Find experienced local fencing contractors in Canberra Central

Construct a double garden gate (two gates closing on each other), each gate approximately 1.585 meter high and 0.88 m wide. They should consist of good quality timber boards, rounded at the top, and attached to a suitable timber or steel frame. The gates should have a keyed lock, preferably a Lockwood brand. The gates need to be installed, and attached to a brick garden wall on either side.

Seeking someone to supply and install chain wire fence, along with a gate for the back of our property. 17.2 metres long.

Need a few pavers replaced before pool fence installed. See spigot holes already drilled. Also some of the fence post holes may need infilling. Have my own spare pavers. Ok for quote to wait until area inspected.

I am looking for quote to install 1.8 m height colourbond fence with sleepers. Fence will be around 70-80 m. Would need to find out exact boundary line to install the fence

I have a section of garden that I want cleared and I’d like a 10 meter by 2 meter high section of fence built. To secure my backyard for my dogs

I need a colourbond fence and gate taken down and disposed of. Posts are cemented in the ground. I have included many photos that show where the posts are embedded. There are 4 posts in total but I have taken photos of either side of the fence. The end of the fence buts up against the neighbours fence. Not sure if this is an issue. I would like the fence posts cut down and ground down to level so as not to pose a trip hazzard. - Due date: Before Saturday, 9 March 2024

Need a three meter high fence built. It’s wire and steel posts - Due date: Needs to be done on Wednesday, 7 February 2024

Six metre or do One side other side may need a gate ?

Double swing colourbomd gate install. Materials are already on-site. This is purely just an install with materials on-site. - Due date: Flexible

supply and install of 21m of 1.8m high colorbond fence. - Due date: Flexible

Timber fence is missing about 6 palings and needs to be reattached to a support post. Flexible as to timing. - Due date: Flexible

The fencing at the house needs replacement. One side is 6 mtrs and the other side is 6 mtrs with lap fence and a gate. At the front of the house approx 25 mtrs of fencing to be installed with 1 mtr height of wire mesh fencing. - Due date: Before Saturday, 29 July 2023

quote 1 is the install of a 14m length by 2m high with sleeper under the fence. The second part quote 2 is for 5.5m length by 1.8h fence. - Due date: Flexible

Fence two metre Gate one metre Total 3 m - Due date: Needs to be done on Saturday, 17 June 2023

We are looking to install a panel fence with gate. Approximately 3 x 3 x 10 m - Due date: Flexible

Woden fence is in bad shape. Needs to be fixed so that my dog can not escape the back yard. In the photos you’ll find one side I fixed myself that has kept my dog from escaping there. :)) - Due date: Before Saturday, 25 March 2023

I currently have a gate between a chain wire fence, I need the gate removing and the chain wire fence to be added in where the gate was. The dimensions are 3m x 1.5m - Due date: Before Thursday, 23 February 2023

Install 5 concrete footing for large timber posts the be fitted and bolted onto. Must have insurance and builders licence. - Due date: Before Monday, 20 February 2023

Need someone to build a fence with a gate to fence in part of my pergola. I will supply the materials. Roughly 1.1 m off a brick wall, then a post needed to change angles for just under 5 m with a gate in the middle or so connected to a wooden beam holding up the pergola. I'm thinking of using metal pool type fencing from Bunnings. The fence would come off of a wooden pergola base. In Wanniassa

Would like to fill in the gaps of our fence for privacy by adding a second layer of slats. Fence is 180 x 300cm x 2 (as we would like to do this on both sides of our courtyard). Neighbours on one side have already done this but we’d like to do both sides anyway so they match. - Due date: Flexible