Find a professional hot water system contractor in North Sydney

Fill in a short form and get free quotes for local hot water system contractors in North Sydney


Excellent rating - 4.5/5 (9200+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
Up to 50% cheaper than franchise dealers
No job too big or too small
No job too big or too small
Free insurance coverage
Free insurance coverage
Secure cashless payments
Secure cashless payments
Same day / next day service available
Same day / next day service available

Best rated Hot Water System Installers near me

Recent Hot Water System Installation & Repair reviews in North Sydney

"Charlie was lovely and very efficient. He did a great job of fixing & replacing my leaking pipes under my kitchen sink."

Plumber to fix leaking hot water tap under kitchen


"Job well done"

Replace electricity hot water system


"Completed the job without any fuss. Polite and good communication. Would definitely use him again."

Replace leaking valve on hot water system


"Great service, proactive with communication. Would recommend. "

Remove solar hot water from roof


"Excellent - prompt and efficient. "

Fix hot water


"Great job - super quick and efficient!"

Remove Hot Water tank in ceiling


What's the average cost of a Hot Water System Installer in North Sydney

$106 - $327







Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in North Sydney

based on 42 reviews



What is Airtasker?


Post your task

Post your task

Tell us what you need, it's FREE to post.


Review offers

Review offers

Get offers from trusted Taskers and view profiles.


Get it done

Get it done

Choose the right person for your task and get it done.

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in North Sydney

Plumber to change from electric hot water tank to gas


Mosman NSW, Australia

10th Sep 2022

I’d like to change from electric hot water system to gas continuous flow for my apartment. There’s already existing gas pipes. The current tank is underneath the kitchen bench in a cupboard. - Due date: Needs to be done on Thursday, 15 September 2022

Plumber needed - Hot water not working properly


Thornleigh NSW, Australia

22nd Aug 2022

Water is just warm but not hot. It is not at a high temperature and would not be hot enough to shower in or wash dishes. I looked at the gas system out the back and it has the number 50 written on it which I assume to be the temperature it should be heating to but it definitely wasn't 50 degrees coming out of the tap after letting water running for 3-5 minutes. Don’t know why, it may just be a thermostat reset or change that is needed. Please see enclosed pictures for details of the hot water system, it's gas powered. Please quote on the akob as a package price which includes everything (labour, airtask fee. etc) Need it fixed asap, Thanks!

Fast and efficient, he got the work done! Good job Cam.

Electrician - switch hot water rate


Wollstonecraft NSW, Australia

22nd Jul 2022

We need a level 2 qualified electrician to switch our hot water service from off peak 1 to off peak 2. - Due date: Before Saturday, 23 July 2022

A fantastic Airtasker. A true gentleman, excellent communication and service. Highly recommend.

Replace hot water unit


Neutral Bay NSW, Australia

16th Jun 2022

I need to replace hot water unit in my shop. - Due date: Flexible

Very professional, he did a good job. Thanks

Supply & install hot water temperature limiter


Wahroonga NSW, Australia

11th Apr 2022

With a young family we need to limit the temperature of the hot water from our taps to minimise the risk of scalding. Looking for someone to please supply and install the relevant valve to appropriately moderate the temperate.

Fix tap, the hot water tap is turning but it’s seems the tap is broken


Hornsby NSW, Australia

13th Mar 2022

The cold water tap is working fine but the hot water tap is loose. And when I turn it no water comes out. It was coming out the other day. Other taps in the unit is working both hot and cold - Due date: Flexible

Super fast speed work. Great explanation and very helpful and patient too. Highly recommended.

Plumber / gas hot water tradesman required


Gordon NSW, Australia

11th Nov 2021

Looking for someone to remove hot water tank from indoors and relocate, reconnect it to the other side of the wall (outdoors) please see photos attached with floor plan and annotated pictures.

Thank you very much James for doing a great job removing our indoor hot water unit and reinstalling it outside. Really appreciate everything!

Urgent: Fix leaking hot water system


Lane Cove NSW, Australia

7th Sep 2022

Leaking pipe attached to hot water system - Due date: Needs to be done by Thursday 8 September 2022

Move Hot Water Tank


Lane Cove West NSW, Australia

12th Aug 2022

Move a Rheem 315L hot water tank from Hunters Hill to Gladesville, flexible from today until next Friday 19/08 between 8am - 5pm. Height: 1.8 metres Width: 700mm Depth:400mm

Khalil was great to work with, on time and helpful. Thanks Khalil!

Looking for plumber to install electric hot water system


Lane Cove North NSW, Australia

20th Jul 2022

I am looking for plumber, to install the electric hot water system which locate inside cabinet in the kitchen. The water was leaking, the electric hot water system still has warranty but I need you to take the old tank out and I will take it to the company to swap the new one, and you install it. Thank you - Due date: Flexible

Supply & install hot water temperature limiter


Wahroonga NSW, Australia

1st May 2022

With a young family we need to limit the temperature of the hot water from our taps to minimise the risk of scalding. Looking for someone to please supply and install the relevant valve to appropriately moderate the temperate. Photos of heater tank attached.

Geoff was excellent, will use him again!

No hot water on Breville coffee machine


Cammeray NSW 2062, Australia

5th Apr 2022

Breville Barista Pro is not heating water so could be the thermostat, fuse or blockage. Have tried the cleaning cycles to no avail. - Due date: Flexible

Install hot water heater and remove old one


Lane Cove West NSW, Australia

20th Feb 2022

We have purchased a new hot water heater. Need someone to install it and take away the old hot water heater. New heater is a 125L Rinnai storage system that is replacing a smaller storage system. - Due date: Before Saturday, 5th Mar 2022

Mark was great. He gave great advice and then had to deal with a more complicated job than we realised when he arrived. Really appreciate the time he took to make everything work in the end!

Check and fix hot water system


Mosman NSW, Australia

16th Sep 2022

Hot water system making a rumbling sound. becomes louder and more quiet - Due date: Needs to be done on Friday, 16 September 2022

Install Changeover Switch for Hot Water System.


North Turramurra NSW 2074, Australia

3rd Sep 2022

Currently our 250l HWS i linked to a dedicated off peak circuit. We would like it also connected to one of 3 existing normal peak circuits with a switch to be able to switch from off peak to normal. This will allow us to cater for occasions where family and friends are staying over. One of the 3 peak circuits looks like very little is connected to it given power use on it is very low. Current power supply is 100amp 3 phase. Someone suggests a Clipsal 4PS25CO Changeover Switch is what is required. - Due date: Flexible

Zee did a great job. On time and efficient in his work. He was also able to resolve another 2 electrical issues I put to him without asking for additional payment. Saved me a lot of money. I would be happy to recommend Zee and took his business card for any future works.

Install hot water system


Hornsby NSW, Australia

22nd Jul 2022

current rheem 50liter hot water system is faulty need to take this off from unit and replace with a brand new dux 50 liter hot water electrical system. same place .we can help on as well. I will provide the new DUX hot water system tank. brand new in box. - Due date: Flexible

professional nice tech. highly recommended!!!

Connect continuous gas hot water


Killara NSW, Australia

24th Jun 2022

Install a continuous gas hot water system. Gas line and power supply alongside. Must be licensed.

Plumber needed for hot water issue in granny flat


Warrawee NSW 2074, Australia

25th Apr 2022

Hi, We need a plumber to investigate why the hot water has stopped in our granny flat. We don't know much about how it was originally plumbed so some exploration may be required.

Giovanni immediately found our plumbing issue and patiently explained and demonstrated the options to resolve it. Will use again for future work. Thanks!

Fix gas hot water heater


Mosman NSW, Australia

19th Mar 2022

Our gas hot water heater isn’t working. We think the pilot light has gone out and the igniter isn’t working

Super quick and very helpful to resolve the issue

Kitchen sink has no hot water. Solar with gas boosted system.


East Killara NSW, Australia

11th Feb 2022

Kitchen sink has no hot water in a house built on 2005. The hot water system is solar with gas boosted system. There is hot water throughout the house but not the kitchen. It's hot briefly, like 2 mins, then turns cold. Please quote the price for fixing it. - Due date: Flexible

Effective assessment of the issue and has resolved hot water as well as water pressure without needing to replace hot water system.