50 Vinyl Flooring Experts in QLD

Supply and install masonite under lay for vinyl floor planks that I have onsite in a second bedroom size of room is 2600x 3400 So simply masonite and glues and labour to install supplied vinyl floor planks

Handyman needed to lay floating floors in small laundry. Skirting also needs to be redone. Doors rehung.

Install 60m of 5mm vinyl plank (skirtings etc already removed) Please quote to install Planks and quote on another line to self level floor (may not be required depending on if I remove tiles). Tell me your experience. Sunshine Coast Thank you!!!

We are looking for someone to prep and install Vinyl flooring in our open plan lounge/dining/kitchen area. The total area is approx 69sqm and we’re purchasing 75sqm of vinyl planks. The existing flooring is an older tile with a grout which we’ve been advised will need a levelling flooding/pour, and also ramps to a 10sqm area which used to have carpet but we’ve ripped it up. This quote is for the prep on the existing flooring and the installation of the planks. We are very flexible of timeframes as long as done by the end of July

70 m2 of hybrid vinyl planks to lay. Need to be cut in around edges and doors. Also cut and install scotia cover strips along edges. Need someone with experience doing this job with the table saw to cut the planks

I have 22sq metres of vinyl plank flooring to be laid on concrete (and over tiles in a toilet) in a rectangular room, fairly straight forward it's actually only 20.5 sq metres of area (just measured) for which I also need DL505 Decoline natural oak vinyl planks - are you able to quote for this as well?

We have recently taken out a wall in the lounge room which has left us needing to replace some of our flooring! We literally only have 10 planks spare and they have discontinued this colour so we need a professional. One area the concrete is a bit uneven so will need prepping before hand! I’ve attached pics!

need vinyl flooring done. my house already got tiles. looking for someone who got experience and do quality work. thanks

17 square meters in the kitchen and dining area

Hi, I need a vinyl flooring installer to weld two vinyl sheets and a couple of corners. The line between them is 3 metres long

Looking for someone who is Experienced @ Fitting Vinyl Floating Floorboards. Happy to do it with You & we can also get another Hand if Needed to Help You Out if you like It’s only about 26 SQ Metres, so expect about 4-5 Hours. Looking forward to Meeting & Learning from You along the way. Thanks Darren :-)

The area we’re looking at is for the lounge and the two bedrooms. Please see floor plan attached. The total area is around 38.6m2. We’ve proposed here the costs for installation only so you don’t have to pay for airtasker commission on materials. Please advise if you could supply the vinyl planks and the costs. Please note the Field Impact Isolation (“FIIC”) of the works when completed shall not be less than 77 as per the Body Corp requirements.

Installing vinyl flooring - kitchen approx 6-8sqm. We are seeking someone who is experienced in installing this flooring and can complete neatly and efficiently. We will provide the flooring but do not have other tools if required. We are home to have the job to be completed Monday, Tuesday, Wednesday or Thursday.

I would like quotes on the cost of removing existing sheet vinyl and carpet from living, kitchen and 3 bedrooms and installation of underlay and vinyl planking across two days. Total area is approximately 85m2. I have included a photo of the su floor from under the house.

Hi, I need to install 2 vinyl rolls in a to room of 12m2. The floor is Masonite ready to go. I have the glue and vinyl. You need the vinyl rod, clear gray and a heat gun.

Install 70sqms vinyl click lock plants this Sunday or Monday.

We need vinyl plank flooring laid in our master bedroom & walk in robe. Room is 4.2m x 3.6m This flooring does not need to be glued, just clicks in to place. Floor are is cleared ready to lay. Need this done in the next few days,

We need a professional flooring installer to help us first measure the right amount of flooring we need, and quote to install the hybrid vinyl flooring when it arrives. We have sourced a supplier already at a reasonable price for the flooring, but we will need your help to order and purchase trim. There is approximately 125m2 of flooring to install. You can provide your rate per m2, for measure and install or a flat rate for the entire job would be considered. If you supply and install at a reasonable per metre rate that would be considered also as the material has not been ordered yet.

Have purchased vinyl plank click flooring, looking for someone to install this in a bedroom approx 2.8m x 3.2m. Looking for this task to be done ASAP this week. Skirting boards have been removed, only require the planks laid, I will take care of fitting skirting boards back.

I am in needing for someone who can lay the vinyal flooring for my 12 seater mini bus. Pictures of how it looks like can be found in attached pics. The vinyl sheets are self adhesive. Experiences with marine flooring is appreciated. I dont have a budget in mind. Please quote.