Find a professional paving contractor in Hampton

Fix pavers around pool (14 years old), some have come loose, repair mortar between pavers. - Due date: Before Saturday, 18 March 2023

Need someone with a stone cutter machine to cut 1 x concrete paver to size and also cut a small hole so I can take it in and out or the pool filter access point, should only take 10 mins. The tile does not need to be installed, just cut as per below. It’s currently 40cmx40cm and needs to be cut to 40cmx35cm. So needs 5cm taken off one side. Thickness is 4cm. Can be completed today, tomorrow, Monday or Tuesday

Need to concrete and/or lay pavers over garden beds - Due date: Flexible

*** NO HELP LIFTING CAN BE PROVIDED *** Removal and disposal (by you) of 3 heavy pavers. Approx 750mm x 350mm (as per photos) 2 Man lift (in my opinion) Approx 15 metres from vehicle access (driveway) *** NO HELP LIFTING CAN BE PROVIDED *** - Due date: Needs to be done on Monday, 17 October 2022

Pave an area of 13sqm in my backyard. The bricks have been sourced. - Due date: Flexible

Lay pavers in front garden around gate installed area; lay small rocks and ten barks ect for the designated area

A section of our side path currently comprises 3 concrete pavers sitting directly on the soil surrounded by loose river pebbles. - currently removed. Want to properly place the pavers on mortar bed. I can replace the stones aferwards - Due date: Flexible

Removing, levelling and relaying a section of 5.5 x 3 metres of brick pavers. Involves cutting some to fill gaps. Lay on sand, which we have.

The driveway is approx 5m long x 3 metres wide. I am looking at using bluestone pavers of dimensions 1000mm x 500mm wide x 30mm deep laid in 500mm strips, with approx 300mm gaps between strips, where lawn will be grown (I will arrange lawn). The bluestone needs to be laid on a foundation suitable for a car. - Due date: Flexible

We are looking for an experienced paver/landscaper to lay 50 meters of pavers for garden bed edging. Details: - 200 x 100 x 40 pavers - trenches already dug - sand and cement on site Task: - run string lines / levels - lay pavers with mortar mix Required asap. Please message to discuss details, availability and hourly rate/set price

Everything supplied. Need someone with experience grouting pavers. 30ph

Pave 3m x1m. easy quick job.

Hello Taskers, i have what i believe is a relatively small paving job that i see taking about 1 - 3 days of work. I require the current paving (40 *40 Size) to be taken out, the base under leveled properly and then the paving re installed. Adding to this is need to cut approximately 4 pavers to allow a proper drain to be installed. The working area has good access and we have plenty of space to store the pavers as the levelling of the base occurs.

4 existing pavers (currently sitting in ground) to be releveled and pebbles concreted around pavers

Remove 12 x concrete pavers, 500mmx500mm, from an existing design, to a location 2m away, and lay on the surface in a different pattern. No need to make a foundation. Just need your muscle power and some digging. Remove the sand and crushed rock layer to a depth of 25 cm under 2 x 1 m squares of removed pavers (8), making 2 x 1 metre squares into which plants can be planted. Top up with soil from nearby. Sand and rubbish to be bagged. Nice retired couple in Hampton who can't do the heavy lifting and digging ourselves but will work with you. See picture. One lifted paver shows the sand etc underneath, to be moved to under the bench in the background. Some levelling required, but visual is good enough. Just digging. Estimate four hours work at $30 per hour.

Appx 10sqm, with easy access beside driveway. Need to clear and built base with gravel/ sand and then place pavers. I will provide pavers according to your measurements. Excess dirt needs to be removed from property. Will put a nominal price but expect a site visit may be needed, though I'm of course happy to answer any questions. Ready to start any time, though there will be a lead time on pavers.

Moving a small water feature 2m away. Firstly 2x400x800 stone slabs have to be placed on consolidated stone base, then bedded into a little sand bringing to horizontal. Please provide a bucket of sand. We have unlimited gravel and stones already available. The square base (600x600x300h) is then to be placed on top of the slabs and then the concrete urn 500mm in diameter is then placed on top of the sq base. You are to use the supplied plastic wedges that can be inserted under the urn to ensue the urn is true level. Test on completion. Est. time to complete 30mins. Additionally there are 7 stone slabs in the side walkway (see photo) where tree roots or general subsidence have resulted in these slabs now being quite obviously out of level. You are to lift each of these, adze away the offending root or whatever the issue and re bed by hand till approx level. This is a very low traffic area so just looking for a simple, practical solution. Est time 2hrs. Moving the small water feature has to be completed by Mon 1st March, the walkway not critical by then

Smallish job cutting about 15-20 pavers over 3sqm. I’ve done all the prep work and just need someone to help make some cuts for me. Should be 2 hours work I reckon

Extend an existing concrete slab. Lay tiles on top of existing slab and tiles.

Approximately 20 square metres of paving. Level ground. Bricks and square pavers.