Find a fence installation professional in Cannon Hill

Extend existing fence to front fence as per picture 4100mm length - Due date: Before Sunday, 19 March 2023

I have a wrought iron gate (swinging) with 2 posts Posts need to be concreted in the ground - Due date: Before Monday, 20 March 2023

Install a gate it is a metal gate everything is ready to be installed - Due date: Flexible

Need a standard Bunnings Pool gate in stalled between corner of Standard Pool fence and wooden fence post. About 1cm out from width of top to bottom, so will needs some adjustment.

Looking for someone to install and supply 2 side gates - one on either side of the house. Wanting a simple wood fence aprox. 1.8m tall. Thanks

Pull down and remove 2 fences including rails, posts and old wire mesh. One side boundary metal fence and one rear boundary wood and metal fence. See pics. Side metal fence should be recyclable. Install temporary fencing 0.5m (500mm) from current fence on neighbours properties both side and rear. Yes I have permission from both neighbours. I will provide the star pickets, orange mesh safety fencing (see pic) and zip ties. Do NOT disturb boundary pegs. Will most likely require an angle grinder. No power available. Make an offer! Price negotiable. Confirming rear fence is approx 15.5m long and side fence is approx 45m long.

Dogs keep getting in under the house, need a gate built to keep them out. Opening is 2300mm wide.

Install sediment barrier 16 metres long on vacant block I will provide the stakes and sediment barrier (silt woven polypropylene barrier). You will need nails or staple gun to connect the barrier to the stakes. Not the barrier goes on the internal side (block side) of the stakes and not the road side. You will need to dig trench to bury as per below requirements. Meet Qld requirements: 1. Bottom of barrier buried 2. Support posts no longer than 2m apart 3. At least 450mm high above ground Do not move or impact upon survey pegs.

Retaining wall between two properties - 26Lm long x 1m high with a smaller 6Lm section tapering from 800mm high to 200mm high. To be built with 200mm high concrete panel sleeps and galv universal columns at 2m centres with fence post connectors to tops of columns to receive a colorbond fencing at a later date.