Find a professional hot water system contractor in East Brisbane

Fill in a short form and get free quotes for local hot water system contractors in East Brisbane


Excellent rating - 4.5/5 (9200+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
Up to 50% cheaper than franchise dealers
No job too big or too small
No job too big or too small
Free insurance coverage
Free insurance coverage
Secure cashless payments
Secure cashless payments
Same day / next day service available
Same day / next day service available

Best rated Hot Water System Installers near me

Recent Hot Water System Installation & Repair reviews in East Brisbane

"Thankyou Cody! Cody was on time, efficient and very friendly! Will use him again and 100% recommend him!"

Electrician needed for hot water wiring


"Went to Bunnings to purchase additional materials and went out of his way to fix the problem. Very friendly, polite and will use his services again. Highly recommened..Thanks again. "

Hot water tap washer replaced


"Thanks all done "

Fix leak in Hot Water tank


"Fantastic service! 5 stars! "

Hot water system picked up and dumped TODAY


"Excellent Service and very polite and friendly, will highly recommend to others and will use his services again. Thanks so much Paul for coming after hours. Kindest Regards "

Plumber to Fix leaking hot water tap


"Excellent! Thanks Nick! Best electrician we have ever used."

Licenced electrician for hot water system


What's the average cost of a Hot Water System Installer in East Brisbane

$75 - $215







Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in East Brisbane

based on 16 reviews



What is Airtasker?


Post your task

Post your task

Tell us what you need, it's FREE to post.


Review offers

Review offers

Get offers from trusted Taskers and view profiles.


Get it done

Get it done

Choose the right person for your task and get it done.

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in East Brisbane

Install bathroom heater, plus floodlights, check hot water element


Birkdale QLD 4159, Australia

13th Apr 2022

An electrician is needed to install a 3-in-1 bathroom heater/fan, plus two floodlights & check the hot water system element. I have the 3-in-1 bathroom heater/fan and floodlights. I don't have the hot water system element if it needs changing it will have to be purchased & supplied. It is a Rheem hot water system. I look forward to hearing from you. Damian - Due date: Flexible

Repair hot water mixer BOSCH Gas system


Victoria Point QLD, Australia

24th Jan 2022

2 shower tempature mixers not working. Either Hot or Cold. BOSCH system. - Due date: Flexible

Nick was exceptional. Arrived on time as organised, communicated what had to be done amd finished the task in timely manner. Will be recommending to all.

Sealing basins and hot water to garage laundry


Victoria Point QLD, Australia

14th Oct 2021

Sorry had repost - I need a quote for the following:- 2 x basins and shower drains reseal Laundry basin in the garage doesn’t have any hot water only cold water so have only been able to wash clothing in washing machine with cold water. Has hot and cold taps but no hot water comes through? Must be a licensed plumber.

Shower Washer for hot water tap needs replacing


Tingalpa QLD, Australia

1st Jul 2021

Our Hot water tap for the shower is causing our shower to drip as it needs the washer replaced, currently dripping water, and would like someone to come and fix it today if possible. Two ppl at home currently but will social distance and be wearing masks due to COVID we will be available in other areas of the house otherwise will leave you to it.

Awesome service, fast, friendly and polite, came same day within 3 hours from posting the task and went to Bunnings and went above and beyond the task. Thanks heaps Cam. Will definitely recommend to others and will request again.

Electric hot water storage tank leaking


Redland Bay QLD, Australia

24th Mar 2021

Possibly the pressure relief valve.

I need hot water system installation


Tingalpa QLD, Australia

26th Nov 2020

I need a 1997 125Litre rheem gas hot water system removed and a chromagen170litre heat pump installed. Please provide quotes.

Replace solar hot water panel


Redland Bay QLD, Australia

1st Oct 2020

I need to replace a damaged hot water solar panel with a second hand one that I have. Job will require removal of glycol, removal of ild panel from roof, install replacement panel, refill with the glycol previously removed, check and test for leaks. I am available to help if requested.

Hot water system leaking + water hammering


Wynnum West QLD 4178, Australia

15th Feb 2022

Plumbing issues. Hot water system is leaking. Plus fix additional water hammering issue. Not sure how much it would cost so please put your quote out.

Low hot water pressure. Need tempvalve replaced


Birkdale QLD 4159, Australia

27th Dec 2021

Need plumber to check why low water pressure is occuring. Replaced aerators on taps still no fix. Possible temp valve replacement to resolve issue.

Pick up 6 250L hot water service


Wakerley QLD, Australia

25th Aug 2021

Pick up 6 250l quantum hot water services, can be sold or for scrap metal All hot water services still work

Great service

Hot Water system


Thorneside QLD, Australia

17th May 2021

My hot water system isn’t heating up properly can somebody help

4 yr old Vulcan electric hot water system not work


Cleveland QLD 4163, Australia

13th Mar 2021

4 to 5 yr old vulcan electric hot water system not working. Circuit breaker tripped

Fix leaking hot water cylinder


Alexandra Hills, Queensland, Australia

28th Oct 2020

Hot water cylinder leaking. Needs to be fixed asap.

Plumber to fix a leaking from the hot water system.


Wynnum West QLD, Australia

10th Jun 2022

Leaking under the electric panel. May need o replace the heating element or the rubber seal around it. - Due date: Before Saturday, 11 June 2022

Repair hot water mixer in 2 showers. Bosch system.


Thornlands QLD, Australia

24th Jan 2022

both showers neared heated by bosch gas hot water. Currently only too hot and cold.

Add a wifi circuit breaker/timer to control hot water service


Victoria Point QLD 4165, Australia

24th Dec 2021

add a wifi circuit breaker/timer to control hot water service - Due date: Flexible

Wire electric hot water to 24/7 grid


Ormiston QLD, Australia

12th Jul 2021

I have electric hot water connected to off peak grid at the moment. I am looking at wire it in the 24/7 grid (and remove off peak meter) to make use of solar panel.

Hot water system tripping (solar)


Tingalpa QLD, Australia

11th May 2021

Hot water off peak switch has tripped and can’t reset.

New heat thermostat for gas hot water system


Capalaba QLD, Australia

28th Dec 2020

The hot water is no longer working on my gas hot water system which I think needs a new heat thermostat or something. Can someone please help? It's a Bosch highflow 17e.

Prompt response and very helpful. Thank you

Gas hot water swap to electric hot water


Gumdale QLD 4154, Australia

21st Oct 2020

1. Swap existing gas (Natural Gas) hot water system to an electric hot water system (Rheem 315 litre Twin Element). Electrical cable and new circuit will need to be installed to switchboard. Also needs to be on power saving tariff. 2. Can you also quote installing gas bottles which will feed to my gas bayonet fitting (BBQ). 3. Please quote supply (Rheem 315 litre Twin Element) and install and install only.