2 wall niches - Set-out suitable for later frameless shower screen installation - Grouting and silicone - All tiling-related materials, excluding tiles and heating mat/cable Waterproofing needs to be done properly to AS 3740. The bathroom will have a frameless shower screen installed later, so tile set-out, wall finish, falls and shower area detailing need to suit clean installation. Shower screen supply/install is excluded unless you specifically quote for it. Electrical connection for the heated flooring will be handled separately by an electrician if required. Please specify whether you can install the supplied mat/cable only, or also handle any electrical side. Please provide: - Fixed price or itemised quote - Availability - Examples/photos of previous bathroom tiling work - Experience with niches, floor wastes, waterproofing, screeding, heated floors and frameless shower screens

Screeding and tiling are required. I have a unit on the first floor, with easy access and parking. The existing tiles, shower screen and waterproofing, will be done on the 14th March. The screeding and tiling are required. The tiles are 200 x 200 mm, the shower is only 900 x 900 with 2 rows of tiles on each side being changed. We are after a licensed tradesman with insurance. Please contact for more information if required. Photos are before tiling is removed.

Supply and Installation of Semi-Bonded Screed MAXIMUM 80mm thickness (0-6m2) USED WHEN THICKNESS EXCEEDS 50mm *Supply and install semi-bonded sand and cement screed to build up floor height and achieve correct levels and falls to waste prior to tiling. *The screed is applied over the first layer of waterproofing membrane, forming a semi-bonded system that allows limited movement while maintaining structural stability and drainage accuracy. * Maximum Thickness: 80 mm * Includes light reinforcing mesh to provide shrinkage relief and additional stability.