Find experienced local fencing contractors in Sherwood

Can I get someone to replace these two damaged fence pailing as indicated in picture. Fence piling hardwood 18 ml thick width 100 by 2.3 meter long. Please bring the materials with you to fix it - Due date: Needs to be done on Monday, 25 July 2022

It's already a full fence petition there where Ive moved into a new unit but not finished at the end and I'm going to get that finished at the end which is about a metre and a half to keep my small dogs in so it's a 6 foot petition round about have to carry on for that metre and a half at the same height so that part of my yard is fully fenced. - Due date: Needs to be done on Tuesday, 31 May 2022

We rEquire 16.5 Meter of PVC fence installed with a small gate and a sliding gate for a single car preferably with the remote opening mechanism and lights on the post.

There is already a fence in place. So the task is to put palings and sleepers on my side of the fence. Will need to head to bunnings and grab some timber, and any additional materials. The ground is slightly downward sloping, so will need to neatly step the fence and cut the top to make sure everything is neat and tidy. 22m in length.

I need to install a pool gate in frameless glass, plus one extra pane. I can supply glass, gate, and spigots.

4m x 1.8m high fence- free standing Wooden Pailing 8m x 1.8 high fence Wooden Pailing - against existing fence 2.2m wooden gate x 1.8m high

I will supply materials. Old fence has already been removed. Need someone to build 1200 high, approximately 20 m long picket fence. About 8 posts. Will need coil nailer or similar.

Approximately 13 metres of steel and wire fencing. Will need to grind out posts and remove steel posts. Brackets have been removed. Will need grinder and equipment to do the job.

Need to increase height of front wood fence for more privacy. Approx 10m of fence. On-site inspection likely requires to properly quote. Open to either wooden carpentry or prefabricated (e.g. Bunnings) solution.

Some plants over my neighbours fence apparently mean I need to cap my rear pool fence by 5cm. I think this is a relatively simple task, big I don't have a nail gun and I'd rather get someone with a bit more skill than me. Width of fence is 10.9m need to just cap it 5cm. I'll pay for timber on top of the quoted budget. I've included pics of the fence, and also pics of what may do the trick. Would like it done anytime between now and 14 Oct.

Looking for an experienced timber fence builder or carpenter. Flexible with availability over the next two weeks. I have a timber fence built on top of small retaining wall. The fence and wall are in good condition but the fence has a lean on it where it is attached to the retaining wall via brackets. I would like the lean to be corrected either by adjusting the brackets or some other means. Fence dimensions 1.8m high x 10m plus another section of small lean 1.8m high x 5m. I own land on both sides of the fence so access is ok. I also need a small side gate constructed 1.8m x 50cm between the side of the house and the fence. Gate to made of timber with metal railings. All building materials to be provided by the tasker for which I will pay for as an additional cost.

Looking for between 34m 3 rail, 6 foot treated timber fencing and a side gate, as well as 14m of 4 foot timber fencing with gate. Happy to pay cash and offer labour, mid April. Timber to be provided by tradesmen. Plus removal of old chain wire fence.