Find a professional mobile motorcycle mechanic near you

Replace my cv joints in my ford territory ghia 2005 Front left and front right

I need a mobile mechanic ASAP for my Renault Kangoo 2006 Van. May have issue with bush or linkage control. Van is currently in a Gas Station Parking lot.

Alternator failure…….,..,

Help Needed with Transmission Removal & Rear Main Seal Replacement – 2000 Toyota Echo Looking for an experienced mechanic or someone with good mechanical knowledge to help finish a rear main seal replacement on a 2000 Toyota Echo automatic. Most of the preparation work has already been completed. Everything has been disconnected from the transmission, the subframe has been removed, and I’ve started removing the transmission. However, the engine is currently supported by a hydraulic jack, which isn’t providing adequate support and is causing the engine to sag. I suspect this is making it difficult to remove the transmission. What I need help with: * Bring a suitable engine support bar and potentially tall 3–4 tonne jack stands. * Properly support and stabilise the engine. * Help remove the transmission. * Remove the drive plate and inspect the crankshaft/sealing surface. * Replace the rear main seal. * Reinstall the drive plate and transmission. What’s already done: * Transmission components disconnected. * Subframe removed. * Transmission removal started. * No need to reinstall the subframe or other removed components. I’m looking for someone with experience working on automatic transmissions who has the appropriate equipment and can help complete this stage of the repair safely. Please let me know your experience, availability and whether you have the necessary equipment.

My car hit a traffic island & lost fluid from underneath the passenger side (front of the car) since then it starts, however will not change into any gear ( it is automatic) revs when foot is on gas pedal however the car will not move at all! I need a diagnosis and report to know what is wrong with my vehicle please. Audi A3 2004 auto hatchback. Thank you

Hi, I am looking for a mobile mechanic in Newcastle to help with my car. The car is already jacked up with the wheel removed. The tie rod lock nut has been backed off, but the outer tie rod end is completely seized on the inner tie rod threads due to rust and lacks working space.

Mobile mechanic Car not starting

Looking for an experienced mobile motorcycle mechanic to diagnose and repair my 2017 Suzuki DR650 at my home in Buderim. After a solid day of riding yesterday, towards the end of the day the bike initially idled normally but bogged down and stalled when opening the throttle. It subsequently stopped starting altogether. What’s been checked: • RACQ attended and suspected a carburettor issue. • The bike recently ran out of fuel. Possible sediment affecting the carburettor’s float/needle valve or blocking fuel passages was suggested, but this hasn’t been confirmed. • The 25-litre Acerbis tank has since been filled, which didn’t resolve the issue. • The battery is now flat from repeated starting attempts. It was turning the engine over before becoming depleted. • The idle-speed adjuster was moved during troubleshooting and may need resetting. I need someone to check fuel delivery, inspect and clean the carburettor as required, check the breather filter, and recharge/test the battery. Motorcycle carburettor experience is essential. Experience with Suzuki DR650s is a bonus. Please bring suitable tools and battery charging or jump-start equipment. In your offer, include your relevant experience, earliest availability and what your price covers. Please identify any additional parts or labour costs and obtain approval before proceeding.

Vehicle: 2006 Ford BF Fairmont MkII (NA Barra) Task: Basic engine-health upgrade & parts replacement Parts Supplied (all fluids provided + pans etc): • Aluminum radiator • New expansion tank • Silicone coolant hoses • Solid band ring clamps • Thermostat + gasket • Proflow trans cooler (braided lines) • Aeroflow Alternator & replacement plug • Drive belt • 2x cam sensors • Upgraded power steering line • Red/black OFC cables for overlay, copper lugs & fuse holder • SAAS throttle controller Note: I can remove front bumper before you arrive so you can avoid bodywork. Please have: • Trans fluid pump & OBD2 scanner for ZF temp check • Soldering iron (alternator plug) & hydraulic wire crimpers (lugs) I will provide the complete parts list & project brief via text once assigned. Please confirm your experience with the Barra platform and BA/BF chassis when offering. Cheers.

Crank sensor needs to be replaced

Need a licensed mechanic to do a pink slip for my car at my home in Five Dock. Must be authorised for eSafety checks and able to lodge online. Available today or tomorrow. Quote for inspection only.

My car seems to have a battery issue or possibly blown fuse problem as it is not starting. Need a mechanic to come have a look and fix possibly. Car is 2012 Toyota Vellfire

Hi i am buying a used mercedes GLC2021 from Dealership need expert in mercedes to throughly inspect the car before finalizing the deal.

Need someone to replace the bearings on my trailer. Bearings will be reimbursed. I already got two but not sure if they will fit.

I need a trade-qualified mobile mechanic to perform a pre-purchase inspection on a 2005 Toyota Yaris automatic hatchback in Woodridge/Logan Central, QLD. Ideally someone who can come today or tomorrow - the sooner the better! The vehicle has a current RWC, clean PPSR but the logbook is missing, and the throttle feels overly responsive. I am looking for a professional mechanic with their own tools and an OBD2 scanner to perform a thorough check against the following criteria: Engine & Underbody: Test for engine oil sludge/carbon build-up under the oil cap. Check for smoke on cold start, engine mounts, and visible fluid leaks (oil, coolant, transmission). Inspect suspension, CV joints, and wheel bearings. Electrical & Diagnostic: Conduct an OBD2 advanced diagnostic scan to check for hidden, pending, or recently cleared fault codes in the ECU/transmission. Test the air conditioning and basic electricals. Body & Paint: Assess the severe peeling paint for underlying rust or signs of hidden structural accident repairs/panel alignment issues. Extended Road Test: Evaluate engine performance (addressing the touchy acceleration), smooth transmission shifts, and brake performance. Please confirm you are a qualified mechanic when placing your offer.

Hi, I’m looking for a mobile mechanic or diesel mechanic to help fix an issue with my 2015 Toyota HiAce diesel van. I recently replaced the diesel fuel filter, reconnected everything and primed the system, but the van now won’t start. It initially started for a few seconds and then turned off. There appears to be a fuel leak coming from the outgoing fuel connection/fitting on the diesel filter housing when priming. I need someone to inspect it, fix the leak/connection issue, prime the system properly and get the van running again.

I will buy a van - Hyundai Iload , is there any chance after 4 pm ?

I’m looking for a mobile mechanic to inspect a 2012 Skoda Octavia Scout diesel wagon before buying. The car runs and drives, but the engine light is on and the battery is flat, so I need someone who can bring a diagnostic scan tool / OBD2 scanner to read the fault codes and give me a basic opinion on whether it looks like a minor issue or a major repair risk. I’m mainly after a general pre-purchase inspection and the engine light diagnosis. Please send your offer if you have a scanner and experience with European diesel cars.Thanks!

Need a mobile mechanic or tyre fitter to inspect a front wheel on a 2003 Mercedes SL55 AMG. The front tyre went flat after hitting a pothole and will not hold air. Roadside assistance was unable to inflate the tyre. I need someone to: Safely jack up the vehicle Remove the front wheel Inspect the tyre and rim for damage Check for a bent or cracked rim Advise whether the wheel is safe to fit a new tyre Vehicle is located at my home. This is an inspection only; no tyre fitting required so should be done in 30 minutes just remove the wheel inspect and then put back on.

get motor going, check timing