Find a professional roller shutter repair in West Melbourne

Looking for quotes for roller shutters on my house. House is single story. 5 x windows at the front of the house.

Need someone to supply and replace the roller shutter winder unit on my wall. The internal pin has snapped, so the entire winder box and handle mechanism needs replacing.

I have a roller shutter installed by Sunline Roller Shutters. Its a battery operated one. It sometimes works for a day or two, sometimes it wont work for an entire week. Ive had the battery replaced a year ago, not sure why it isn't working again.

Electric Roller shutter is not working.

the plate that rolls the window roller shutter is broken and needs fixing

One of our old manual roller shutters is stuck, looking for prices to fix it.

Roller shutter stuck. Has a motor but no way of dropping it. No internal control. Potentially faulty.

I have 3 window roller shutters which are not opening beyond a point. I've checked that the wire has rolled over itself and gets stuck . need some one to come in and help me get this fixed.

Roller shutters not closing making noise while attempting looks like it has stuck in the console

Window Size: Approx. 1800mm (Height) x 2400mm (Width). Location: Tarneit/Hoppers 3029 Roller shutter supply and install for front window, check photos. Share your quote. Any questions, please ask.

aluminium roller shutter won’t go up or down it might be stuck when I press the button it just makes noise

Roller shutter jammed and need help fixing it. When i turn the switch to on or off i could hear the motor running. However, i could hear the shutters getting stuck.

the handle of the mechanical window roller shutter is broken and the rail is hard to lift the window shutter in a bedroom ground floor.

Looking for an experienced handyman or blind/roller shutter technician to repair a cream aluminum window-style roller shutter used on a garage. The shutter motor is whirring and fully functional. I had to open it and slowly lower the shutters which resulted in partial snap of shutter as per photo. Scope of work includes: Inspecting and straightening/re-aligning the vertical side tracking channels where the jam occurred. Re-threading the detached bottom rail back onto the aluminum shutter curtain. Checking the side alignment clips (V-clips) on the lower slats to ensure smooth, level tracking. Testing the operation to ensure it glides up and down without binding. (If possible, this shutter does not have a remote, if you are able to help with this as well) Please see the attached photos showing the detached slat and the current state of the shutter.

We have just purchased a small unit that has three metal roller shutters, but none of them are working. Two of the shutters are up and won't come down, the third is down but won't come up (see images). They are remote controlled not hard wired. We're not sure what the issue is - looking for someone to get them working again.

Hi there, Our roller shutter motor might have broken, the shutter doesn’t roll up anymore. It was very loud for a while while going up and down then stopped altogether. Let me know what could be the issue and if you could fix it. Thank you.

The roller shutter from one of the windows is broken, it stopped halfway while shutting and the motor just kept going and the rest of the shutter just dropped to close. Now it remains totally closed and the motor just makes a sound when activated and stops after a certain time.

Roller shutter repair and maintenance

Title: Fix motorised security roller shutter (motor running but not lifting) Description: I have a motorised external security roller shutter that is not opening. - When I turn the wall switch, the motor can be heard running - However, the shutter does not move at all - The sound is different from my other shutters (sounds like it’s spinning freely) - I have 4 other shutters in the house and they are working fine This suggests a likely mechanical issue (e.g. broken or disconnected internal straps/clips or similar). The shutter is located externally on a single-storey house (easy access). What I need: - Diagnose the issue - Repair or replace any broken internal components (e.g. straps, clips, or mechanism) - Ensure shutter is working smoothly again Additional info: - Power supply is working (motor runs) - No visible external damage - Photos attached Looking for someone experienced with roller shutters.

Roller shutter not going up or down. Located outside . Window size is about 800nm w x 2000mm long