Find experienced local fencing contractors in ACT

Colorbond fence to be installed. About 60m

Construct a double garden gate (two gates closing on each other), each gate approximately 1.585 meter high and 0.88 m wide. They should consist of good quality timber boards, rounded at the top, and attached to a suitable timber or steel frame. The gates should have a keyed lock, preferably a Lockwood brand. The gates need to be installed, and attached to a brick garden wall on either side.

Need to reinforce a high standing fence/partition.

Installation of double gate. Colorbond. Thanks

Finish setting up 20x temporary fencing panels approximately 2.4m each panel plus connecting joints and plastic footings (50meters give or take). Objective = Corden off property from public access.

Seeking someone to supply and install chain wire fence, along with a gate for the back of our property. 17.2 metres long.

2m length x 1.8m height, will need one sheet of monument colourbond to replace timber fence. - Due date: Flexible

Need a front chain wired fence approximately 24 metres long and also need 2 gates

I've got 1258cm of fence panels I need removed, disposed of and replaced with materials I source, cutting of wooden panels will be required Screws and Nails will have to be supplied by the tasker Current panels are nailed into the frame Panels are from left to right, all 1.8m tall 73cm 375cm 197cm 197cm 355cm 61cm

Remove frameless glass fencing and then reinstall it. The purpose is to have it out of the way while verandah posts are being worked on. - Due date: Before Sunday, 15 October 2023

Need this cladding panel replaced. I have matching colorbond so would just need to be angle grinded to size and secured in place. - Due date: Before Saturday, 23 September 2023

We have a large customised wrought iron fence with a gate. It needs to be assembled and put up with existing poles cemented into the ground. We will clean and touch up the paint.

The glass fence (for a pool) is already in place. Just need a glass gate put in to replace the white metal gate. We can remove the white gate if that is easier? The width is about 1m. Can pay for materials - Due date: Flexible

Need a few pavers replaced before pool fence installed. See spigot holes already drilled. Also some of the fence post holes may need infilling. Have my own spare pavers. Ok for quote to wait until area inspected.

Aluminium slat fencing Approximate 2700mm X 1800mm high 1Xsgl gate with lock latch deluxe 65mm x 16mm slats horizontally spaced 10mm supplied and install 1m x 1800 hardwood paling fence

I am looking for quote to install 1.8 m height colourbond fence with sleepers. Fence will be around 70-80 m. Would need to find out exact boundary line to install the fence

I have a section of garden that I want cleared and I’d like a 10 meter by 2 meter high section of fence built. To secure my backyard for my dogs

I need a colourbond fence and gate taken down and disposed of. Posts are cemented in the ground. I have included many photos that show where the posts are embedded. There are 4 posts in total but I have taken photos of either side of the fence. The end of the fence buts up against the neighbours fence. Not sure if this is an issue. I would like the fence posts cut down and ground down to level so as not to pose a trip hazzard. - Due date: Before Saturday, 9 March 2024

Need a three meter high fence built. It’s wire and steel posts - Due date: Needs to be done on Wednesday, 7 February 2024

Need fence top installed (see photo). Quote hourly rate or can discuss if you want to do on a fix price basis - Due date: Flexible