Find a local glass fencing contractor in VIC

Job Description: I am seeking an experienced glazier or pool fence installer to replace a CRL in-floor hydraulic door closer on a frameless glass pool gate in Essendon. The new CRL closer has already been purchased and is a direct replacement for the existing unit. Scope of works: Remove existing CRL floor-mounted hydraulic closer. Install new CRL closer. Rehang and align frameless glass gate as required. Adjust closing and latching speeds. Ensure the gate self-closes and self-latches correctly for pool fence compliance. Requirements: Experience working with frameless glass pool fencing and floor springs/door closers. Suitable tools and knowledge to safely remove and reinstall the glass gate. Ability to provide references or examples of similar work completed. Please provide a quote, availability, and any relevant experience with CRL floor closers or frameless glass pool gates.

Pool Fence Installation – Labour Only – Edithvale Looking for an experienced fencer, carpenter or skilled handyman to install our new timber pool fence in Edithvale. We supply all fencing materials. We are seeking a fixed quote for the complete installation/labour, not an hourly rate. Fence details: * Approx. 27.8m total pool fencing * 13 × 2000mm W × 1200mm H panels * Panels: 40 × 30mm Spotted Gum vertical battens, approx. 77mm spacing, with tubing through battens for rigidity * 2 × 918mm W × 1200mm H gates * 2 × pool gate lock/latch kits * Approx. 18 × Cypress posts – 90 × 90 × 1800mm Scope: Set out fence according to supplied plans, dig post holes, install/level and concrete Cypress posts, fix all panels to posts, install both gates and latch hardware, and ensure everything is straight, secure and operating correctly. The fence is going into garden beds/ground, not an existing concrete slab. Landscaping has not yet been completed, so access is easy, with predominantly sandy soil, making post-hole digging relatively straightforward. We already have the fencing and posts. Once we meet and confirm the amount required, we are happy to purchase and have the concrete/post mix on site. Please see attached images showing the panel design and the recommended method for fixing the panels to the Cypress posts. As this is a pool safety barrier, installation must meet the manufacturer’s requirements and applicable Victorian pool-fencing requirements. Trades must have current public liability insurance, relevant fencing experience and their own tools/equipment. Please quote for the FULL scope of works, including installation of all posts, panels, gates and hardware. Please also include examples/photos of similar work if available.

Glass pool gate fence stuck not opening

Glass fence to be installed. Installer to provided all materials. Fence is 15 metres long by 1 metre in height. Glass Fence is for an outside deck.

Fix pool fence gate so that it closes automatically .

Only tool need 75 mm drill bit

Install perforated pool fence. Materials supplied 16m with gate.

We have a hot tub/spa pool that needs 3m of fencing.

Pool Fence Installation Enquiry I need a pool fence installed with the following specifications: Distance from the edge of the concrete to the fence line: 3m Distance from the house to the edge: 3.5m Fence required: 3.5m x 3m, L-shaped configuration Fence height: 1.5m One gate/door of standard measurements Purpose: to create an enclosed area for a dog. Please provide a quote inclusive of all parts and labour.

Need to replace pool fencing around our dog wash. 2220mm on one side, and 3250mm on other side (with 950mm gate). Existing drill holes should be able to be used for posts (need to be replaced also). I will provide pool fencing and post. I just need installation.

Looking for an experienced glass pool/spa fence installer to realign our existing glass fence and gate. Some decking had to be removed/reinstalled for a required subframe inspection, which has caused several glass panels and the gate to move out of alignment. Looking to have the panels straightened and gaps evened up, spigots adjusted/repacked as required, and the gate realigned so it self-closes and self-latches correctly. Glass, gate and hardware are all already installed. No new glass required. Please only offer if you have experience adjusting/installing glass pool fencing. Thanks

Have approximately 12-13 meters of pool fencing that needs to be covered with clear roof sheeting to keep my dog from entering the pool yard

I have an existing frameless glass pool gate with spring hinges that no longer self-close. I'm looking to replace them not the glass Can you supply and install them and ensure the gate is adjusted and closes automatically

Need to install a glass fence on the edge of a concrete patio. I have the glass and the spigots, but if anything else is needed, happy to purchase. 3 glass panels need to be installed, ranging between 120 and 190 cm in length. They are 120cm in height. The base is a concrete slab. Easy access to the installation site.

Looking for an experienced pool fencing specialist, glazier, or handyman to replace the glass pool fence door/gate shown in the photo. The pool glass fence door was damaged during recent stormy weather. I only need the door/gate section replaced and fitted back properly, not the whole fence.

Looking for someone to arrange and install a 3.5m glass pool fence with a door in the middle. I have a section on a balcony that I’d like to enclose, 3.5m wide. Assuming can be achieved with: 2 x 1250 side panels 1 x 900 for the door + Spigots, hinges etc https://www.bunnings.com.au/protectoral-1250-x-1200-x-12mm-glass-pool-panel_p0389566 https://www.bunnings.com.au/protectoral-95-x-95-x-162mm-stainless-steel-glass-fence-chisel-spigot-2-pack_p0038898 Looking for a full quote please for the parts supplied and install for the 3.5m gate, preferably installed by next week in Arthurs Seat 3936. Thank you

Glass fencing on spa deck measurement attached

Remove redundant black pool fence gently so that it and all parts can be re used. Including vertices struts from concrete base

Pool door not closing and latching. Fence may need to be readjusted once door swings to resting position.

Need two sides glass fence front side 3.9 meter and another side 2.4 to mount on existing decking board for a spa area -each side has hinge panel for access