Find experienced local fencing contractors in ACT

The gate to my chicken run keeps blowing open because the latch is dodgy. I'd like someone to either fix or replace it so the chooks are secure.

Replace a dividing fence between two units in Oxley 2903. About 20 m in total: a 2 m return from the house wall out to the boundary, then 18.3 m along the boundary in three straight legs with two corners. 1.5 m high treated pine palings, rails top and bottom, all new posts concreted with frost-depth footings (600 mm min). One end ties to an existing brick pier. The old fence (rotten hardwood palings, vine cut off, posts concreted) is still up. Please give two prices: one with you removing and disposing of it, one with us doing that before you start. Old footings can stay in the ground either way. Flat site, easy access from the lawn, parking on the driveway. Materials: [EITHER: supplied by me, delivered to site, so this is labour only / OR: please include supply in your offer]. Need it done by 25 September; site is ready now. In your offer please say how many days, whether you have a post-hole auger, and include a photo of a recent paling fence you've built. ABN and public liability please.

I need a simple single swing gate (roughly 85 x 115cm) installed in the chain-link/wire fence in the garden that matches the existing fence style. This may include installing a new fence post as well. For the quote please include the costs for the fence post (if needed), the gate (basic galvanised gate, no automation or fancy ironwork) + labour. Thank you.

I want to relocate the gate from the back of the carport to the front of it.

Replace broken timber garden gate with an aluminium gate (I will supply a kit from https://supergates.com.au/product/fenstar-pedestrian-gate-kit-horizontal-nightsky/ or similar). New gate posts will need to be installed but the original ones can remain as they support dog fencing inside the hedge.

My small garden has a wooden fence and several of the planks are falling off. I reckon I need less than 1 hour of a handyman's time to nail the planks back where they should be. Have received a quote for a colorbond replacement but WOW that's expensive! So looking for a cheap quick fix.

I would like my garden fence reinforced, there are loose panels which need a nail gun to secure them. Quick and easy job.

I need some wire removed from ~10m of fence structure and then bamboo-type screening wired/tied on. It will require a bit of navigating the garden bed and some problem-solving to do the screening effectively on a gate. I think I have all the supplies needed and estimate the job will take ~3-4 hours. I need it done by 25 Sept but can be flexible about timing.

We have an existing above ground veggie garden that we would like to have modified with sides and top to keep dogs/birds/mice out. See photos of what we have now vs what we are looking for. Also needs a secure gate. Flexible budget

Construct a double garden gate (two gates closing on each other), each gate approximately 1.585 meter high and 0.88 m wide. They should consist of good quality timber boards, rounded at the top, and attached to a suitable timber or steel frame. The gates should have a keyed lock, preferably a Lockwood brand. The gates need to be installed, and attached to a brick garden wall on either side.

Install a new green colourbond gate to create a rabbit run down the side of my house. Quote needs to include both time and materials. - Due date: Flexible

An existing fence panel and two posts need to be moved to adjoin another row of fencing - Due date: Flexible

Due to the wind the metal colourbond sheet has come off the frame & the bottom part fixed to the frame has snapped off. Need someone to fix it as soon as possible. - Due date: Needs to be done on Thursday, 5 January 2023

We would like someone to install 2 timber sleepers at the base of a colourbond fence to prevent our dog escaping. Length approx 180cm x 2. Will need to be cut to fit We will purchase materials, but will need you to collect from Bunnings with ute or trailer

I need to divide our garden gate in two parts so that only a small portion of the gate opens instead of entire gate . Need it before the end of the year - Due date: Flexible

I need to build pet enclosure in backyard - timber frame - wire on side (i have it) - colorbond roof (i have it) I need it done soon

Pretty simple job I imagine. Just need 2-3 cat steps made and attached to one side of an outdoor wooden fence. I’ve included pa picture below of the fence and another picture of what I imagine them to look like. Might need a third step close to the top as our fence is spiked. Also replace missing fence pail.

Need my dogs nail's done. I don't have nail clippers but I have a muzzle too put on him if needed.

The back (brick) fence which borders reserve is too low to keep in our dog. The fence, and also the gate will need some type of extension installed to make them higher. The wall is 6m 40cm long, and the gateway is 94cm wide. I’m open to suggestions about what materials to use and will provide all materials. Not sure about how long the job will take, so also negotiable on price to pay for your labour - but prefer quotes for firm price rather than hourly.

I want to install cat netting to secure my yard for my recovering cat (he got hit by a car after getting out). Looking to cover the gates with cat proof netting and use extension rods on top of existing brick fence to attach the netting to. I'm ordering netting from catnets Australia. I want to start with the Gates, and then do on top of the brick. I don't know what's best to attach the netting to the gates with - I can get what's needed but need advice. Price is assuming two hours to do the gates and make a plan for the brick fence.

Help me secure chicken fence from my dogs. Move a star picket. Make it secure along the ground

Nail clipping for two greyhounds

I am looking for someone to reinforce my wooden fence so a dog cannot dig under it. This will require digging down and installing reinforcement (with wood or wire/mesh) attached to the fence. There is about 7m of fence to do. I am happy for you to come inspect and quote in person. Please quote inclusive of materials.

Install 30 meters of prefabricated iron fence including concrete posts. All materials provided.

We need the parameter secured so the dog does not go onto the road parts of it. Need a fence a gate in certain areas and other bits to be patched up. See photos for details.

Install dog door in timber fence

Remove existing fence and gate around dog run and install new higher fence with a gate. Approximately 10 metres of fencing plus gate. - Due date: Before Sunday, 10 December 2023

Star pickets to be hammered into ground and dog proof wire attached to them. - Due date: Flexible

The gate is as in the picture. The larger door is off balance and leaning down and scratches the ground

Looking for the urgent installation of 9 linial meters of colourbond, including sleeper base and removal of existing wooden fence. Need done asap and have an existing quote but the company is unable to complete the job in the desired timeframes and before commencement of a large scale project. Also would like quote for matching gate with lock. All maximum height possible. Many thanks

Need to move the fence slight on one side attached to the wall.

I’m looking for someone to extend the height of my existing Colorbond fence by approximately 600mm. The total fence length is around 15 metres. Please provide a quote for labour and materials, and let me know your availability.

I need to replace a timber fence in the back with colorbond. It's a straight 17m fence with 3m gate on the side.

I have a double gate. On one side the panel has detached from the frame, and the frame has also come apart at the top corner on the same side. I don't know what's involved in fixing so let me know if you can do it and give me your offer.

Colorbond side gate needs repair. 1.8m x 1.6m Is partly broken in the bottom corners and the gate warps when you try to open/close it.

I’ve done plenty of Colorbond fencing jobs myself, but I’m currently looking for an experienced Colorbond fencer to work with me on a job in Chisholm. The job involves approximately 40m of Colorbond fencing with one single gate, to be completed on Saturday 5th and Sunday 6th September. Ideally, I’m looking for someone who is experienced, reliable and has their own fencing tools/gear. If you’re available on above mentioned date and interested, please send me a message with your experience, availability and price.

Looking for someone to supply and install a solid panel/wooden fence extension onlf existing fence to reduce noise from my heat pump hot water system. Need lining of noise reduction foam or noise absorbing coating/ screen Details: • Panel approx 2.1 m high × 1.0–1.2 m wide • Installed on fence opposite the unit (narrow side walkway) • Must keep walkway clear and allow access for servicing • Optional: include acoustic backing (rubber/foam) for better noise reduction Goal is to reduce noise toward neighbour (currently ~5–8 dB above limit). Budget: $300–$600 (open to quotes depending on materials) Located in Canberra. Photos available.

Color bond fencing and gate

Replace 25.5m palingfence with cream Coourbond fence panels.

PLEASE FEEL FREE TO MAKE OFFERS - Not sure what the usual cost is and looking to compare multiple quotes. Hi, I would like to instal Colourbond fencing in my back yard in the Paperbark colour. There are 2 fences to replace and they are approx 5 metres long. So *roughly* 10m in total (I still need to measure). You would need to supply and transport all materials and equipment here. I need to get approval from strata first so this job wouldn’t be happening right away, but I’m very flexible with times so could work out a day that suits you. It needs to be done very well and solid enough for keeping pets inside, so please only make offers if you have done this type of job before. Thanks in advance

Our trailer has been reversed into our colourbond fence and 3 panels require replacing

The gate scrapes on the concrete driveway when fully open. The driveway slopes a little and is being raised by roots from a neighbors tree. The concrete has been previously ground but a longer term solution is to raise the gate on its hinges. I cannot stop the concrete being lifted by a tree root. As far as I can tell the posts are in good condition and the hinges and gate are also solid. I should say that there are 2 parts to the gate. So 4 hinges in total.

My colourbond gate needs repair/ replacement. It has cracked along welds, dropped and warped. I think that maybe a pedestrian gate might stop this happening again.

I need to get one side of my back yard done

I will supply the materials. You just need to install.

Looking for an experienced installer to supply and install a Colorbond side gate and panel for side access of house including lokklatch. • Total opening width: 1.5 metres • Posts to be either concreted or securely bolted to slab • Height approx 1.5–1.8m (open to recommendation) • Must be level, secure and neatly finished

- Remove existing timber fence - take away all rubbish - install 1.8m by 33m color bond fence. - The site will be ready for the fencing project from the 15th of March 2026. - Photos are not available right now.

Need someone to put back together a colorbond fence panel. It was removed to lay a new lawn. All the pieces are there ready to go. Need done asap