Find experienced local fencing contractors in Springwood

Supply and install min 1.8m high powder coated horizontal slated zero gapped aluminium fence, motorized 2.4m sliding Gate and 1.2m key locked pedestrian gate. Approximately 6m panel, 2.4m motorized sliding gate, 11m panel, 1.2m pedestrian gate with flush dead keyed lock, 9m panel. Post size powder coated steel post min 75x75, 1/3 length in concrete footing, spacing no more than 2.4m. Conduits for power and lightings at gates posts. Built in A4 letter box. - Due date: Flexible

1. Removal of existing chainmail fencing. 2. Installation of approx. 10m of Colorbond fencing and posts - already on site ready for installation. 3. Clearance and disposal of all removed fencing material. Note: access available from both sides. - Due date: Flexible

Cut a few inches of colourbond posts, (4) cut 1 sheet in half.

Hi Rod You interested in quoting for a full replacement of a small pool fence, on side of house, which joins a boundary fence. Total length is about 4.5 mtrs plus a gate. I'm looking at replacing with a flat top protector fence and gate from bunnings which I will buy and have delivered, unless you have a vehicle that can go that [ include in your quote and specific if you can] Will need to dig two holes for posts and the two posts for the gate will need to be dyna bolted to concrete pad surrounding pool. I can remove the existing fence prior to your arrival, though if you have the means to take to dump can you include a figure in your quote for that. With the set up of the fence which is in a garden bed next to concrete pad surrounding pool I'm not sure about the appropriate distances about ground with the fence product I am considering. If you provide an email I will send through photos. In relation to timing it would be nice if it could be done prior to 26 Jan but it's not a deal breaker. I'm retired and will be home and can assist as required. I'm not totally useless and have built the timber fencing around my property my self. Looking forward to hearing from you. I'm also after some advice re ensuring the rest of my fencing is compliant, Regards Craig

4 x 3 wooden fence and a gate to be installed. I have the Materials ready for cutting and installation. Next to a pargola . - Due date: Flexible

5700x2800 L shaped fence with 950 gate Require measure to quote. Need ASAP due to pool compliance - Due date: Flexible

Removal of temporary fence at the back of a carport and reassemble it at the front of the carport. This is an extra precaution to contain our dog. - Due date: Before Thursday, 1 December 2022

Remove and dispose the existing colorbond double gate along with another colorbond fence panel attached to the gate - Due date: Flexible

I need a section of colourbond fencing removed and relace with a gate (open inwards) and lockable (1800 x 900). Depending on quality of work, more jobs available. - Due date: Flexible

We need to do fence 11 metre at backyard - Due date: Flexible

We are wanting to remove a panel from our front fence to create an entrance. We would like to have an arbor and gate with a letter box. - Due date: Flexible

Looking for someone who can install new fence or if any other ideas most welcome but not too expensive - Due date: Flexible

I got colourbond wall and wooden fence underneath is brole down ,and we need to repair wooden fence - Due date: Flexible

Remove old colour bond fence. We want to build out a new fence in the colour monument. Quote for removing of old fence + installation of new fence - Due date: Flexible

Need to install glass pool fence approx 20 meters as shown in the images. This will be approx 10 - 11 panels including gate. Providing Form 16

Install Dual Lock Master Swing gate on wooden fence Requires cutting concrete driveway to run cables in diver for power Will supply the lock master swing gate kit solar panels (LockMaster Swing Gate Opener Auto Solar Power Electric Kit Remote Control 1000KG https://www.amazon.com.au/dp/B07TJR2T94/ref=cm_sw_r_cp_api_i_0VN2VB0DF9EGBYPFC3ZQ?psc=1) - Due date: Flexible

Measure to order bunnings pool fencing i can do this and pay for materials required, and then installing 3 sided with 2 gates. - Due date: Flexible

need to do footings and brick fence. - Due date: Flexible

My car jit on the timber sleeper and made a small damages on that. I hope this can be repaired in this week.

I need a 0.5m high x 6m long concrete sleeper or Bessel Block retainng wall built and a existing 9m standard wooden fence on it relaced. Work area is in a confined space so may need 4 post holes to be manually dug. - Due date: Flexible