Find experienced local fencing contractors in QLD

Length: 12m Height: 1.2M Location front fence, please see reference images attached. The yellow line is roughly where the fence will go. Cheers, Derrick

GARDEN EDGE CUT 30 MILLIMETRES OFF THE BRICKWORK GATE POST TIMBERS CUT OFF APPROXIMATELY 160 MILLIMETRES ABOVE GROUND LEVEL.

To dig holes for fence posts

Project Overview I need a sturdy, pest-proof enclosure built over an existing 8 m × 4 m garden bed so that insects, birds and small animals can’t reach my growing produce. I’ll supply the 2.4 m RHS steel posts and instant-mix cement; I will pay for materials. Scope of Work 1. Frame Installation Posts: Set ten (or as required) 2.4 m RHS steel posts into concrete footings around the 8 × 4 m perimeter. Spacing & Layout: Posts should be spaced roughly 1.5–2 m apart to support side rails and netting securely. Concrete Footings: Use instant-mix cement to anchor each post plumb and level. 2. Side Rails & Support Rails: Install horizontal timber or metal rails between posts at two heights (e.g. 0.5 m and 2 m) to attach netting. Bracing: Add diagonal braces or top cross-members to stiffen the frame and prevent sagging. 3. Pest-Proof Covering Netting: Secure fine-mesh insect netting (2 mm mesh or smaller) tightly around all sides and over the top to keep out birds, insects and small mammals. Access: Build one wide lockable hinged or removable door/section for easy entry, harvesting and maintenance. Wheelbarrow should fit comfortably. 4. Finish & Weatherproofing Fixings: Use corrosion-resistant screws, bolts and clips suitable for outdoor use. Sealing: Ensure any timber is treated or painted for exterior exposure (I can supply paint), and netting edges are neatly trimmed and secured.

Repositioning of existing colorbond fence and the addition of a side fence and gate and cane toad defence.

Around 20 meters of low lying fence for garden area with posts going into concrete, and dug into dirt. 1 or 2 gates / entrance points. Style same as fence in picture with 2 top railings and link fence below - however just not as high as the picture fence, smaller version. Budget is only to post job - quote what you feel it would cost.

Need to fix garden gate, we can't lock it, ?need extension

Needing two garden fences put in with gates, first fence will be 3m other fence is 2.3m (materials will need to be supplied) - Please see photos for reference

As described. Remove and install single side gate .

The timber garden gate urgently needs repair. The supporting post at the base has become loose, and the central post shows a large crack in the wood. As a result, the gate has fallen over. Immediate repairs are required to secure the loose post and either reinforce or replace the damaged central post to restore the gate’s stability and functionality.

1 post of trellis has fallen over and pulled out of the ground. Needs to be stood up and concreted and/or braced.

2 fences with gates for animal enclosure, and boundary fencing to contain dogs to part of garden. Will need to view to quote.

AirTasker Ad: Replace 3 Fence Posts (Side Garden Fence) Looking for a skilled handyman to replace 3 fence posts. The job will require digging under a slab from the neighbor's side to access and remove the old posts. Or erecting new posts from neighbours side. There are 4 steel posts on site if required. Details: Remove and replace 3 posts. Digging under a slab required for access. Must have own tools and materials (if needed, we can discuss supplies). Careful work to avoid damage to surrounding areas. Please provide your experience, availability, and quote. Flexible with timing but would like it done soon!

Hi. We need to get 2 old style garden gates fixed to make them close better. I tried to fix the latch on one of them but it wasn't great. Please can you let me know approximate cost and availability. Thanks, Wes

Wire trellis installation on back timber fence

Hi there, Anyone is qualified to help me to build and install the timber garden fence at my cafe. You would need to measure the area.

I need 4 steel sleeper posts installed for a timber sleeper garden wall. I’ve already dug holes to 450mm deep by these will need to be 600mm deep. Posts will be 1200mm high I don’t have the right spade to dig deeper. Ideally, whoever does this will have a laser level or some way to ensure the posts are installed at the right height. I will supply posts and premix concrete. Just need someone’s skill to put the posts in correctly. I wouldn’t expect this to take more than 2 hours for someone with the right tools and experience.

I’m looking for a professional to inspect two fences that are in poor condition: The fence next to the pool, which is deteriorating. The garden fence, which came loose after a palm tree fell on it during last year’s storm. The payment for this task is only for the inspection. After the inspection, I expect a detailed quote for either repairing or replacing the fences.

100 meter color bond fencing

With power tool unscrew screws from timber posts & remove timber paling used as garden edging & remove posts. Length of timber garden edging is 1410cm. Take to tip.

In need of temporary dog fencing installed around certain areas of my yard for my 9 week old puppy. Dog mesh and stakes will be available

50-100m of fencing. Just need staples hammered in on top rail to hold fence up- 30minutes work tops

I need a dog proof gate for back end and also one in the front under the existing gate where there is an opening. I want to make sure the price includes labour and material. I would prefer if this can be done either on thursday or friday this week. I have attached the pictures for front and back section. The height of gate need not be that big as we have is a puppy so probably half a meter.

Make a proper door for dogs between 2 unit .

Looking for a handyman to build a pet fence and gates for a small areas beside our house. We have a gate that also needs to be repaired.

Drill bracket extensions onto fence .

I need someone to put up a catnet on the fence as per photo I have all the materials just need it put up. Im open to offers so keeping the budget low on here

Install Railway Sleeper Under Colorbond Fence to Puppy-Proof Backyard Task Description: We need a railway sleeper (or similar solid timber/treated pine) installed along the bottom of our Colorbond steel fence to prevent our puppy from escaping. The gap underneath the fence currently allows room for digging or slipping through, so the goal is to create a secure barrier along one side of the fence line (approx. estimated length 2-3m). Details: • Fence type: Colorbond steel • Task: Excavate shallow trench (if required), place and secure railway sleeper flush along the base • We’re happy to purchase the sleeper ahead of time, or you can supply and include it in your quote • Access: Easy side access to the fence • Preferred completion date: ASAP Outcome: A neat and secure install that ensures no gaps are left for our dog to dig or escape under the fence. Please bring: • Tools to cut, dig, and secure sleeper in place • Experience in similar fencing/landscaping tasks preferred

I brought a dog house for my frenchi and cannot build it as I don’t have the tools drill etc and have no clue what I’m doing need help.

1. Use drill to drill back in broken outside JV paling that dog has pushed out. 2. Fix front fence - drill back in broken paling and glue back together top of paling

Part of our dog fence has been damaged and needs repair (or possible replacing). The fence is 1m high and the damaged area is 12m long. The timber posts and top rail are fine; it's just the dog wire fencing that is damaged and looks bad.

Small gate, fencing under the house and pillars laid on the side of the house where my little dog digs out

We have a property in Palm Woods that we have a fence already, but we want dog proof so a smaller chicken wire added to the fence we would like a quote, please

Installed a gate about 6m into the property from the frontage. Now I need to joint the gate to the frontage fence. I have metal posts and a pedestrian gate to complete that work. I need someone who can help me asap with the installation of that potion of the fence. So it's 2 sides of about 6m each. Will definitely need someone who can also do some welding

Certification for an existing pool after Reno

Replace top wire, dog proof wire around a house yard. And straining is required. Remove existing wire, some corner posts may need bracing. I can supply wire etc . Length is approx 150metres

Hey tgere I would like a reasonably priced goat and dog fencing and a quote ? Thanks Sherif

I need somebody to build a heavy duty secure outdoor enclosure for five dogs that need to be separate

Build 2 x wire dog pens.

Hi, dog is a digger and I am wondering if some one can please place some wired mesh I will supply it around the fence to stop the digging.

Existing timber fence to be replaced is approx. 38 metres long, we require a 1.5 metres wide gate , both fence and gate to be 1.5 metres high , block is slightly sloping and it is a side fence not front fence.Includes removal of existing fence ,

Approximately 42m of colorbond fence needing to be erected. Including 2 double gates and a personal access gate. Once side into the house jumps up a metre retaining wall. Fence and gates supplied.

fence installation asap - 12/07

Hi I'm looking for a colorbond fence gate installer. One double gate and two single gates. Please get in touch if you are available any time soon.

20 m 1.8high laped and capped timber fence including removal of existing fence. 22 m Colour bond Fence and remove existing timber fence.

Round 2.2 width, standard height. No gate required, just low as possible to ground to stop little dog from getting out.

Looking to replace wooden fence and gate section at front Left and Front right sides of house. Left Side Fence pannel is approx 1850mm Gate panel is approx 1810mm Right Side Fence panel is approx 2330mm Gate Panel is approx 1810mm Hoping to get quotes for - Aluminium slats for fence and gates - Aluminium slats for Gate only with Sawtooth profile colorbond for fence section - Sawtooth profile colorbond for both fence and gates all colouring to be Monument

Approx 3 panels and posts supply and install

Help need to install colourbond fence. I’m happy to do the heavy work. Need the experience and know how.

Please quote me to supply and install PVC or colourbond fencing for 32 meters on one side of the house.

One of the colorbond fence panel flew off during cyclone Alfred. Fence panel needs to be reattached. I do not own a ladder

Need the fence removed and new fence built, hopefully in one day as the fence divides 2 units. The colour bond has to match the other fences in the complex in colour and style.

Remove colour bond fence and stack neatly Fence is to remain on site stacked neatly You will need a ladder and a battery drill/driver to remove screws

Supply and install new Colourbond fencing, approximately 1800mm high. Colour: Surfmist (posts and rails also Surfmist). Include timber sleeper (200x50mm) at the base. Complete removal and disposal of the existing damaged fence (partially broken due to recent cyclone - photo attached for reference). Site clean-up after completion. We have received a quote of $4500 for this work (including $500 for rubbish removal). The contractor who provided is busy and cannot make it in the next few weeks and hence reaching out to Air Tasker. Please provide your best quote. Thanks for your consideration.

Unfortunately the cyclone has uncovered some dodgy work from a fence/gate install I had done recently. The business that did it has disconnected their phone. I would like to have my mailbox installed correctly and my fence put back together.

My side access wooden fence broke, so need another small fence/blockage to the side access. Preferable aluminium or colorbond

Fence fell down during cyclone due to loose post. Have old panels. Just need post to be secured and replace panels, which I have

Hinge on side of the colorbond fence at the front of the property needs to be replaced.

Need timber pool fence replaced, estimated 6 metres in length

Dented the colourbond panel on my driveway gate and need it replaced. Photos from both sides