Find an experienced fence painter in QLD

Paint back fence - it’s an old fence that we have painted ourselves but we need it freshened up before we put our house on the market. Doesn’t need primer or anything like that. We already have the paint. Just time poor and don’t have the time to go over it ourselves.

125 square meters of Boundary fence painted with brush and roller not spayed. we will apply the paint?

Looking for an experienced painter to paint Timber fence. Colour is Surfmist Below are all measurements: Front fence and gate. 3.5m x 1.8m Left hand boundary fence. 17.5M x 1.7M and 18.5m x 1.2m. Rear boundary fence. 20m x 1.8m Right hand boundary fence to existing colourbond fence 12.5m x 1.8m

High pressure wash and Paint fence

Paint 25 x 1.8 metres of timber fence paint supplied

Need fence pant inside and out.

Pine timber Fence painting required for a new build. Surfaces have been prepped; Filled, Sanded and Deep cleaned. Painting have been started but I need help finishing. Paint will be supplied.

Fence approximately 12 meters long and the height is between 1500-1900 as it drops down.

Hi all, I have a wooden fence I am hoping to have painted. I gave it a pressure wash a few months ago. I presume there is some prep work involved. I am looking for someone who can supply materials and paint and paint it for me. I am thinking the dark grey "monument" colour but am open to suggestion. Keen to hear what might be involved and have someone do it for me. Please and thanks. Measurements in photos. I am in a townhouse so its just the one side/my side 😊

Updated - I have had a go of the fence as hired a sprayer - however I am reaching the tricky bit right next to house am needs someone with experience- I have hand painted the tops of the entire fence (70metres left to go)

30 Aud / hour. Full da or even two days (Monday & TuesdaY) of work if you are keen. Paint the timber fence with the roller, Clean the windows, paint the frames. Materiały provided

Front fence needs a new coat of paint. We will supply the paint. You just need to supply your own rollers thanks. There is about 80m of fence, you're just painting the composit fence, not the rails on top. Job will require cutting in round the rails with a brush, then the composit panels and posts can be rollered. No prep required except a light dust off and washing off any bird poop. Flexible on timing, anytime over the holidays will be fine.

Hello - I have 2 side fences (pine wood) 32m each which I need painted. I have paint and paint sprayer.

Looking to get the back fence painted and existing corrugated metal water tank to match. Fence is: 25m in length x 1.8m high Good access. Preferred method is spray to both fence and water tank, but not compulsory. Allow for 2 coats to both. Prepare fence as required to take paint. Paint supplied

Spray Paint Hardwood Fence Supply and Install Colour: Monument Fence Height: 1.8m Fence Lengh (from all sides): 60m Paint requirement: Prime Coat x 1 Paint Coat x 2

We have had a new dividing fence built and it needs to sealed/painted.

We have about 60m of fence that requires painting - dark grey. We will provide the paint.

Super simple fence painting. Roughly 10m left on internal portion. 40m of outer portion of fence that needs a coat as well. We will supply all the paint and brushes, rollers etc

Paint the fence white at the rear of the house and a small set of stairs. Was predominantly spray painted when originally done from memory 5 years ago.

Need to trim up fence for it to be prepared for painting