Find a professional hot water system contractor in North West Melbourne

Fill in a short form and get free quotes for local hot water system contractors in North West Melbourne


Excellent rating - 4.5/5 (9200+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
Up to 50% cheaper than franchise dealers
No job too big or too small
No job too big or too small
Free insurance coverage
Free insurance coverage
Secure cashless payments
Secure cashless payments
Same day / next day service available
Same day / next day service available

Best rated Hot Water System Installers near me

Recent Hot Water System Installation & Repair reviews in North West Melbourne

"On time professional highly recommended "

Hot water pipe leaking


"Absolute great service. Highly recommend "

Need plumber to fix leaking hot water solar panel


"Prompt & punctual service, Micheal knows what he is doing - Thanks a lot mate! "

Hot water system repair


"Great airtasker!"

Leaking hot water unit (outside)


"Good job. In time and timely information of the work. Keep it up Mark. Regards Raj "

Hot water pipe leak


"Great job !"

20 min Job- Turn on pilot flame of Gas hot water


What's the average cost of a Hot Water System Installer in North West Melbourne

$81 - $250







Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in North West Melbourne

based on 42 reviews



What is Airtasker?


Post your task

Post your task

Tell us what you need, it's FREE to post.


Review offers

Review offers

Get offers from trusted Taskers and view profiles.


Get it done

Get it done

Choose the right person for your task and get it done.

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in North West Melbourne

Hook up hot water system


Sunbury VIC, Australia

6th Sep 2022

Hi I need a hot water system hooked up to a bungalow. I have put the pictures underneath. My brother has built it and said it’s ready to be attached and everything is set up. Can be done on weekends, or weekday just have to organise it.

Help moving Gas Hot water system


Meadow Heights VIC, Australia

30th Aug 2022

HI I need help Gas plumber to move existing gas hot water system from current location to different location (around the corner) as we are putting decking need to be done by 31st August 2022 - Due date: Needs to be done on Wednesday, 31 August 2022

Hot water not working


Roxburgh Park VIC, Australia

19th Aug 2022

the hot water all of a sudden stopped working - Due date: Flexible

Replace hot water service 25 litter electric


Glenroy VIC, Australia

27th Jul 2022

Replace old 25ltr electric hot water service to new one and I will supply new electric hot water service - Due date: Flexible

Burst Pipe between the 2 Solar Hot Water Panels o


Craigieburn VIC, Australia

20th Jul 2022

There is a leakage in the connecting pipe in o ne of the Solar Hot Water Panels on the roof which need to be fixed. Single available. - Due date: Flexible

Great job. Prompt response.

Plumber - Solar hot water by pass solar panel


Oak Park VIC, Australia

1st Jul 2022

Plumber required. Currently solar hot water frost valve leaks badly in the cold morning days. Please help me to do reconnection to by pass the solar panel. It's a double story townhouse. ACCESS VIA LADDER ONLY FROM GROUND. The solar panel and booster is on the roof. Thank you very much for viewing. - Due date: Flexible

Hot water unit


Glenroy VIC, Australia

5th Jun 2022

need a plumber to remove a old hot water unit (gas) and install a new instantaneous 26 unit - needs to be done by a qualified plumber as we need a cert - supply and install please

easy transaction

Heat pump hot water system supply and install


Keilor East VIC 3033, Australia

6th Sep 2022

Heat pump hot water system supply and install

Fix my unreliable hot water system.


Sunbury, VIC

29th Aug 2022

Intermittent and unreliable hot water system (especially during cold mornings and at night time). The main issue is in my bathroom shower. May possibly need a unit replacement. The last plumber I had was not able to fix the problem. - Due date: Flexible

Joolca hot water system on a dog grooming trailer


Avondale Heights VIC, Australia

14th Aug 2022

Joolca hot water system , igniting but no flame . - Due date: Needs to be done on Monday, 15 August 2022

Fix Hot Water System


Roxburgh Park VIC 3064, Australia

21st Jul 2022

I have Rinnai Solar 26 Gas boosted Hot Water System. A plumber removed Valve thinking it is faulty but later on it was tested and found working. But now that plumber is overseas and I need to reconnect that valve. I am adding some pictures for reference and clarity. Task: 1) Connect Valve to HWS - Due date: Flexible

Solar Panel removal (hot water system)


Craigieburn VIC, Australia

18th Jul 2022

Need someone qualified to remove hot water system solar panel from my roof and take it down, and disconnect all water connection to that panel , pictures are from neighbour property but i have similar panel - Due date: Flexible

Recommended 100%

Re-plumb hot water service gas inlet


Brunswick VIC 3056, Australia

24th Jun 2022

Currently main supply line is connected to a common line that services both the outdoor hws as well is gas heaters inside. We are decommissioning these heaters so want the hws plumbed directly into the main line instead. Must have relevant qualifications.

Hot water unit repair


Greenvale VIC 3059, Australia

23rd Sep 2022

The house hot water unit is playing up. Hot water lasts for about 40 seconds and then goes cold again. The system has a tank. Property is located in Truganina and requires urgent attention.

Hot water repair - water not enough hot


Craigieburn VIC, Australia

31st Aug 2022

Takes longer for water to get hot but still not hot enough Price negotiable - Due date: Needs to be done on Friday, 2 September 2022

Rheem electric hot water system not working


Oak Park VIC, Australia

24th Aug 2022

Electric Rheem Hot Water System not working. Need someone to come an check it out today. - Due date: Before Wednesday, 24 August 2022

Kade was very professional and although the hot water system wasn’t the issue he fixed what was required.

Modify hot water system


Greenvale VIC, Australia

27th Jul 2022

- Inspect existing hot water system (Rinnai Solar 20) - Existing 175L tank has a leak - Check for option to connect the water supply directly to the gas booster. - Tank to be replaced once checked - Qualified trade required - Due date: Needs to be done on Saturday, 30 July 2022

Replacing a solar panel for a hot water system


Greenvale VIC, Australia

21st Jul 2022

Our hot water system solar panel ave burst yesterday because of the frosting weather, I need a replacement asap. Will accept a reasonable offer . - Due date: Needs to be done on Friday, 22 July 2022

Solar hot water leakage


Roxburgh Park VIC 3064, Australia

11th Jul 2022

There is a leakage from the frost valve attached to solar panel on the roof. The water keeps on flowing out of the frost valve. The issue only started yesterday and it was fine before. - Due date: Needs to be done on Monday, 11 July 2022

Hot water system not working


Craigieburn VIC, Australia

21st Jun 2022

My hot water system is not working, need a hot water plumber to come and fix.