Find professional sliding gate repairs in SA

We are looking to replace our front fence with a red brick pillar and rail style fence with an automated sliding driveway gate and pedestrian access. Pic of out house frontage and example of what we would like attached. Must be licenced.

Looking for an experienced fencing contractor/company to supply and install new fencing and gates and modify an existing fence at a residential property in Ingle Farm SA 5098. Photos of the existing fence and overall front of the property are attached. The new front fence and gates are to match the style, profile and colour of the existing tubular/picket fence as closely as practicable. Scope: 1. Extend existing fence – approx. 10 m a. Existing overall height approximately 1.3 m. b. Existing fence is installed above 1 × 200 × 75 mm concrete sleeper. c. Add 2 additional 200 × 75 mm concrete sleepers. d. Raise/reinstall the existing fence above the new sleepers. e. Target finished overall height approximately 1.7 m. f. Existing panels to be reused where practicable. g. Include any necessary post extensions/replacement, sleeper posts/channels, footings and fixings required for the modified arrangement. 2. New front fence – approx. 7.2 m total frontage a. Supply and install approximately 1.7 m high tubular/picket fencing, matching the existing fence shown in the attached photo. b. Front fence arrangement to incorporate the driveway sliding gate and pedestrian gate below. 3. Sliding driveway gate a. Approximately 3.5 m clear opening. b. Approximately 1.7 m high, matching the fence. c. Sliding gate may run behind/overlap the pedestrian gate/fixed fence section when open. d. Please provide price for manual sliding gate, with motorised/automatic operation shown separately as an option. 4. Pedestrian gate a. Approximately 1.0 m wide × 1.7 m high. b. Match the new fence and sliding gate. c. Pedestrian gate only needs to be accessible when the sliding driveway gate is closed. d. Include hinges, latch/lock and required hardware. Please quote for complete supply and installation, including all materials, labour, posts, footings, sleepers, gate hardware, fixings and disposal of construction waste.

Sliding gate frequent issue

I need a remote for my gate programmed to open and close it

I need my remote programmed to my sliding front gate

Have a new remote but can’t program it to automatic gate. Or program it to housemates remote that works

I had to get a new remote for gate but can not program it to gate. I have house parters remote

I'm in need of a concrete plinth for a fence/electric sliding gate we're having put in at our house at coromandel Valley. It will be about 10,300mm long, 450mm wide at whatever thickness is recommended for this job. There will need to be a small part of it a little wider than 450 as a pad for the motor to sit on. I'll attach a pic of a drawing the fencing guy did and also the spot. Posts are currently in. Thanks

Our roller / sidling gate has stopped working. Maybe sensor issue

Looking for an experienced concreter to inspect and provide a quote to re-concrete and level the front section of my driveway. I'm planning to have a sliding gate installed, so the new concrete needs to be level and suitable for the gate track and installation.

Sliding gate is slightly bent and causing it to jam when opening and closing. Motor is working fine, but the gate alignment seems off. Looking for someone to inspect and fix (prefer realignment instead of replacement). Located in Adelaide.

Install automatic gate. 1.8m by 3.6m. Need done ASAP so First person to contact will get the job.

Concrete slab for the sliding gate 500×40cm. And one side slab 360,×80cm. Approximately 100mm slab. Please send me your quotes.

Concrete slab in front of the house for the sliding gate 500×40cm. And on the side 369×80cm. Approximately 100mm concrete slab. Please send me your quotes.

Sliding gate won’t open. And when it was working it wouldn’t shut fully.

Need Sliding gate to be installed, Gate need to be as per following 1. Height 1.5 meter with top of the vertical slats pointed/spikes 2. gate length 5.9 meter 3. Vertical slats width -to be standard - low budget 4. Distance between standard vertical slats to be 120mm Need estimate for motorized and non motorized /manual gate. Supply for the motor will be arranged by me up to motor point. My expected price quoted here is slightly negotiable.

I need someone to fix my front gate. The lock area is not align and doesn’t line up properly anymore, so the gate won’t close or lock properly and there a little gap.

Looking for someone who can repair a sliding automatic main gate. Main gate motor is not working so need to replace motor.

Need a 8m strip footing (8000mm x 300mm x 130mm deep) for electric sliding gate. All materials and equipment to be supplied by worker. Can provide timber for boxing if needed. Will be 4m at 300mm across driveway graded as Gravel driveway and then 4m at 220mm and a small pad for gate motor.

Automatic sliding door has become stuck and manual lever handle is also broken, just need to open the gate manually.