Find a professional gate installation in SA

I want to install colorbond side gate. The total width is 2 meter so need single side gate and may require a panel.

I’m looking for an experienced and reliable handyman/locksmith to help with a few jobs at my home. The work involves: • Checking and fixing a minor electrical problem existing electronic front gate • Reviewing the front entrance and selected internal doors for suitable smart locks • Helping me choose and purchase the appropriate locks Budget: around $300 for labour. I will pay separately for the locks, replacement parts and other materials required.

I have a foot path 4.3 meter long and 1 meter wide that I want concreted - gray-cement exposed aggregate concrete surface

Replace 16 lineal metres and internal gate made of brush, with Good Neighbour style fence and gate with lock

We need x2 baby gates installed, one at the bottom of the stairs and the other at the top of the stairs. We also need x2 Vendline clothes airers installed in our laundry. They will need to be installed onto studs as they are very heavy and will be holding weight in wet clothes too.

Hi, I’m looking for an experienced roofer, roof leak specialist, building maintenance professional or suitably experienced handyman to investigate a small area of cracking on our ceiling and determine whether there is an underlying roof leak or moisture issue. The issue appeared following the wet winter. There is currently no water actively coming through the ceiling, but there is some cracking that I’d like properly investigated before repairing. Background: * We purchased the house approximately 2 years ago. * The roof tiles appear to have been recently re-done/coated before we purchased it. * There are no obvious broken or missing tiles. * We have had people inspect/access the roof, but the roof cavity/ceiling space has not yet been inspected. * We had roller shutters installed in September last year, involving electrical work. The electrician accessed the roof cavity, so I’d like this considered as a possible factor. * The ceiling is currently dry with no active water ingress. I’m not suggesting the roller-shutter installation caused the issue, but I’d like the cavity checked for any potential disturbance, penetrations or other possible entry points. What I need: * Inspect the affected ceiling and roof cavity. * Check the corresponding roof area for potential water entry points. * Look for signs of current or previous moisture. * Use a moisture meter if available. * Identify the likely cause/source, if possible. * Advise what repairs or further investigation may be required. * Provide an approximate cost to repair the small ceiling section once the cause is established. I’m not looking for someone to simply patch the crack — I want the potential cause investigated first. Budget: $100 for the initial inspection/diagnosis. Any repair work can be quoted separately once the cause is identified. Please only offer if you have relevant experience with roof leaks, moisture investigation, roof cavities or ceiling repairs.

Looking for an experienced fencing contractor/company to supply and install new fencing and gates and modify an existing fence at a residential property in Ingle Farm SA 5098. Photos of the existing fence and overall front of the property are attached. The new front fence and gates are to match the style, profile and colour of the existing tubular/picket fence as closely as practicable. Scope: 1. Extend existing fence – approx. 10 m a. Existing overall height approximately 1.3 m. b. Existing fence is installed above 1 × 200 × 75 mm concrete sleeper. c. Add 2 additional 200 × 75 mm concrete sleepers. d. Raise/reinstall the existing fence above the new sleepers. e. Target finished overall height approximately 1.7 m. f. Existing panels to be reused where practicable. g. Include any necessary post extensions/replacement, sleeper posts/channels, footings and fixings required for the modified arrangement. 2. New front fence – approx. 7.2 m total frontage a. Supply and install approximately 1.7 m high tubular/picket fencing, matching the existing fence shown in the attached photo. b. Front fence arrangement to incorporate the driveway sliding gate and pedestrian gate below. 3. Sliding driveway gate a. Approximately 3.5 m clear opening. b. Approximately 1.7 m high, matching the fence. c. Sliding gate may run behind/overlap the pedestrian gate/fixed fence section when open. d. Please provide price for manual sliding gate, with motorised/automatic operation shown separately as an option. 4. Pedestrian gate a. Approximately 1.0 m wide × 1.7 m high. b. Match the new fence and sliding gate. c. Pedestrian gate only needs to be accessible when the sliding driveway gate is closed. d. Include hinges, latch/lock and required hardware. Please quote for complete supply and installation, including all materials, labour, posts, footings, sleepers, gate hardware, fixings and disposal of construction waste.

Hi there, was hoping for a quote for one of my gates. Essentially the two hinges have rusted off, so I think the A frame needs replacement whilst the colourbond on its probably reusable.

Disclosure- AI helped me write this. Looking for an experienced gate installer, handy electrician, or handy person to fix my LockMaster Double Swing Automatic Driveway Gates. The gates are about 3 years old and have worked great until a few weeks ago. The Problem:When I use the remote, the gates close all the way to the center, but the moment they touch, they immediately change direction and open all the way back up on their own.What I have tried already:I unlocked them with the key and pushed them by hand—they swing completely smoothly and do not scratch or scrape the ground at all.I tried messing with the limit screws and force dials on the control box, but it didn't help.The strange clue: If I physically flip the long black arm mechanisms upside down, the gates close properly! But when I put them back the correct way up, the issue returns.It seems like a wiring mix-up, a setting glitch making the motor run backward, or a broken switch inside one of the gate arms. Please bring a basic toolkit and a multimeter to test the power. Please Let me know your experience fixing automatic gates when you make an offer! Thanks

Seeking quote to replace rotted timber picket fence. Approx 10m fence + 1.2m gate. Looking to replace like-for-like with treated pine. Can price with painting included or excluded. Need existing fence hauled away

- Drop bolt installation - New gate latch hardware purchased today - Lockable latch installation onto colourbond fence gate

Hang two farm gates off two large posts

fence sheets taken down and a more morern slat gate installed, i dont have the materials but there is a bunnings down the road, happy for somone to mesure and install the cheapest one. Looks like a day job

Hi, Needing someone to replace the corrugated polycarbonate veranda roofing.

My electric gate hinge has snapped and needs welding I would like all hinges looked at

Pool glass gate isn’t closing by itself. Need fixing to close itself

Looking for someone to help as a gate has come off the brick wall. Its originally been bolted into the mortar and the bottom bracket has come out, and the top ones rusted. Looking for a quote for someone to fix it and what they would do to fix it as well.

We need a pool gate fixed It is not closing properly

We have a pool gate that has sagged slightly, so now doesn’t close properly. Original installation didn’t include all screws, so guess that has impacted it. Need it to be taken down and reinstalled properly so it auto closes and latches per compliance regulations. It has the right auto close hinges etc.

I need someone to come measure my gates and grab anything that fits and is sturdy and replace gate will cover expenses ontop, need done asap as have large dogs gate has to be able to hold them in there lay the challenge the gate below failed