64 Fencing Contractors in Geelong

Please provide a quote as to what will be involved in removal of old fence and replacement with new fence. Overall length is 15.4m. Open to options. Note: my side has been cleared of shrubbery to ensure suitable access to remove and build new fence. You may need to trim along rear border to allow 300mm clearance on rear neighbors side. YES, Would like done asap but am flexible with dates/times. Initial offers to be submitted with total and then I may request you to reduce to 5$ as my request is for quote only and balance to be settled separately.

I have a 1-2 domestic fence posts that need to dug out, straightened & concreted in again. Need this one to sit flush with the House. Price is for labour only - will add on costs for bags of concrete. We dont have a certain day that it needs to be done, but asap ideally.

construct and instal gate to existing deck. The open side of the deck other than the steps down to the yard is skirted by Stainless Steel Wire through timber posts. We require a matching gate at the level of the deck (opening is height 1050mm, width 1800mm - due to width of opening we would want two gates). we can supply all materials with your direction.

Require a new timber fence to be erected along the side of our home. Right hand side boundary fence. Cement stabilised posts. Height 1.95m. Length 36.6m. Next door neighbour is happy to keep the remaining standing fence. Would like it completed as soon as possible, but am flexible with dates. Budget is $2600-$3000

I need a handyman to nail back fence

The latch on my gate has become detached from one side of the gate and requires redrilling/perhaps repositioning of whole latch.

Fence is falling in slightly so it just needs to be fixed to the bricks. The other side where little gate is- is also wobbly so a quote for that would be good while your doing the other bit.

Looking for experienced contractor for post and wire fence installation for a 2000sqm block.

I need to extend my boundary fence height to make my pool compliant. I need to extend a minimum of400mm high and min 3m long. Aluminium slats would suit

Hi I'm looking for a quote for a new front picket fence that is 1.4 m in height and approx 12 m length.

Timber fencing for a rectangular block in Fyansford development. 32m x 12.5m Require quotes for both sides and back fence.

The person will need to install a 1 metre (approx.) aluminium fence and gate to a space that is 375cms wide. We want someone who can complete an aesthetically pleasing and structurally sound job ASAP.

New clothesline needs to be installed in backyard, will need to cement posts into the ground. Daytek clothesline ‘ground mount kit’ around 2m.

New gate has been installed, steel frame. Need to fix timber palings to gate. Gate approximately 6/7 metres long. Approximately 1 days work

I need someone to remove (angle grind) the old wire mesh and metal decoration off the top of existing gates and fence. Keeping the existing timber posts. I would then like someone to buy, fit and attach steel reinforcing mesh (same as used for strengthening concrete slabs) to the old timber posts.

Hi I need 8 timber posts installed for fence, must be 600ml deep holes fence to be 1.5m high, must be straight

Approx. 14m fence with two gates on a sloping block needs to be measured with gradient. Measurements to be given to Think Fencing who will construct fence.

We live in Grovedale and have recently had a 1.05m high fence with gate installed via Airtasker. The gate and post it’s attached to have come away from the brick wall and need to be re-secured preferably in the day or so. I can send through some pics if you like.

I need 3x 2.4 mtr Fence Extensions collected from Bunnings (waurn ponds) with appropriate number of: 40mm galvanised screws 75mm galvanised screw Fence nails What you will NEED to supply: Impact driver and Philips head screwdriver and hammer or nail gun to fix a number of loose pailings   Expexience or knowledge in this work, this is not my fence so it needs to done correctly

Would like someone to assist repositioning and fixing one post in our fence. And then securing any palings that have come off. Hoping we don’t need any new materials. About 3m of it is leaning.