Find a local floor sanding profesional in Inner South Melbourne

We are replacing old skirting boards and have exposed the older sections of floor boards which need to be sanded down and polished

Need deck (25m2) sanded and oiled - spotted gum boards. I can supply the oil. You need sander and brush.

Wanting the approx 9m2 of spotted gum decking cleaned and sanded back to as close to original natural colour as possible. Same with the bifold doors (which aren’t as badly weathered). Original photos (natural colour) and current photos (darker) provided

Sanding off the glue etc on chipboard flooring. Small apartment 40sq floor. It’s an easy job can do alone. $500 nothing more

Title: Timber Deck Restoration– Pressure Cleaning, Sanding & Cabot’s Aquadeck Oiling Location: Brighton East Deck Size: Approximately 15–25 m² Budget: $750 (including labour and materials) Looking for an experienced deck restoration specialist or handyman. Scope of Work: * Check and punch down existing nails * Pressure clean the deck using timber-safe pressure * Sand the entire deck to a smooth finish * Apply 2 coats of Cabot’s Aquadeck UV-protective decking finish * Allow appropriate drying time between stages * Supply all equipment, oil and materials * Clean up after completion Also oil a small wooden shed front ans side ( maintainance) Please provide: * Fixed-price quote including GST * Itemised labour and material costs * Confirmation that Cabot’s Aquadeck is included * Availability and estimated completion time Note: Damaged timber boards will be replaced separately before restoration. Photos available.

Floor leveling and sanding. Building renovation, Downstairs hardwood flooring to be sanded and levelled, upstairs flooring to be slightly sanded for highs. Approx 85m of engineered flooring to go down.

Need these two rooms sanded down to bare timber then fine sanded. Old polish on top sitting under carpet for years. If you can do staining and coating as well that would be great

Sanding of old varnish on 1/2 deck and then oiling of the old and new part of the deck. Roughly 4m x 5m

I'm ready to hire a tradie to light sand and finish herringbone parquetry flooring in my single-storey house, covering around 90 sqm. with Bona water based 2 coats

2 deck areas need sanding and sealing Approx 30sqm

Floor Sanding & Polishing (41.5m² Hardwood) – Eco-Friendly / Fast Turnaround Looking for an experienced, professional floor sander to restore approximately 41.5m² of existing timber floorboards. The area includes an entry, a long hallway, a dining room, a kitchen (featuring a fixed island bench), and a small pantry. The home includes a toddler and a pet, so a safe, low-toxicity, and low-odour process is an absolute priority. We require a 3-day turnaround to allow us back into the home safely. Area Breakdown & Scope: - Total Measured Area: ~41.5 m² (Detailed floor plan/sketch available in photos) - Spaces: Entry (6.5m²), Hallway (9.8m²), and combined Kitchen/Dining area (25.3m²). Includes working around island bench, small pantry. - Timber Type: Existing Australian hardwood (appears to be Spotted Gum / mixed native hardwood). Requirements & Finishing Specifications: - Sanding: Full sand back to bare timber, deep enough to cleanly remove the heavy scratching in the dining and sliding door zones. Includes nail punching and standard gap filling. - Color Tone: Retain natural warm tones of the hardwood, using a warming/intensifying water-based primer (e.g., Bona Intense, Bona Amber, or equivalent) to prevent a washed-out or milky look. - Topcoat & Sheen: Two coats of premium, commercial-grade, non-toxic water-based polyurethane in a Satin finish (Strictly no high-gloss or dead matte). - Product Preference: Strong preference for Bona Traffic HD (GreenGuard Gold Certified) or Loba 2K Invisible Protect to ensure it is completely safe and low-VOC for our toddler and pet. Timeline & Logistics: - Must be completed across a strict 3-day schedule so the home is walkable in clean socks on Day 3 evening. Please include in your quote: 1. Your total fixed price inclusive of all materials, GST, and machinery. 2. Confirming which water-based sealer and satin topcoat brands you intend to use. 3. Your availability/earliest start date. 4. Proof of trade insurance.

Sanding and finishing floor in Matt finish

Sanding 14 stairs on the stair case And staining them I have the clear stain already

Need our Deck revitalised. Sanding, staining, the whole box and dice! Currently looking a bit sad. Need an expert to make it look beautiful again for Spring 🌱. Approx 7.3m X 5.5m + steps.

Thorough sanding required as Decks severely weather beaten One Timber Deck at rear of house measuring 4.0m x 3.0m and a landing timber deck area near Porch Entry measuring 8-10 sqm. Total area nearly 30 sqm Thorough and Good sanding and preparation is a MUST. We want only Merbu Stain AND at least 3 coats applied as current coatings worn out. Please include all materials including cleaning solution, sand paper, Cabot Merbu stain, all applicators, protective cutting tapes etc etc in your quote

Need a 27m2 merbau deck lightly sanded back so I can apply decking oil myself. Deck is ground level, easy access Just a light sand to knock back the grey/rough grain not a full strip Power and water available on site. Happy to work around your availability just let me know when you could do it and how long you'd expect it to take.

11 x timber posts in front yard need to be sanded back to remove as little as possible off surfaces to reveal the original timber and no stain. Posts are approx 2 mths in height. Shrubs can be cut down to be half their height to allow greater access to the posts. Would prefer someone who is experienced with this and takes pride in their work to bring these posts back to their former glory. Planning on coating with oil only (no stain) once sanded so they will have "pride of place" at the entrance way.

Sand a floor and stain .

37 m/2 Baltic pine. Sand and refinish, would prefer a water based polyurethane finish. Ground floor California bungalow

Hi, looking for an experienced deck sander to come in and sand and prep and apply 2 coats of Feast & Watson Matt Merbau deck oil (supplied). 40m2 deck total plus 1.5m2 step. Tried an orbital sander by hand and gave up after one board, tried deck clean and pressure wash but wasn’t lifting stain off well. Need a full sand