79 Gate Installation Experts in Outer East Melbourne

We need someone to help in repairing or adjusting the hinges on our pool gates to comply with building regulations. Currently both gates will not self close, which is required. - Due date: Before Friday, 22nd Oct 2021

need to repair pool fence gate - replace door hinges with self latching ones. I have some hinges I can supply. And install pool fence extension in one small section which is 1100mm (below the compliant limit of 1200mm). Budget flexible (ignore the task price)

Supply and install for 25m of capped paling fence in Warrandyte. Would like quote for both hardwood palings and TP palings. Open to other styles of privacy fencing at similar price point. Some trees to navigate around (See photos). - 15m (approx) length heading up hill from existing fence - 7m (approx) on more level section at top (Gate will be installed in this section) - One steel framed double gate required with opening of 3metres. May also require additional 900mm access gate in one section, depending on cost. Easy, open access to location via trucks/ trailer/ digger etc. Dead tree on fenceline will be removed prior to installation. May need additional fences at a later stage. - Due date: Flexible

Existing Gate to be replaced with the new one ! Need someone to visit, measure and give us quote including all cost. Also need to install fencing panels - can be discussed during the time of visit - Due date: Flexible

Hello I need someone to install a back door / gate between exterior hallway and courtyard. See picture - the area is larger than a normal door. Detailed measurement can be provided. Pls suggest material as the area will get moisture from rain. Job to be completed before end of October. Pls quote, thanks.

We need a fence/gate built connecting our house brick with fence.

Replace existing timber fence (1.5m x 2m) with timber gate of same/similar size to provide functional access to rear of property. Must be able to lock for security purposes. Happy to recycle existing timber if practical to do so.

Needing a trench dug so that they gates can be connected to power. Even better if you can quote the whole job. Approx 12-15 metres I am open to days

The gate hinges need to be adjusted so the gate is self-closing to meet building regulations. A plexi glass shield needs to be installed as well.

its a gated community with irrgation turned off etc from the controler it hasnt been working for some years couple of heads broken maybe the line needs flushing unsure need a quote on how much it will cost to be turned back on and working in toll i think thiers around 14 springler heads out the front along canterbury rd - Due date: Flexible

Hi, we are looking to get this area paved or concreted (something nice that wouldn’t need pavers on top). Whichever works out as the cheapest or easiest option! The area is clay and isn’t quite level. Would be looking to get around 3m x4m We would probably supply the pavers (potentially travertine). Wanting done fairly soon

Need to fix 2 metal hinges from a gate to a metal frame. The gate is heavy so may need to add 1 additional hinge or maybe welding will not be enough on itself. Also it will need some additional way to fix it to the frame as I think only by welding it will not be enough and it will break again.

Install double gates 1.8 m high and each 1.5 wide.

2 smaller (Gate/fence) carpentry jobs need quotes. Two side Gates/fences need to be built. (similar to the gate in photo 1) 1. Replacement of an old gate Gate is approximately 1500 mm wide by 1600 mm high. 2 x 115 mm square Cypress Pine Posts. Gate frame to be steel. Gate to incorporate lockable catch. Key operate able from both sides. Windsor Style Pickets. 2. New gate for the opening in photo 2. 1.3 m wide 1.2 m high. Plain pickets ,simple latch 2 wooden half gates, opening outwards is preferred. Please feel free to contact me if you have any questions. Due date: Flexible

Gate hinge needing replacement. I have attached a photo of the broken hinge and one of the other hinge. The gate swings inwards and goes on a diagonal upward angle when opening

Colorbond gate: left and right gate are colliding(overlapping), gate can't be closed, don't know how this happened over time. Not sure if this can be fixed or needs replacing. Shed Sliding Door: The sliding door is held by wheels running on rails on the top, but something has come loose on the right end causing the door to drag on the ground and hard to close.

We're wanting to install a picket driveway gate, approx. 3m wide x 1m high (each gate approx 1.5m wide). Clean simple pickets on metal frame. Interested to know the cost of just the gate and what the cost of installation would be too. flexible with date but the sooner the better. (Image is just for rough idea. No fence needed, just the gate, the it would be clean square profile pickets). - Due date: Flexible

Hi there I need someone to take apart my gate and use materials on a new aluminium frame or something that will be light Enough to make it self closing and pool safety compliant I have enclosed a photo of another gate I have and with the frame as an example

Moved into new place.. Have young kids/trailers etc want to ‘secure’... Looking for something solid (not see through) Hoping for remote (please quote separately) Size 4.1mtrs W Can ad pics tomrw when I’m there.. Budget 🤷‍♀️ (Hopefully owners agree to sharing cost 🤞) (Guess if not we just pay and remove when leave!)

Looking for appealing front yard fence thats also affordable with gate for driveway. Havent decided on type of fence. Looking to get a quote.