Find professional window and door services in ACT

My sliding door fly screen needs to be replaced. The mesh is black

Job Description – Garage Door Repair Needed My automatic garage door opens correctly but will not close properly. When pressing the close button on the remote, the door starts rolling down but then quickly reverses back up after moving a short distance. From inspection, it looks like the issue is coming from the bottom corner roller area, which may be sticking or misaligned. The corner panel also appears slightly misshaped, likely causing the door to bind. Please see the attached photo for reference. Work required: Inspect the corner roller and alignment. Adjust or replace the roller if necessary. Check and realign the corner panel. Ensure smooth and safe operation of the door after repair.

Need someone to reattach door to tracks.

Our garage door has a dent & scratch on it. When reversing a car, the bull bar dragged on the door. The dent & scratch is approx 1 meter long & 20cm high. We are hoping someone can push out the dent and repaint the scratch.

Recently bought a second floor apartment which has some minor rotting timber on the windowsill caused by extreme condensation. I have so far had multiple carpenters cancel jobs.

Need to replace the wheels on my sliding patio door - they are very noisy and the door does not slide smoothly.

Outdoor kitchen door replacement.

I stall 1x single panel lift door, brand new supplied And 1x double panel lift door brand new supplied

2 doors need shaving on bottom and area of past vertical lock needs resurfacing. 1 door frame needs trim refixed along with 2 lengths of skirting. 2 doors need painting. Luxaflex curtain/vertical blind needs repair.

Hi, I’m looking for a handy person to help me replace 10 door handles around my house. Door handles will be provided as shown. I'm flexible after business hours or anytime on weekends.

The wire that connects the handle of my garage door to the latch has snapped. I think it can be repaired with a new piece of wire attached to the existing wire but I don't have the wire, joiners or capability.

Swap door over to other side and hang on opposite door jam. No patchwork needed. Re-use existing hinges and striker etc Make me an offer!

2 wood doors needing slight shaping to stop them from sticking .

Sliding door has become stiff, might need new rollers.

(1) Front door has dropped, needs to be realigned (2)cavity door coming off the runner, difficult to move and not straight (3) install a pull handle on the cavity door

2 separate issues - possibly a handyman can fix. 2 bathroom vents loose, need them put back in. Lounge room sliding door keeps coming off hinge. The metal slider has come off the wall and needs to be put back on. Sliding door may or may not need new wheels.

Metal Door frame. Lock change, meaning old hole must be covered. Job requires cutting a metal patch and welding it onto the door frame. You will need to bring all supplies (including metal patch) Size: approx. 2cm x 4cm doesn't need to be perfect but needs to be fairly neat. i imagine it's fairly small job and shouldnt take very long, but will pay a good price for a good job. Located in Kingston

I have a screen door with some holes in it, I have bought the new screen and piping.

I am looking for someone to fix my glass shower screen door. It makes noise. Maybe need to change the hinges or adjusting them.

Hello, We are looking for a skilled handyman to repair and re-secure several loose door handles at our retail store, located in ACT - Tuggeranong. The Issue: We have three internal door handles (in our staff and pre-test rooms) that have become very loose and are pulling away from the doors. The screws appear to have failed or come loose, making the handles wobbly and at risk of falling off completely. The Job: The task is to re-secure all three door handles. This will likely involve: 1. Assessing the handle sets to determine the cause of the looseness. 2. Tightening all relevant grub screws and through-bolts. 3. If the screw holes in the door are stripped, you may need to use slightly larger screws or repair the holes to ensure a solid fixing. 4. Ensuring all three handles are firm, fully functional, and sit flush against the doors. Please see the attached photos for an example of the issue. Requirements: - You must have experience with installing and repairing door hardware. - You must have your own tools for the job (e.g., Allen keys, screwdrivers). - Ability to work neatly and professionally within a retail environment. - Public liability insurance is required. Location & Timing: + Location: South.Point Tuggeranong, Anketell St. &, Reed St N, Greenway ACT 2900 (exact location will be provided once the task is assigned). + When: This is a low-priority job, but we'd like it completed at your earliest convenience. Please state your availability in your offer. Please provide a quote for the complete job of fixing all three handles, inclusive of labour. Thank you.