Find professional local plasterers in Outer South West Sydney

Scope of work: -installation of following partition walls: 1. 6m x 3.4 m 2. 2.1m x 3.4m 3. 1.6m x 3.4m 1. -installation of partition wall using 90mm metal stud/track ( width of the wall is going to be approximately 320mm, to be confirmed with the client ) -installation of decorative arches x 2 (measurements are to be confirmed with the client, approximately 1.2m x 2.4m openings) -additional opening will be left for fire hose reel and fire extinguisher -lining of the wall with 10mm plasterboard 2. -installation of partition wall using 90mm metal stud/track with 1 decorative arch opening ( width of the wall is approximately 150mm) -installation of supporting timber on both sides of the arch opening -lining of the wall with 10mm plasterboard 3. -installation of partition wall using 90mm metal stud/track with 1 decorative arch opening ( width of the wall is approximately 150mm) -installation of supporting timber on both sides of the arch opening -lining of the wall with 10mm plasterboard -plastering -sanding( ready to paint) Please look at digital designs for understanding.

I need 6 gyprock patches fixed. I need them to be scraped, plastered, dry over night, then sanded the next day. Leveled with wall and paint ready. 5 patches approx 20cm x 20cm 1 patch 2m x 0.5m I fixed the patches myself even applied one coat of paint. However I didn’t like the finishing. So need someone to do it professionally. I have more work similar to this that we can discuss once this is done. Thanks

2 x sheets of gyprock and cornice installed into laundry ceiling area. Ceiling dimensions: 1350mm wide x 5000mm long, I can assist with lifting sheets if required, should be only 2 hours work.

Need hole in wall fixed and painted

Looking for an experienced gyprock/plasterer to supply all materials and complete this job from start to finish. Scope of works: Supply and install Gyprock/plasterboard to the exposed insulated wall sections. Existing metal stud framing is already installed. Adjust/straighten a few metal studs where required so the plasterboard sits flat. Install external corner beads to all exposed corners. Tape, set, stop up and sand all joints, screws and corners to a smooth, paint-ready finish. Prime and paint the newly sheeted walls and paint the existing black wall white so everything matches. Wall sections to be sheeted (all 2.67 m high): 180 mm wide 600 mm wide 650 mm wide 3.30 m wide Total Gyprock area: Approximately 12.6 m² Notes: Please supply all materials, including Gyprock, corner bead, screws, compound, tape, primer and white paint. Photos are attached showing the wall and the sections to be sheeted. Looking for a neat, professional finish ready to use once painted.

The hole is approximately 56cm in length x 21cm in height. Need it repaired + sanded

Remove & Install New Toilet Ceiling 2.5 m x 1.8 I need an experienced plasterer or handyman to: * Remove the existing ceiling in a small toilet. * Supply and install a new ceiling sheet * Tape, set, sand, and finish all joints so the ceiling is ready for painting. Clean the rubbish and chuck in the bin which I will provide it. Painting is NOT required.

Have 2 holes in walls and 1 in a door that need fixing

Patch up a few holes and sand ready to paint

Wall needing plastering, it’s roughly 50cm by 25cm. Please keep it affordable.

Looking for an experienced gyprocker/plasterer to patch and finish the gyprock around 11 newly installed windows and a sliding door (see photos). The old trims have been removed and the openings need to be repaired and finished ready for painting. Please provide a quote and your availability.

Plasterboard is damaged on my living room wall.

Wall plastering, repair and paint

Need small amount gyprocking done, preference given to asap. See pics - but around cupboard doors (inside and out) Around new door installed inside walk in wardrobe - both sides Plus some small holes around house Location Moss Vale thanks

pls quote for ziprock work for a new build granny flat in minto

Plaster and paint a flat in my house.

Looking for an experienced handyman or AV installer to securely wall-mount a 75-inch TV in my living room. Please note: I do not have a bracket, so you will need to supply a suitable heavy-duty wall mount as part of your offer. ​Job Details: ​TV Size: 75-inch. ​Wall Type: Plasterboard / Gyprock wall with hidden timber studs. ​Bracket Needed: Installer to supply. I prefer a heavy-duty tilting mount suitable for a standard 75" television. ​Location: Leumeah, NSW. Ground-floor access with parking available. ​Timing: Flexible, looking to get this done sometime soon. ​Requirements: ​Must supply a quality, heavy-duty wall mount kit with all necessary lag bolts/hardware. ​Must bring an electronic stud finder to locate the exact center of the timber studs (the TV must be securely bolted into the timber frame behind the plasterboard). ​Must bring a spirit level to ensure a perfectly straight finish. ​Note: Because it’s a large 75" panel, I am happy to assist you with the heavy lifting when it's time to hang the screen onto the wall plate, so you don't need to bring a second person.

Need replace 2 roof drywall panel.

Looking for an experienced plasterer to help with a small residential job in Bradbury on either Tuesday or Wednesday next week for at least 6 hours. Please quote for time and if it goes over, we'll arrange accordingly. Tasks include patching, setting, and sanding. All materials on site – just need labour and tools. Job is at a private home with easy access and parking.

Gyprock holes to be filled sanded and wall to be painted .. the wall has been mixed with white paint with grey to make the wall look light blue colour match is needed I want a price to complete the job not extras Holes also where the Mount bracket is