Find an experienced paint stripping expert in NSW

I have a garage that is measured at 6.5m by 5.5m that I would like to have the paint stripped back to its original concrete state. There are patches of it that have been done but just need the overall surface to look the same as the original concrete state.

Repair damage done to my work car, all damage is to the bumper panel. The outer wheel arch of the front right has paint missing and theres scratches forward of that.

Apply paint stripper - peel away system 8 to the front of the house. Put laminated sheets over once applied. Protect floor while applying. Come back in three days time, peel / scrape off and put in bags and put into the bin.

I’m looking to transform my partners outdoor area that includes a laundry. The job will require removing of the washing machine and dryer and also the sink as it will be replaced with a new one, scraping off old paint from the concrete floor, waterproofing, and applying epoxy to the floor (includes a few steps).

I need professional help to remove paint and sand the ceiling in a room sized 2.8m x 3.2m, and get to a stage that I can apply primer and repaint the ceiling. Details and photos are included in the attachment. I previously attempted to strip the paint using a thick layer of paint remover, but it seems the job requires someone with more experience and the right tools. Please ignore the listed budget and provide a quote for what you believe is a fair price for the job.

Ok, I need some help. I live in a unit which is nearly 100 years old & still has the original brick fireplace. The fireplace has been painted over & I would like to strip it back to bare brick & mortar. I had a little test go over the weekend as I firstly wanted to see what the brick work looked like, & the process wasn’t complex, it was just that a process. I applied a paint removing solution, left for 1 hour, scrapped / wire brushed off, & repeated. I would say it has been 10-15 years since it was last painted but there may be 3 or 4 layers of paint? Dimensions: FRONT: 1.65m Wide / 95cm Height SIDES (each): 48cm Wide / 95cm Height *Paint does not need to be removed from the fire place cavity itself (which measures 60cm x 60cm) as it will later have a heater installed. Items which you may need to have / provide? - Drop sheet to lay on & protect carpet around the area - Some wide masking tape or painters’ tape to tape the skirting board at the bottom & mantle at the top. Both the skirting board & mantle will be painted at some point so I am not overly concerned about those areas - Gloves - Face mask - Wire brushes - Metal paint scraper - Product to remove the paint I can be fleixible with when the task is completed but it would need to be during the week (Mon-Fri) & not in the evenings, or before 8.00am as I have 2 little people which would just get in the way.

I have tried to strip paint off the brickwork in the interior of my fireplace and it has (partially) worked. I would like the remaining paint removed and then the brickwork to be cleaned and minor repointing where required.

Looking to have the black dots removed from the rail either paint the top rail or find a way to remove the black dot paint

Remove paint from wall. Side walls may be lead. We believe the main front wall is not lead. The wall is about 3.5m by 2.5m high.

Remove the paint on the door

Paint has been sprayed on the glass internally of every window in the house. It needs to be removed with a razor scraping tool. I will pay an hourly rate.

Stripping of paint from rippled tiles in a small bathroom approx 2 x 1m. Half room has been attempted but is taking a long time and the fumes are difficult.

Need to strip paint (water soluble) off warehouse floor. Surface area is roughly 6.5 x 4m

Removing as much paint of 2 walls within sunroom. They are brick walls that will stay as exposed once completed. Would like it done asap. We will supply all material's/equipment. Start Immediately.

We have 3 internal brick walls that have been painted and we’re after EOI’s or quotes to remove the paint, bringing it back to the original state. Paint from the wooden door and window frames to be removed also. Rooms will be empty for the job.

This is chipping and flaky paint, can be done with a pressure washer or concrete grinder. Total area is less than 35sqm

Strip paint and sand doors ready to be installed. Finish to be raw timber 2 x double doors (glass) 1 x internal doors

Clean back to concrete for resealing and painting

Finding someone who can safely remove lead paint in house

Strip white paint off windows and window frames on the inside only to reveal the timber below. Sand the windows and window frames